Author Topic: What a Hatsan Supercharger .22 can do... (Read 11553 times))

microsalmo · « **on:** July 17, 2012, 10:58:22 AM »

WHEN I DON'T DO MY PART - 20 YARDS

WHEN I DO MY PART - 20 YARDS

WHEN I DO MY PART - 20 YARDS

WHEN I DON'T DO MY PART - SHOOTING FOR SPEED AT 30'

WHEN I DO MY PART - 30'

WHEN I DO MY PART - 45'

WHEN I DO MY PART - 45'

dukemeister · « **Reply #1 on:** July 17, 2012, 11:00:52 AM »

Well, that IS impressive.

longislandhunter · « **Reply #2 on:** July 17, 2012, 11:13:28 AM »

Very nice shooting. They are indeed impressive pistols, I know I love mine

Bought mine to take into the tree stand with me during bow season so I can harvest the nutters that are always all around me. Mine shoots groups as nice as yours, if I do my part, they are nice pistols with plenty of power as well.

Thanks for sharing the pics with us.

Jeff

supertech77 · « **Reply #3 on:** July 17, 2012, 11:37:21 AM »

yes that is what mine can do too but at 15yards ; with the sites and the laser mounted under the barrel..

..,if i had put a scope on it no doubt that this gun wood do the same at 20 and 30 yards,if as you say we do our part.and it has good power for sure.love this pistol

RC1947 · « **Reply #4 on:** July 17, 2012, 12:16:44 PM »

Nice shooting! I've got the Browning model which I enjoy shooting. Excellent pistols. RC

microsalmo · « **Reply #5 on:** July 17, 2012, 12:41:25 PM »

Thanks guys. I figured we needed to show the Supercharger some love after that last thread.

I agree... with more scope, this gun could be accurate out past 30 yards. The 2x scope would only let me see right out to 20. Drop wasn't bead either. When sighted in at 20 yards, 30' shooing was just 1/4" low or so.

What a great pistol.

RC1947 · « **Reply #6 on:** July 17, 2012, 01:21:03 PM »

I've been shooting mine for quite a while, and suggest removing the grip assembly and tightening any screws which may have come loose. I will occasionally find one particular small screw, that seems to hold a spacer, that needs tightening. Next time, I'll super glue the threads. RC

fortyshooter · « **Reply #7 on:** July 17, 2012, 02:16:34 PM »

That is very good shooting for both man and machine!!!

microsalmo · « **Reply #8 on:** July 17, 2012, 02:55:56 PM »

thanks & thanks

will check the undercarriage ...

the shooting wan't hard - the gun isn't hold sensitive at all

RC1947 · « **Reply #9 on:** July 17, 2012, 03:22:32 PM »

There have been several suggestions online to shim the breech seal. It looks like an 0-ring, but it fits deeper than a traditional o-ring. Dramatic increases in velocity have been noted, bringing the gun closer to what it specs at. I removed the seal using a thin pin, working it around the OD of the seal. I took another fellow's suggestion and took a 3" piece of plumbers Teflon tape, doubled it, then twisted it tight. Cut the length to fit around the circle, drop it into place and re-seat the seal, and press it down. Gives about 1/64" more height. I don't have a chrony, and so, I don't know the result. Just wanted to pass it on. RC

https://www.pyramydair.com/blog/2009/09/browning-800-mag-part-3/

microsalmo · « **Reply #10 on:** July 17, 2012, 05:03:52 PM »

great idea...after 500 + shots, mine is 11 fps slower than the advertised 600 with 11.9gr pellets. i might just try that. power is plenty thought at 9.74 fpe with RWS Superdomes

Nomadic Pirate · « **Reply #11 on:** July 17, 2012, 05:51:34 PM »

Yep, this is a pistol That isvery easy to shoot accurately.

Your shooting there is exceptional

microsalmo · « **Reply #12 on:** July 17, 2012, 10:01:27 PM »

Thank you Nomadic Pirate. Check out the power & consistency this thing records...

RC1947 · « **Reply #13 on:** July 17, 2012, 10:44:52 PM »

Perhaps you needn't bother changing the height of the seal, since that thing is pretty efficient, good work. It's nice that a new pistol has enough interesting about it to gab about. When I take breaks from reading, I go down cellar and chase a target with mine. Not being able to resist, I ordered a refurb Ruger springer pistol. I'm looking forward to that. 5-day shipping to here. RC

microsalmo · « **Reply #14 on:** July 18, 2012, 07:29:36 AM »

I was in Darian, CT last week visiting my sister. Far from you?

RC1947 · « **Reply #15 on:** July 18, 2012, 10:58:27 AM »

Quote from: microsalmo on July 18, 2012, 07:29:36 AM

I was in Darian, CT last week visiting my sister. Far from you?

Not very close, but then. it's not a very big state. RC

Thudnutz · « **Reply #16 on:** July 19, 2012, 03:20:12 AM »

I received my HATSAN Model-25 Super Charger Wednesday afternoon....(mine's a .22-Cal), and my health and the weather didn't permit more than a
quick inspection...so a couple of questions to those of you who already own
one: When I removed the 1/2 Inch muzzle tip, to mount the Cocking-aid Tube,
I noticed a 'chewed-up, "O" Ring which must have 'fallen-off' when I unscrewed the
muzzle tip. Is this "O" Ring necessary?..(it was 'chewed up into too many pieces to
determine the size , and should it be replaced (?Size?)
Secondly, is there a serial # on the gun? and where is it located on the
gun?
I see Rick Eutesler (AirGunWeb) did a review of the gun....(in .177 cal)...he
mounted a BSA 'Edge' 2 X 20 Pistol Scope on a 'Leapers' 11-mm Offset Mount'...
wonder what 'cha all think of that mount set-up ?

Thanks....

"THUDNUTZ" (Jerry Robinson) in Duluth, MN USA

Beeman R-1 (Santa Rosa)(HW-80) .20-cal Rifle / 'Beeman SS-1' 2.5 X 16 Short Scope
TechForce QS-35 .177 Cal UnderLever Pistol
TechForce S2-1 'West Lake' .177 BreakBarrel Pistol (What a Laugh!)
RWS/Diana LP-8 Magnum .177 BreakBarrel Spring Pistol, with BSA 2 X 20 Pistol Scope
Crosman 2250B .22 cal CO-2 Carbine
Crosman 38T CO-2 Pistol Revolver .177 Cal
Crosman 357W6 CO2 Pistol Revolver .177 Cal (I've added the 'original 8-Inch Barrel' - (Love It) !
Beeman P-17 .177 Cal SingleStrokePneumatic Pistol
HW-40 PCA .177 Cal SingleStrokePneumatic Pistol
HW-45 .20 Cal Spring Piston Pistol
Webley 'Alecto' .22 Cal MultiStrokePneumatic Pistol
HATSAN Model-25 SuperCharger .22 Cal BreakBarrelPistol

Shooting Chrony F-1 (Green Model) w/ indoor lighting fixture

microsalmo · « **Reply #17 on:** July 19, 2012, 07:08:40 AM »

My o ring was also chewed up. I found another at the hardware store... harbor freight tools.

I used that mount and scope for the above groups. I like it.

DKT88 · « **Reply #18 on:** July 19, 2012, 07:34:36 AM »

It seems very accurate.

RC1947 · « **Reply #19 on:** July 19, 2012, 02:13:42 PM »

Since my UTG adapter still creeps to the back of the dovetail, I broke down and ordered a BKL-568mb adapter which has 6 tightening screws. A bit pricey, but it should do the trick. I'll use the UTG for the Ruger which is coming tomorrow. RC

Thank you to our advertisers!

What a Hatsan Supercharger .22 can do...

Author Topic: What a Hatsan Supercharger .22 can do... (Read 11553 times))

Nomadic Pirate