Author Topic: My Chinese rifles (Read 103920 times))

Brutuz · « **Reply #160 on:** January 27, 2013, 07:35:44 PM »

Thanks Jon, enjoyed collecting every single one the past few years, listed them all here http://www.brutuz.com/ but stopped adding them all up once I crossed the 50 line

Sheridan 74 · « **Reply #161 on:** February 01, 2013, 12:43:40 AM »

Well I've spent way too much time this evening reading this whole thread and I'm glad I did, I thoroughly enjoyed it.

Thanks very much for sharing.

Jeff

Brutuz · « **Reply #162 on:** February 01, 2013, 04:24:01 PM »

Thanks Jeff, the thread will stay live, just ordered this one

German specs, 7.5 joule power, might have a transferport restriction which needs attention and will need longer spring to get shooting a bit faster

Brutuz · « **Reply #163 on:** February 03, 2013, 05:41:26 PM »

Quote from: Brutuz on January 24, 2013, 05:35:41 PM

Bought this one bottom of pic

10 meters, indoors, rested:

RWS Supermag

JSB Exact Diabolo

JSB Exact Express

Kailua · « **Reply #164 on:** February 03, 2013, 09:02:47 PM »

Wow looks like you got a shooter.

Brutuz · « **Reply #165 on:** February 05, 2013, 12:50:22 PM »

It arrived this afternoon, very nice rifle

Trigger has a large pull, needs attention

safety is auto

No transferport restriction, tried a smaller 3mm disk behind the piston seal, shot abt 25 fps slower compared to the out-of-the-box string below:

Will change the spring and add a delrin powerband and delrin slipwasher and see what it does.
Not now as I'm using meds because of a back problem.

BrainsB4Beauty · « **Reply #166 on:** February 06, 2013, 12:32:59 PM »

That 26 is a beauty

triggerfest · « **Reply #167 on:** February 06, 2013, 04:46:24 PM »

Nice purchase again Brutuz

Video ?

Brutuz · « **Reply #168 on:** February 06, 2013, 06:18:10 PM »

Quote from: rudeboy on February 06, 2013, 04:46:24 PM

Nice purchase again Brutuz Video ?

Not yet, it's comming along nicely:

But the spring guide needs a tweak first

Brutuz · « **Reply #169 on:** February 07, 2013, 03:36:47 PM »

Quote from: Brutuz on February 06, 2013, 06:18:10 PM

But the spring guide needs a tweak first

Done

Brutuz · « **Reply #170 on:** February 09, 2013, 05:35:07 PM »

Am going to do a bit of outdoor target practice this Sunday

Brutuz · « **Reply #171 on:** February 12, 2013, 06:48:56 PM »

Have been shooting the Norconia B88 sidelever (QB58) outdoors last Sunday

Proved to be rather accurate, even using open sights @ 10 meters, believe me, the bull is tiny at that distance

Shooting sitting, elbow supported on a table: excellent grouping

Shooting standing, no support the group opened up but not bad at all

The B88's trigger is good too. Out of the box a very long pull which I shortened a bit by slipping a delrin bushing over the trigger pin and setting the adjustment screw to my liking.

Also took a few shots at a spinner target w. my SMK 25 break barrel air pistol (Xisico SXP180)

Hit and miss, most of the shots were hits though. Haven't had much practice w. this pistol yet but it's a nice shooter with a good trigger.

Was a nice and snowy day to shoot, temp around freezing point.

To keep the vid interesting actual loading and aiming have been edited out.

Tinknocker1 · « **Reply #172 on:** February 12, 2013, 06:59:53 PM »

that QB 58 looks like a fun little gun ...

nice job Brutus i enjoy your video's

Brutuz · « **Reply #173 on:** February 14, 2013, 06:51:41 PM »

Thanks Andy

mikeiniowa · « **Reply #174 on:** February 14, 2013, 08:16:28 PM »

What does one cost for you Bert?? I have them priced at around $100US.....

Brutuz · « **Reply #175 on:** February 15, 2013, 03:15:19 AM »

Quote from: mikeiniowa on February 14, 2013, 08:16:28 PM

What does one cost for you Bert?? I have them priced at around $100US.....

117.28 US$ incl (21% tax)

Brutuz · « **Reply #176 on:** March 02, 2013, 10:22:22 AM »

Bullit · « **Reply #177 on:** March 15, 2013, 08:53:26 PM »

Great thread Bert, and videos, as usual! Hope you're getting some shooting time in. Enjoy!

uglymike · « **Reply #178 on:** March 16, 2013, 09:50:08 PM »

I've been following this thread for some time now, very informative, excellent work! Kudos

Brutuz · « **Reply #179 on:** March 18, 2013, 07:47:19 PM »

Thanks guys

After ordering an XS60C from Mike March 2011 the rifle was confiscated by Dutch customs.

Have been interrogated by Dutch police November 2011 and made my point by showing pics of the Crosman 1077 and Hammerli 850 AirMagnum which are sold in the Netherlands, officer agreed, no case.

Nevertheless the public proscecutor thought she had still a case and I had to appear in court July 2012, the verdict was not guilty (taxpayers money down the drain). The judge did warn me tough not to order from outside of the Netherlands again if the rifle in fact was not available in the Netherlands. His verdict could easily have been guilty, but the public prosecutor presented a screendump from the Chinese manuafacturer assuming it was a firearm. Very easy for me to prove she was wrong.

Irony in this matter is that she most probably got the info from the Chinese airgun portal I have set up myself.

March 1, 2013 received a letter from the police stating I could collect the rifle within three weeks, if not it would be destroyed. Talking about impudence.

Picked it up immediately. Received it unboxed, stock damaged, bolt handle missing which had been stored inside of the co2 tube for transport reasons, they must have taken it out and lost it.

Replaced w. a 78 deluxe goldplated bolthandle, gassed it up and it shoots like a gem, +700 fps in .177 cal w. Superdomes...

Thank you to our advertisers!

My Chinese rifles

Author Topic: My Chinese rifles (Read 103920 times))