Hatsan tuners

[Kailua]

For those who have taken their Hatsan springers apart.  Has anyone listed the measurements and dimensions of the spring and seals for aftermarket replacement info? 

[Tarheel]

For those who have taken their Hatsan springers apart.  Has anyone listed the measurements and dimensions of the spring and seals for aftermarket replacement info? 

Which model are you asking about ?

Dave

[Kailua]

It would be just for general information towards any Hatsan spring model.  I could or we could just keep it recorded for reference.  Much concern that springs and seals cannot be purchased from suppliers.  Figured there may be aftermarket solutions that may be brought to light before a puchase of a Hatsan.

[Tarheel]

It would be just for general information towards any Hatsan spring model.  I could or we could just keep it recorded for reference.  Much concern that springs and seals cannot be purchased from suppliers.  Figured there may be aftermarket solutions that may be brought to light before a puchase of a Hatsan.

Kailua,

That's a very good idea . . . Originally, I thought you were posting about a particular model.

Dave

[Mike 4888blues]

I can make notes on the springs  as I get them in to do the tunes and ram/ tune conversions.
the seals are from j m for the snipers''  and magnum 116 discovered that daisy makes the same seal that fits the hatsan mod  95. and I believe one day parts will be available
Mike

[Kailua]

Mike that would be cool if you would post what you have found in future tear downs.  Like some I would be frustrated to buy an air rifle and couldn't get a part especially a maintainance part like spring or seal.

[Mike 4888blues]

Mike that would be cool if you would post what you have found in future tear downs.  Like some I would be frustrated to buy an air rifle and couldn't get a part especially a maintainance part like spring or seal.

 Sure I think that's a good Ideal letting  others know whats under the hood.

 well if some one can take a rifle apart they have to stay on top of what there doing, like in the case where the end peice  was holding the spring back .

the piece  was s snug fit and  with the spring pushing  it cocks  it enough to cause it to jam, but that's no reason  to not buy a rifle, it just means you need  to take your time to work it out and be careful  the end piece doesn't give  and everything come flying out  at  you..
  working on cars is  the same you have to be careful and know what your up against.
 

[Kailua]

Well put advice Mike.