Made some cleaner versions of the Steroid 15 and Gamox5 targets

[timegoat]

Dunno if anyone else gets kinda annoyed by the pixelated lines on the Steroid 15 and Gamox5 targets, but I came up with some cleaner versions of them. They can be fine tuned somewhat, but I tried to get as close to the originals as possible. Dunno if I got the line weights right but the basic dimensions look pretty good. I used MS Publisher and exported them to PDF.

Line weights on both are 1pt. Publisher is limited in some ways, so I couldn't get any lower than the 4 ring on the Gamox5.

Dunno if they can be used in the matches. Let me know if they're any use and / or if I need to make adjustments. I can do the same for any other targets that are a little hazy (I think). I don't shoot any of the pistol targets but, if need be, I'd be happy to clean them up too. I like making targets.

- Mark

[gamo2hammerli]

Mark, that`s very good....those targets are nice and clear.  Now, I`ll need to finish off my 70+ something sheets of them before printing your new ones.

[timegoat]

Thanks! I guess they're up to snuff enough for match use? I haven't printed out any myself cause I don't want to waste my good target paper if they're not. But I do want to use 'em.

- Mark

[Big_Bill]

WOW timegoat !!!!

They really look GREAT !!!!!  I hope they help increase ALL of OUR scores

Thanks for all your help and time making up these great looking targets !!

I look forward to shooting them, I think I'll do better, especially with the Steroid-15 targets

Bill

[timegoat]

You're very welcome! I'll take a look at the pistol targets and if any of them are fuzzy I'll give 'em the same treatment. Of the matches I shoot these were the only two that kinda got under my skin. I've said it before and I'll say it again, you guys gave me a place to target shoot with others and I'm more than happy to give back.

I'm working on some 10m and 50ft targets based on the NRA target dimensions, I'll post those too when I get them fine tuned.

- Mark

[PA1911]

Great work timegoat!

I'll be using these when I get my Marauder

Shawn

[Toolmaker]

 Thanks! Those look great!

[timegoat]

Shawn and Matt, thanks and you're welcome!

I took a look at the pistol targets and as far as I can tell it's either the Gamox5 or another clean looking target from glockfaq. Unless I'm mistaken, my work here is done.

- Mark

[Jeff D]

Another WOW. Those are nice and sharp. Unfortunately I have 100's (yes, multiple hundreds) of most of the match targets printed. I considered it part of my severance from my previous employer :-).   That computer bag I carried home everyday contained a a couple hundred target prints way more than a laptop for the last month of so.

I'll be back in the match in the next round.

[timegoat]

Thanks Jeff. No comment on your 'severance packages'.

- Mark

[Bremen]

Great Versions of these targets, thanks! They are a help for someone who is visually impaired like myself

[Daysailer]

Hello,
Want to start shooting in some of these online matches.
When I print the targets, it seems like mine are not coming out the correct size.

Could someone post the size, in inches, of the white bull area, or the size of black (6 ring) so that I can have correctly sized targets ?


Thnks....DS

[timegoat]

Daysailer, the white bull on the 10yd standing should be 1" in diameter. Same with the whole bull on the Steroid 15. I set em up so that you shouldn't need to do any scaling at all for accurate printout.

Hope this helps!

- Mark

[Daysailer]

Mark,
Thank-you.

One of my printings came out 1" and my next one was 15/16"
I will get it sorted out

Thanks for all you do here......DS

[Daysailer]

Setting the "page scaleing" to NONE solved my issue

Thanks again.     DS

[timegoat]

Yer very welcome! Glad ya got it sorted out.

- Mark