Ordering new walter falcon hunter trigger?

[Mike 4888blues]

 Is it possible to order a new  complete Walter falcon hunter trigger?
 do you think pyramid air  would  get me one?
 
Thanks

[Smackey54]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

[Mike 4888blues]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

Hi
 I just bought a WFH  / .22  in camo for 125.00 with its scope the seller said the trigger was not working properly that it should be replaced, he said it has no cracks or other issues//
I could not refuse  to get it/ shipping cost another 30.00

[Smackey54]

I will bet there is a spring missing or out of place on the trigger. Not hard to fix. You can probably fix it for less than $2 and about 30 minutes of effort. Could also be a pin missing.
Congratulations! No wonder he would not respond to me! With $30 shipping, it had better be shipped priority and with insurance. I suspect it would cost only about $25 to ship that ...and around $20 for parcel post.

[Mike 4888blues]

I will bet there is a spring missing or out of place on the trigger. Not hard to fix. You can probably fix it for less than $2 and about 30 minutes of effort. Could also be a pin missing.
Congratulations! No wonder he would not respond to me! With $30 shipping, it had better be shipped priority and with insurance. I suspect it would cost only about $25 to ship that ...and around $20 for parcel post.

 I am in Montana, he is in eastern pa.  so  iam thinking if he charged me more its ok, should of been around 22.00 tops i would think

 yes  I thought i was lucky today, I did not expect  to wake up and buy a rifle I already have a hatsan on order from richard
 the seller shipped it already. he just emailed me and told me they charged him 50.00  for shipping stating the box was over sized  and asked if i could chip in   gracious..
 how come you tried to contact him

[Tarheel]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

Hi
 I just bought a WFH  / .22  in camo for 125.00 with its scope the seller said the trigger was not working properly that it should be replaced, he said it has no cracks or other issues//
I could not refuse  to get it/ shipping cost another 30.00

Mike,

Remember, there are TWO different triggers for the WFH.

(1) Original trigger . . . Without SAS

(2) Quattro trigger . . . With SAS

Dave

[Smackey54]

Mike:   I was looking to buy it...had made him an offer.

Dave:  There is another variety....SAS without Quattro. That is what mine is. That is a SAS with older trigger, by the looks of the picture on AOA classifieds. I have polished mine and replaced the upper sear spring with one just a little weaker, making the pull a little kinder.

[Mike 4888blues]

Mike:   I was looking to buy it...had made him an offer.

Dave:  There is another variety....SAS without Quattro. That is what mine is. That is a SAS with older trigger, by the looks of the picture on AOA classifieds. I have polished mine and replaced the upper sear spring with one just a little weaker, making the pull a little kinder.

This  w f h  did they all have the sas ,  Do you think a new quarttro trigger would just drop in even  if  it was not  original type of trigger?

[Bryan Heimann]

The quattro trigger version has 3 retainer pins in the tube, while the original trigger version has only one or maybe two i don't remember for sure.  They are 2 completely different models from Hatsan.  But, no, the quattro is not a drop-in on this one. 

[Smackey54]

Mike:   I was looking to buy it...had made him an offer.

Dave:  There is another variety....SAS without Quattro. That is what mine is. That is a SAS with older trigger, by the looks of the picture on AOA classifieds. I have polished mine and replaced the upper sear spring with one just a little weaker, making the pull a little kinder.

This  w f h  did they all have the sas ,  Do you think a new quarttro trigger would just drop in even  if  it was not  original type of trigger?

No. I asked the question when I got my WFH with SAS and older trigger. UMAREX said the receiver is different...and after having both the WFH and Hatsan 95 apart, side-by-side, I can see why. The quattro trigger upper housing is completely different and will not fit the older receiver. My original trigger was stiff, allowing little improvement through adjustment. I took it out, put a ball-point pen spring in under the upper sear, and polished the mating surfaces. I believe the Daisy/Winchester 1000 trigger is very close and there is a tutorial for tuning/repairing that trigger somewhere....a search might find it for you.
They are pretty simple and very ruggedly built.

Check out the safety in the picture. If it moves up and down on the rear of the receiver, then it is the older trigger. The Quattro is purely push/pull.

[Mike 4888blues]

 It would be great if parts were available like crossman lol I buy a new receiver and quattro trigger assembly  from the newer version 

what did  you fill your rear stock with or  did you leave it as is.
 

[Mike 4888blues]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

Hi
 I just bought a WFH  / .22  in camo for 125.00 with its scope the seller said the trigger was not working properly that it should be replaced, he said it has no cracks or other issues//
I could not refuse  to get it/ shipping cost another 30.00

Mike,

Remember, there are TWO different triggers for the WFH.

(1) Original trigger . . . Without SAS

(2) Quattro trigger . . . With SAS

Dave

Hi Dave/ you mean my model may not have the sas  design    / gracious  I hope I still like it

[Tarheel]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

Hi
 I just bought a WFH  / .22  in camo for 125.00 with its scope the seller said the trigger was not working properly that it should be replaced, he said it has no cracks or other issues//
I could not refuse  to get it/ shipping cost another 30.00

Mike,

Remember, there are TWO different triggers for the WFH.

(1) Original trigger . . . Without SAS

(2) Quattro trigger . . . With SAS

Dave

Hi Dave/ you mean my model may not have the sas  design    / gracious  I hope I still like it

Mike,

Right . . . It may not have the SAS.

I did not know there is a third variation that has the SAS with the original-style trigger.

(1) Original trigger, no SAS

(2) Original trigger, with SAS

(3) Quattro trigger, with SAS

I hope it all works out for you, Mike !

Dave

[Mike 4888blues]

You will probably have to go through UMAREX USA. If you email them with the part number, they will send you the price. Part number can be found on the exploded diagram on their website.
If you don't mind me asking, what is wrong with yours?

Hi
 I just bought a WFH  / .22  in camo for 125.00 with its scope the seller said the trigger was not working properly that it should be replaced, he said it has no cracks or other issues//
I could not refuse  to get it/ shipping cost another 30.00

Mike,

Remember, there are TWO different triggers for the WFH.

(1) Original trigger . . . Without SAS

(2) Quattro trigger . . . With SAS

Dave

Hi Dave/ you mean my model may not have the sas  design    / gracious  I hope I still like it

Mike,

Right . . . It may not have the SAS.

I did not know there is a third variation that has the SAS with the original-style trigger.

(1) Original trigger, no SAS

(2) Original trigger, with SAS

(3) Quattro trigger, with SAS

I hope it all works out for you, Mike !

Dave

Thanks Dave.
did you fill your stocks butt wit anything like  others have

[Tarheel]

Thanks Dave.
did you fill your stocks butt with anything like  others have

Mike,

I think I will use expandable spray foam from Home Depot . . .

Dave

[Mike 4888blues]

Mike:   I was looking to buy it...had made him an offer.

Dave:  There is another variety....SAS without Quattro. That is what mine is. That is a SAS with older trigger, by the looks of the picture on AOA classifieds. I have polished mine and replaced the upper sear spring with one just a little weaker, making the pull a little kinder.

This  w f h  did they all have the sas ,  Do you think a new quarttro trigger would just drop in even  if  it was not  original type of trigger?

No. I asked the question when I got my WFH with SAS and older trigger. UMAREX said the receiver is different...and after having both the WFH and Hatsan 95 apart, side-by-side, I can see why. The quattro trigger upper housing is completely different and will not fit the older receiver. My original trigger was stiff, allowing little improvement through adjustment. I took it out, put a ball-point pen spring in under the upper sear, and polished the mating surfaces. I believe the Daisy/Winchester 1000 trigger is very close and there is a tutorial for tuning/repairing that trigger somewhere....a search might find it for you.
They are pretty simple and very ruggedly built.

Check out the safety in the picture. If it moves up and down on the rear of the receiver, then it is the older trigger. The Quattro is purely push/pull.

Thanks for  the info.
I hope it is  at least the older sas  and  not the original  model.
I cant tel by picture  i saved from the listing  it wont zoom in with any clarity/ I am thinking being the seller is  not up on air  rifles  or he would  of fixed it him self,  that it may be a model not  that old  he finally got tired of it laying around and decided  to sell it.

He wasn't even up on shipping stuff, I told him he should of cut the over sized box  down  to save on wasted shipping cost. instead of trying to get me to pay for  additional charges it cost him50.00

 air gun depot  has refurnished WFH in camo .22  175.00 had I know that i may of went  that route.

[Tarheel]

air gun depot  has refurnished WFH in camo .22  175.00 had I know that i may of went  that route.

Mike,

If worse comes to worse, you could always use it as a "parts gun" in the future or re-sell it, down the road.

Dave

[Mike 4888blues]

air gun depot  has refurnished WFH in camo .22  175.00 had I know that i may of went  that route.

Mike,

If worse comes to worse, you could always use it as a "parts gun" in the future or re-sell it, down the road.

Dave

I was talking with magnum116 chris thru P M
 He believes  even if it not a sas  that in can be converted to one, and that possibly if  its  the older style I could get crosman trigger parts and use a cdt trigger/
 fingers crossed, we shall see.  I most likely will re sell it  depending on what it is .
 it would be awesome if it were a sas then I could fix the trigger  and would of grabbed a great deal.

[z28rod]

Mike , I saw that WFH it was a great price, but your saying the seller paid $50 bucks to ship it ? Sounds like he had them pack and box it to, they kill you with that. $50 bucks is crazy. You didnt pay $50 did you ? Hek your right for$175 you could have got the refurb. plus dosnt it have a broken trigger ? Well maybe its a easy fix keep your figgers crossed but you still should be able to buy the parts to fix it from umarex. I delt with them on a scope replacement and they were excellent.

[Mike 4888blues]

Mike , I saw that WFH it was a great price, but your saying the seller paid $50 bucks to ship it ? Sounds like he had them pack and box it to, they kill you with that. $50 bucks is crazy. You didnt pay $50 did you ? Hek your right for$175 you could have got the refurb. plus dosnt it have a broken trigger ? Well maybe its a easy fix keep your figgers crossed but you still should be able to buy the parts to fix it from umarex. I delt with them on a scope replacement and they were excellent.

I sent you a reply in your personal messages..
Thanks