Does the 350 spring fit the chinese clones ?

[Nomadic Pirate]

I have this Maccari Ultra Mag spring, I bought it to tune my Super Streak but it turned out to be the wrong size, can't sell it so I'm considering buying a 350 to tune in the future ( make use of the darn spring  )

But with all this,...I think is Melik tuned B28 ? the 350 clones right ?

I'm thinking I should get one of them and have a spare spring for the future,...Am I thinking along the right lines, does that spring fit them guns ?

Thanks

M

[tjk]

Not sure about the spring, but the B28 is the clone of the Diana 350.

[WHITEFANG]

They take the same kits B28/rws 350 in the VORTEK. I would thing Jim's will fit as well. Email Jim and ask. I bet that it will interchange. His Drop in 350 MAG spring is as said: Drops right in and fits the orginal platform. Nice improvement to any 350. Imo it's better to go ahead and spend the money on the front end and get his complete kit with the new guides.

[Nomadic Pirate]

OK now, there's a Melik Tuned B28 .25 on the classified, so I suppose all the internals would have being replaced already, so If down the road the spring breaks or gets old I would have a spare in my hands to just drop in, ...right ?

[VAFarmer]

Nomad. 

Check Mikes site, he had the b28's in .25 listed last week for 189.00 bnib I think.
Don't think the stock springs are that bad.

God bless,

Farmer

[supertech77]

also will fit the ruger air magnum,great air rifle,air guns daily sells them from time to time,for 59.95 refurbished,the best price i have seen,its 99.00 at air gun depot. refurbished,and 156,00 at wal-mart new,,,and as stated the b-28 is a great gun too,

[Mike 4888blues]

I have this Maccari Ultra Mag spring, I bought it to tune my Super Streak but it turned out to be the wrong size, can't sell it so I'm considering buying a 350 to tune in the future ( make use of the darn spring  )

But with all this,...I think is Melik tuned B28 ? the 350 clones right ?

I'm thinking I should get one of them and have a spare spring for the future,...Am I thinking along the right lines, does that spring fit them guns ?

Thanks

M

I am not sure hard to say about the spring you have .

 the best tune kit for the rws is the vortex kits its better then the others and more fps then the others. my suggestion is forget that spring, you can always cut and heat the end flush and smooth the end  with a cut off  wheel n grinder for a tune  project. BUT

 You can get a genuine RWS now for around 350.00 plus shipping. I had the xisico b 28 nice rifle  but then sent it back to mike, and bought the real deal... and "Believe me it was worth the extra money i spent and wasted on the money i lost from 1. shipping it back to mike and 2 mikes policy of returns cost me as well.
 and you know what after i received my RWS 350 .22 i did not care  that rifle is gorgeous so dam  insanely accurate  mine was used and some one  tuned it with voortex kit , Believe me  it cocks almost  like my diana 34 .22   now and is smooth as butter. I could not believe  it at first
It cost me more money  trying to save money lol

I could of just bought one for the full cost for all the money i lost but again *(&^ once that RWS is in your hand you are not letting go of her never lol
 the b 28 was a nice gun but your going to want mike to tune it so now you could of taken that and saved a tad more to get the  real deal  once you have the RWS 350. you will never look back

[thekid]

I think the ultra mag spring is for the hatsan models like ... walther talon, hatsan 125, turkish guns.

I have the pro mag spring for the 350 magnum... if it is the pro mag pre set spring, yes it will fit in the rws 350 and clones.
I have used the spring from the hatsan 125 for the 34 .22... sure I had to cut it but it gave me 18 fpe from the gun which usually maxes out at 16.
SOOO I guess it would fit, should make a wee shooter out of a 350 or clone.
Hopes this helps.
Rob

[DMikeM]

The spring should work in the B28, R.A.M. and the RWS 350. I have 3 of the clones for less than the price of one RWS 350. All have been modified by me and tuned with the Vortek (Not Vortex like the scopes) Kits. My .177 with the soft tuned Vortek Kit cocks like a RWS 34 and shoots CPL 7.9s at 980 FPS dead accurate at 35 yards consistency.

[fperez0209]

I own a B-28 in .25 tuned and don't really see a reason to buy an RWS 350.I'm very happy with the shooting characteristics of this gun.Not everyone is cut out to shoot a powerful springer.

[path]

airguns of arzonia has rws 350 in .177 for $198 if thats worth anything.

[Onebaddj]

Depending on which cal you want the aoa and mike melick tuned guns are great deals. Not sure about the spring though. If its just the length, springs are easy to cut and redo the ends.