Beman P-1..parts

[airgunbuff]

Hey Guys I have a old Beeman San Rafael P-1 in 177 cal and need to rebuild it.  I know my friend J.M has springs but that leaves me needing a breech seal and a piston seal...I will go with OEM parts if i have too...But I much prefer aftermarket parts if possible...
Does anyone know of a good parts sours for this nice German springer pistols
Thanks in advance
kindly
Ron

[Davee1]

Dont know of any aftermarket piston/breech seals...I use T.W. Chambers & Co.
I bought a few P1 piston seals from Chambers.
The breech seal you can use a #009 oring, and I have a note here that says I used a #010 oring for the breech seal also.
Below is the link to the piston seal, part # PW088...on page 6 scroll down on the page to see the PW088 order button.

http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24564&cat=HW45

P.S.  I've bought from Chambers ten times now in the past few years, and the parts have always gotten to me within 7~10 days.
Dont be afraid to use them.  They are awesome!!!

[airgunbuff]

Many thanks for responding..a big help
kindly
ron

[southpaw]

Do these seals also fit the P-2 ?

[VAFarmer]

I put a McCarri spring in my P-1 ---only advice on this is ---DONT forget to have them preset it!!!!

Bought my seal at Pyramyd.   Yes.  And they had two different types of seal, IIRC.  Know your vintage.
Throw the seal in on top of a buy 3 get one free order of Predators, and you really come out like a bandit.

God bless,

Farmer