Thanks for the add!

[BruceJ]

Thanks for adding me to the forum. I'm twice retired as of Sept 2024; U.S. Marine(1981-2001) and Calibrator/Engineering Tech/Metrology Engineer for the past 20 years. Through the years I've been busy with woodworking and auto repair/rebuilding. I'm just starting this as my first post retirement hobby.  Starting out with a Gamo Swarm Magnum 10x gen3i. Not really interested in hunting, just plan on plinking in my backyard and running off the occasional varmint. I am curious if there is any advantage to replacing the CAT trigger blade with the GRT-4G trigger. I've read the CharlieDaTuna writeup on the GAMO trigger assy and am curious if this is the common consensus extending into the GEN3i breakbarrels. I already plan to replace the CAT adj trigger screw with a M2.5x10mm allen head.

Thanks again,
Bruce Melcher

[Rocker1]

Welcome to the GTA.. David

[dk1677]

Welcome to the GTA Bruce!

[Back_Roads]

 Bruce welcome to the GTA! I am sure someone in the GAMO Gate can provide the answer, https://www.gatewaytoairguns.org/GTA/index.php?board=284

[longislandhunter]

Welcome Bruce, nice to have you with us.  I'll be looking forward to  your future posts.  Thank you for  your service. 

Jeff

[AThomas]

Welcome to the GTA!

[mr007s]

HOWDY, WELCOME, HAVE FUN, AND  "Follow the Yellow Brick Road”