Author Topic: Barra 250Z stock.. (Read 287 times))

cosmic · « **on:** April 11, 2025, 07:59:59 PM »

Well I just received my 250Z.. Problem I can't unlock the stock to adjust it.. Any ideas ?

wendy · « **Reply #1 on:** April 12, 2025, 10:18:56 PM »

Go to YouTube and watch the video on the disassembly of the Barra.

cosmic · « **Reply #2 on:** April 17, 2025, 08:58:48 AM »

The video did not have anything on it so I pulled the pins and adjusted to my desired length... I was in touch with Barra and they were helpful..

PumaCarl · « **Reply #3 on:** April 19, 2025, 05:37:44 PM »

I had the same problem with mine and I had to pull the pins, which were bent, straighten them, and take down the pin that holds the stock where set to, about an 1/8". I used cylinder hones on the stock to open it up a little.

All the work I did, including mounting an arca swiss plate, was worth it, This gun shoots lights out.

Thank you to our advertisers!

Barra 250Z stock..

Author Topic: Barra 250Z stock.. (Read 287 times))

cosmic

Barra 250Z stock..

wendy

Re: Barra 250Z stock..

cosmic

Re: Barra 250Z stock..

PumaCarl

Re: Barra 250Z stock..