M-rod + Scope question

[Brewerja]

So, i will probably retire my tuned NP XL1100 since i bought my M-rod. I wanted to put my vector 6-24x50mm side wheel focus onto my M-rod but noticed i need a set of dovetail mounts now. Do i use medium or high mounts for this? I was looking on Pyramyd airs site and looked at some of the customer images. The very first pic is some dudes M-rod with a 56mm objective using medium mounts, but i can almost swear that the scope is touching the dang shroud!!??! Does anybody know about 30mm scope mounts for the M-rd with a 50mm bell? If i can get away with a medium mount, and still have the mag clear i would be happier. If not i guess i can still do a high mount. Im looking to keep things as low as possible without any adverse effects.
Here is the photo i was talking about. Thanks guys. 
 

[CitySniper]

50mm Objective ....High Rings, Pyramyd air should have what you need. I have Medium Rings and a 40mm objective

[Brewerja]

thanks citysniper, im ordering right MEOW! lol i cant wait to play with this puppy. 

[.22 Varmint]

   My scope (this one https://www.pyramydair.com/product/centerpoint-power-class-4-16x56-ao-rifle-scope-mil-dot-reticle-1-8-moa?a=1651) with a 59mm objective fit my Mrod with Leapers 30mm, medium height rings. However there was just over a mm of clearance, and the front lens cap would not fit anymore. I moved up to some slightly higher rings. I would not recommend using medium rings. They do fit, but with very little clearance.

Andrew        

[Norm_m]

When I had my MRod I used med high rings and they worked perfectly with my Crosman Power Class 4 - 16 X 56 mm. I had a 1/4" clearance which is perfect

[0351_Vet]

When I had my MRod I used med high rings and they worked perfectly with my Crosman Power Class 4 - 16 X 56 mm. I had a 1/4" clearance which is perfect

Good point Norm...I too am running Med with 56mm....Justin, Just buy both and send (Or keep) the other set. Rings are cheap. SF