.20 caliber IHunter Score 14.3 gr pellets

[Mark 611]

Nice work Wes, test them good and let us know how they turn out!

[Motorhead]

Any chance of CLEARER / CRISPER pictures 

[Ike the GSD]

Any chance of CLEARER / CRISPER pictures 

Sure if you want to buy me a new cell phone 🎂😜

[Nvreloader]

Thanks Wes
If you'll provide some other information, I'll add them to the 20 cal data base,
I need the following info, for the data base.

Outside waist dia,
Outside skirt length,
measured along the skirt angle, to the approx line of where the head and skirt meet,


Inside skirt diameter,
Inside skirt depth, 90* to end of skirt,
inside waist diameter, at the roof jct,
Skirt thickness, same angle as skirt slope,
Bearing length, from the bottom of the skirt to the head driving band,

I'll figure the Outside skirt angle and the inside skirt angle,
then add all this info in the data base, w/credit to you.

If you want to help, I'll buy a 10 rd sample and pay for the shipping,
and do some hardness testing to add to the pellet Hardness testing data bank.

Drop me a PM with your info and I'll contact you.
Thank you for your time and trouble.
Don

[Ike the GSD]

This is a ten shot group from my HW80 at 10 meters using the IHunter 14.34 pellets. While not match grade, in my opinion they produce very useable accuracy. I'm gonna use these for skull crackers on woodchucks and things like that, I don't plan on shooting them exclusively.  I asked the seller if these pellets are actually made in England and I'm waiting on a response from him, when I hear anything I'll post again👍

One thing I'd like to add is those shoot and see targets make that group look a lot bigger than what it is, a dime will easily cover the pellet holes👍

[Mark 611]

Nice shooting Wes