First results with the Pinty .22 Bullpup - 2025-02-25

[GTA-Airgunner]

Hello folks.

So, we went to the range yesterday and spent about six hours filming. We have four videos in the can, one of which was our out-of-the-box first shots and tests with the Pinty Bullpup. 

So first of all... I've settled on our 8 .22 caliber pellets to use for basic testing.

JSB 15.89s
JSB 18.13s
H&N 15s
H&N 18s
CPHP 14.3s
JTS 18.1s
H&N Baracuda Match 21.14s
RWS Superdome 14.5s

We may change some out over time, but at least this is a starting point.  Thoughts??

So we shot our tests and came up with the 15.89s as the go-to pellet for the Pinty so far.  The top left was the first group, and the top sighter was the last group to verify our initial results with the 15.89s.  The gun averaged 870ish FPS with the 15.89s, and the extreme spread was under 10 fps most of the time with a standard deviation of under 2 fps. 

26 - yards

We are just getting started, so be sure to keep an eye out for more details as they become available. Remember, you can get $40 off any Pinty PCP with code GTA. If you use the links here: https://www.gatewaytoairguns.org/GTA/index.php?topic=217783.0, the GTA will receive a small piece of the action at no cost to you.

Ok.. I need to pack up and head back to the range.  We will have some behind-the-scenes videos from yesterday.  So, if you are a Patreon member or an officer's club member, be on the lookout for them!

Thank you all for being part of the GTA!

Cheers
Rick

[splitbeing]

I think I'd take the ftts over the 15s and the baracuda hunters over the 18s since the ftts and hunters seem more popularly posted about than the 15 or 18 baracudas (in pcp shooting).

Here we go! Lookin forward to the videos!

Not a big surprise on the 15.89s. Guessing the reg and hammer are stock settings? Seems like it was set up for 15s.89s at those speeds.