P-Rifle on the way

[billygee]

Pic from billygee

Referencing back to post #178, where I started this Mod to Get the Bark Out of my P-Carbine to present

This can be for DIY by purchasing some tin wall aluminum tubing, tube of JB weld, and a Beeman Underlever Suppressor Kit, which allows two selective UNI suppressors

OR for fastest and easiest : the 18mm collet suppressor using the original shroud , both are from Buck Rail (Barrel Band Pending)

All will take the Bark Out from this P-Carbine, as my Mod did Exceptionally Well compared to my Fortitude db
with out having a db meter I can only say db comes close maybe quieter then a RED Ryder BB Gun'

Bill

[Papa T]

Not tested on rifle yet, but here are the variations for new barrel band. One with, and one without, pic rails.

[splitbeing]

Hello bands! Good to see you!

[Papa T]

Tried the bands out tonight, did b-e-a-u-tiful. And looks good too. Decided to stick with the picatinny version for now, and giving it some glam up.

Center group was control group before bands, top left was straight band (no picatinny), and top right was picatinny band. Pulled at least one shot early, and found I'm not at all practiced/steady with bipod. 🫣

[Nukall856]

 Pinty Rifle .22

 This PCP Air rifle was ordered through Ama zon dotcom through the vendor Pinty Direct. 10 % off along with shipping cost was $220.

  Today I received the P-Rifle in a nice box with full styrofoam protection. The airtube was empty when received. Included were 2 of ten shot magazines and a baggy of different O-Rings and a small container of sealing oil. I didn't see a Single Shot tray, I would have loved one even if it is a Side Lever.
  Handling it feels very nice I very much like the shape of the stock. Sitting Right under 38" OAL   this makes for a fast handling AG.
  The side lever action is very smooth and has a Flow through Bolt, very nice. The trigger is short and very light. The trigger does not appear to be adjustable. The Air gauge at the front of the Air tube is numbered in Bar with a 250 bar limit. The Gauge has a glow in the dark face after exposing the gauge to bright light.

Using a new 4 stage Hand pump from Amazon I Filled full to 250 bar. I lost count while pumping. For the first few pumps the air was passing the valve into the barrel. Using a quick pumping action a few times was enough to close the valve to take air. The hand pump said 3000 PSI by the time the 250 bar limit was reached. I don't speak bar so I watched the PSI gauge to compare to the bar gauge on the P-Rifle.
 Shot report is LOUD. Like loud loud. Im wondering if the 14x1.25 LDC I've seen on BR would fit. I might email BR to see if the LDC will work on the P-Rifle.
 The barrel sleeve test for a barrelband sent by airgunmods dotcom does not fit. I'll need to email him to let him know.

 I removed a Pinty 3-9x32mm AOEG scope from the Crosman Bottlegun and mounted onto the P-Rifle using a Dove-pic rail and medium height rings. I Took shots at 35 yards to get close to sight in and shot a few pellets through the chrono.

 Hammer Spring adjustment backed out All the way

250 bar start

APT 18.0gr
830-840 FPS
27.7 FPE

20 shots later it looks to have around 2000 PSI left.

I will have to setup my other chrono before I can get a full shot string together.
Fun, loud, regulated fun.


NVak

[Back_Roads]

 Nukall I have the 18mm Buck Rail over the shroud compression fitting suppressor, it works wonders, simple installation.

[Nukall856]

Back_Roads,
 
 Thanks to you I found that a week or so ago and For a number of days I have been waiting for BR to have the 18mm Collet Suppressor to be in stock. Today I ordered the two 18mm that were available, one for the UX Iconix and the other for the P-Rifle.
 The Pinty 3-9x32mm AOEG has short eye relief though provides a clear view and also has illuminated reticle with hash marks for judging distance or drop at further ranges. I'm thinking to order a Pinty 4-16x40mm AOL for this Airgun.
  At a later time I'll be testing other pellets. The shot report is loud that I can't be shooting in the backyard. I have to go under the hill or to the tundra to be shooting some of the loud unmoderated air rifles I have.

NVak

[Back_Roads]

 Good deal I did some 50 yard plinking after work with my P-Carbine with the Buch Rail doohickey thingy