Pinty Tactical Airgun.

[Blowpipe Sam]

Bill.

Venomous snakes were put on this earth to be targets for AIRGUNS! 

+1 on the disc as a backstop/target.  I’ve got two hanging on posts.  Set concave face toward you they will deposit lead  in an area 10’X10’ in front.  Lay a big tarp on the ground before a shooting session and you can recover 75% easy!

[avator]

Bill.

Venomous snakes were put on this earth to be targets for AIRGUNS! 

+1 on the disc as a backstop/target.  I’ve got two hanging on posts.  Set concave face toward you they will deposit lead  in an area 10’X10’ in front.  Lay a big tarp on the ground before a shooting session and you can recover 75% easy!

No way... I'm hoping the snakes will eat them and get lead poisoning.
Yeah, I don't have a problem returning lead to the earth from where it came. 
I have an unlimited supply of wheel weight lead to make more.

[avator]

I mustered the courage and opened that back gate so I could ride the Rancher atv out through the swamp to hang the disc on the backstop. I was pleased that no snakes joined the party and I made it back without the need for rescue.
Only problem is that I forgot to put a fresh coat of white paint on the disc so strikes could be easily seen through the scope. I'll want to take another run at it.
But yeah, it gives of a nice "RING" when hit.
I'll learn alot about hold over with this.

[Robert 5mm]

I have had a tin of these around here for 5 + years... I picked them up at a second hand joint or someplace for a couple bucks. I've never had a gun that shot them well... until now.. 
They are deadly accurate within my 45yd range in my P-Force straight from the tin... no sizing needed.
These little gems are almost too pretty to shoot. 

I have had a tin of H&N Rabbit II - lead not copper coated - for a long time.

Oversize - cannot get them into breech even with the round end of a pellet probe.
That is why I still have a full tin of them - could not fit into any .22 without a lot of work.
( they are labelled 5.5 on back of tin )

[avator]

I have had a tin of these around here for 5 + years... I picked them up at a second hand joint or someplace for a couple bucks. I've never had a gun that shot them well... until now.. 
They are deadly accurate within my 45yd range in my P-Force straight from the tin... no sizing needed.
These little gems are almost too pretty to shoot. 

I have had a tin of H&N Rabbit II - lead not copper coated - for a long time.

Oversize - cannot get them into breech even with the round end of a pellet probe.
That is why I still have a full tin of them - could not fit into any .22 without a lot of work.
( they are labelled 5.5 on back of tin )

I would be interested in them if you would be willing to part with them.

[bduares]

I'll learn alot about hold over with this.

You would have laughed yourself silly if you had seen me trying for a 650 ft shot with an Umarex Origin. Holdover? 7 feet!

[avator]

I'll learn alot about hold over with this.

You would have laughed yourself silly if you had seen me trying for a 650 ft shot with an Umarex Origin. Holdover? 7 feet!

As far as I can tell I have a 4" drop with the 28 gr slug. I can hold 3 mil over and hit a 1 1/2" group. But that's with a pretty good cross wind today.

[smythsg]

Bill, I also have a tin of the Rabbit Magnum ll lead pellets I've had for a long time and only shot a couple for testing. They can be yours if you want them, happy to pass them along to someone that can use them...

[Back_Roads]

 I did some slug testing today, I had to stop and do other things so I may have not have been on my
B- game today
 Bottom row is Norma 17.6 as a standard, middle ish 2 are my cast cup point not sure what up, they may be mixed alloys or what not, I cast new ones for next round of testing.
 10m I expect better me and the ammo LOL
 Top row Pile Driver, next Rabbit magnum, Cup Point,x2, BBT and Norma.

[avator]

Bill, I also have a tin of the Rabbit Magnum ll lead pellets I've had for a long time and only shot a couple for testing. They can be yours if you want them, happy to pass them along to someone that can use them...

Do you not have a Pinty P-Force to try them in?

[smythsg]

Bill I have the Pinty Bullpup, not the P-Force. I have owned several Airforce guns in the past and currently have an Airforce Escape UL so didn't need the P-Force. I recently put the .25 cal barrel back in my Escape UL and will not be shooting anything as heavy as the Rabbit Magnums in my Pinty Pup which is my only .22 cal now.

[Back_Roads]

 
 OK I must have regrouped, here are my results after some food and chill time. I did some casting enough of both bbt and cup point to get back in the grove. I did give myself a few redo's as I knew I pulled the shot.

 Top to bottom Pile Driver, Eujin, H&N 21gr slug, Rabbit magnum II, BRB 34 gr cup point, BRB BBT 30gr.

Before 
 Here are the speeds I do have I will add to it but some are fairly close POI was the same in their weight catagory.
Pile Drivers 600 fps 30gr

Eujin Point 673 fps ?gr

Rabbit Mag II 675 fps gr?

BBT   633 30gr

[avator]

Did you do any turret adjusting for the different pellets? Mine takes a bit of adjustment for different ammo. A few are the same and a few require a few clicks one way of the other.

[avator]

Pinty has adopted the P-Force moniker...

check it out..

https://pintydevices.com/pages/pinty-pcp-air-rifles

Be sure to scroll down to the rifle specs and notice the names.

[Robert 5mm]

Maybe we ( GTA ) gave them the name.

I used it in the review - see attached screen print of my review.

[avator]

Maybe so but others are claiming the glory as well.

But there may be issues... Google P-Force... the brand name may already be in use.  AirSoft related.

[Back_Roads]

 Or some big pharma product LOL

[avator]

Or some big pharma product LOL

LOL.. yeah, and there is that. 

[avator]

Bill, I also have a tin of the Rabbit Magnum ll lead pellets I've had for a long time and only shot a couple for testing. They can be yours if you want them, happy to pass them along to someone that can use them...

Follow up...
I received the Rabbit II pellets from Steve (thank you, Sir) and I'm happy to report that they shoot as accurately as any other pellet/slug that I have that shoots from this gun. Even shooting into the wind this morning I was putting them at minute of paintball at my 40 - 45 yd range. I didn't try them at the max 80 yards because I think that would have been bucking too much of the gusty wind today. That equates to consistent head shots on the squirrels that make the mistake of not reading the No Trespassing sign posted around the property.

[Back_Roads]

 Bill when you get a chance let me know what FPS you are getting with Rabbit Mag II's. Thanks!