Author Topic: Pinty Tactical Airgun. (Read 9865 times))

avator · « **Reply #140 on:** February 25, 2025, 10:54:55 PM »

NICE !!
The mold is on the way... thanks James.

Will the bullet slinging P-Force please step to the head of the class?

TroyHammer · « **Reply #141 on:** February 25, 2025, 11:23:44 PM »

Quote from: avator on February 25, 2025, 10:54:55 PM

NICE !!
The mold is on the way... thanks James.

Will the bullet slinging P-Force please step to the head of the class?

Now I need bullets.. lol... with the longer barrel i installed I'm hoping it's a slug shooter. 21" barrel and no choke. We'll see come the weekend when my sear gets here. I swapoed my modified sear with a member for their factory sear. I'll get it profiled and back in on Saturday to start testing.

avator · « **Reply #142 on:** February 26, 2025, 01:55:12 AM »

Quote from: TroyHammer on February 25, 2025, 11:23:44 PM

Quote from: avator on February 25, 2025, 10:54:55 PM
NICE !!
The mold is on the way... thanks James.

Will the bullet slinging P-Force please step to the head of the class?

Now I need bullets.. lol... with the longer barrel i installed I'm hoping it's a slug shooter. 21" barrel and no choke. We'll see come the weekend when my sear gets here. I swapoed my modified sear with a member for their factory sear. I'll get it profiled and back in on Saturday to start testing.

I hope your's does as well as mine with these. I can send you some samples when I get the mold.

avator · « **Reply #143 on:** February 26, 2025, 06:35:33 PM »

Ok, I have a question regarding the sloppy cylinder.

First of all I apologize but I'm not in the shop where the gun is so I borrowed this pic from a previous post to show the area I'm talking about here. If it's confusing I will get a better pic of my gun tomorrow. I think it will be easy to understand with this picture.
In the trough under the cylinder in the area I have circled in red on my gun there is small ramp looking nub. On my gun it aligns the cylinder so it closes without hanging up.
I'm wondering if you folks with the sloppy cylinder and problems with it hanging up have this nub on your guns or is it an added fix later in the run.
Like I said... I don't have the sloppy issues I've seen others post.

Robert 5mm · « **Reply #144 on:** February 26, 2025, 06:41:19 PM »

Bill,
Mine has the nub, and I have the misalignment cocking and closing once in a while, but it is better than it was at first.

avator · « **Reply #145 on:** February 26, 2025, 06:48:07 PM »

Quote from: Robert 5mm on February 26, 2025, 06:41:19 PM

Bill,
Mine has the nub, and I have the misalignment cocking and closing once in a while, but it is better than it was at first.

Robert..
Thank you for the reply. Yeah, I just don't have all that slop I've on other folk's guns. I have to purposely guide my cylinder to make it hang.

TroyHammer · « **Reply #146 on:** February 26, 2025, 09:06:53 PM »

Quote from: avator on February 26, 2025, 06:48:07 PM

Quote from: Robert 5mm on February 26, 2025, 06:41:19 PM
Bill,
Mine has the nub, and I have the misalignment cocking and closing once in a while, but it is better than it was at first.
Robert..
Thank you for the reply. Yeah, I just don't have all that slop I've on other folk's guns. I have to purposely guide my cylinder to make it hang.

My barrel measured .305" and the AF equivalent is .3125" when I added a factory AF barrel there was absolutely zero slop. I think it's just the barrels we're cut too small.

Back_Roads · « **Reply #147 on:** February 26, 2025, 10:10:07 PM »

I had a chance to stretch things out to 45 yards today, 17.6 gr Norma off a Trigger Stick bipod standing, I was getting groups under an inch. Tweaked my scope zero, so should be perfect for the next longer range attempts.
I will have to look for a nub

LOL

avator · « **Reply #148 on:** February 27, 2025, 06:07:05 AM »

LOL... I'll get pics today... promise.

Tracking on the mold says Tuesday so I don't have to be so stingy with the BT slugs I have on hand so I'll make an attempt to get some chrono numbers with them today.
Accuracy passed with flying colors.

avator · « **Reply #149 on:** February 27, 2025, 11:10:20 AM »

Sorry for the fuzzy picture but I used an old cell phone I had laying in the shop.
But here is the alignment nub... Just wondering if everybody's gun has it.

avator · « **Reply #150 on:** February 27, 2025, 11:37:00 AM »

I've also been accessorizing a bit..

A slip on cheek pad with loops for vials of ammo.
A pair of MLok rails for legs ect..
A finger activated green laser (this thing can hit a cloud at night)
A LED flash light that zooms to 2000x
And a click on/off red laser.
I also have a holographic Tru Glo red/green dot sight. (not shown)

rkrr20307@comcast.net · « **Reply #151 on:** February 27, 2025, 11:58:36 AM »

@avator-- Sorry I am at work right now and not looking at my P-FORCE but I think and could be wrong but that is not an alignment but that is part of the safety that when the safety is engaged it will stop the cocking lever from rotating to cock. I will double check when I get home.

avator · « **Reply #152 on:** February 27, 2025, 12:03:34 PM »

Quote from: rkrr20307@comcast.net on February 27, 2025, 11:58:36 AM

@avator-- Sorry I am at work right now and not looking at my P-FORCE but I think and could be wrong but that is not an alignment but that is part of the safety that when the safety is engaged it will stop the cocking lever from rotating to cock. I will double check when I get home.

You know, I think you are right.. I didn't realize it moves. I just depressed it.
I guess it helps to put my glasses on.

cosmic · « **Reply #153 on:** February 27, 2025, 04:31:51 PM »

My UTG 3x12x44 just arrived.. Not bad for the price.. Rings fit no problem... As soon as I get my sear from or bother in air Troy, I will slap it together and when the wind is under 20 mph I'll take it to my permission and play... Have some AVS slugs, but they might be to large at .2193.. I also pick up some JTS dead center 16.08 pellets and a tin of the Olympia 25 gr slugs..
Cosmic (Ray)

TroyHammer · « **Reply #154 on:** February 27, 2025, 05:27:16 PM »

Quote from: cosmic on February 27, 2025, 04:31:51 PM

My UTG 3x12x44 just arrived.. Not bad for the price.. Rings fit no problem... As soon as I get my sear from or bother in air Troy, I will slap it together and when the wind is under 20 mph I'll take it to my permission and play... Have some AVS slugs, but they might be to large at .2193.. I also pick up some JTS dead center 16.08 pellets and a tin of the Olympia 25 gr slugs..
Cosmic (Ray)

Just finished the sear. In my rifle it's breaking at 1lb5oz and smooth. I'll run it up to the post office in the next hour.

cosmic · « **Reply #155 on:** February 27, 2025, 06:19:27 PM »

This man is a GREAT asset to air gunning !!! Thanks Troy !!!

Back_Roads · « **Reply #156 on:** February 28, 2025, 10:00:48 PM »

I shot some BBT slugs I cast in tin, IIR they weigh 21 gr. I will do a follow-up tomorrow, over crony etc. seemed to be going about where I aimed in a 35 mph crosswind lol.

avator · « **Reply #157 on:** February 28, 2025, 11:00:55 PM »

Quote from: Back_Roads on February 28, 2025, 10:00:48 PM

I shot some BBT slugs I cast in tin, IIR they weigh 21 gr. I will do a follow-up tomorrow, over crony etc. seemed to be going about where I aimed in a 35 mph crosswind lol.

The new to me BBT mold has an eta of Tuesday but tracking has it in Montgomery as of 2:00pm today. That's usually where UPS put stuff on the local truck for delivery. It might arrive as early as tomorrow.

avator · « **Reply #158 on:** February 28, 2025, 11:35:45 PM »

Just received an update from UPS. The original plan was to transfer it to USPS for delivery one Tuesday. They now say that UPS will be in the area and deliver it themselves on Monday.

avator · « **Reply #159 on:** February 28, 2025, 11:44:47 PM »

These are the slugs I plan to shoot with My P-Force so these are the slugs I want to get the chrono numbers with and do any tuning accordingly. So far I have only been shooting this gun with these same BBT that I had on hand. I've probably shot 150 or so and the gun is deadly accurate with them out to 45 ish yards. I want to be sure I'm getting the same weight and accuracy out of this mold.
I've become very comfortable with the trigger and, as of now, don't plan to make any changes.

Thank you to our advertisers!

Pinty Tactical Airgun.

Author Topic: Pinty Tactical Airgun. (Read 9865 times))