I agree John, the HS adjustment didn"t do much on my Pup either.
Quote from: Xraycer on March 17, 2025, 07:54:11 AMQuote from: Xraycer on March 14, 2025, 12:07:45 PMPerhaps, the Monstrum vendors are actually shooters and already know these facts, and are including these fitting info to keep it simple for the buyers. So perhaps when they mention compatibility with both pic and weaver, they are in actually saying that the mounts will clamp down to 19mm.I got my Amazon order yesterday, and the Monstrum weaver specified scope mount does not fully fasten onto the P-pup's rail. However, along with that order, there was a scope I wanted to try out. It just happens to be a Pinty scope, and it included tall mounts. These mounts fastens snugly onto the P-pup's rail!So, my initial disappointment was complete turned around because this is a fantastic budget scope! Lightweight, good clarity, side focus, and, so far, accurate. I only wished the reticle had mil dots, but I can live with the duplex reticle. With the gun shooting well over 800fps, the 15.89g Hades was hitting targets from 15yd to 55yd with very little holdover/holdunder. The glass clarity is on par with my Hawke Vantage, the side focus is smooth and not overly tight, and about 3" of eye relief. It's still early, but I gotta say that this is the best budget scope($60) I own, and I own quite a few.https://a.co/d/50e5XpADinh... does that scope really weigh 2.1 pounds?
Quote from: Xraycer on March 14, 2025, 12:07:45 PMPerhaps, the Monstrum vendors are actually shooters and already know these facts, and are including these fitting info to keep it simple for the buyers. So perhaps when they mention compatibility with both pic and weaver, they are in actually saying that the mounts will clamp down to 19mm.I got my Amazon order yesterday, and the Monstrum weaver specified scope mount does not fully fasten onto the P-pup's rail. However, along with that order, there was a scope I wanted to try out. It just happens to be a Pinty scope, and it included tall mounts. These mounts fastens snugly onto the P-pup's rail!So, my initial disappointment was complete turned around because this is a fantastic budget scope! Lightweight, good clarity, side focus, and, so far, accurate. I only wished the reticle had mil dots, but I can live with the duplex reticle. With the gun shooting well over 800fps, the 15.89g Hades was hitting targets from 15yd to 55yd with very little holdover/holdunder. The glass clarity is on par with my Hawke Vantage, the side focus is smooth and not overly tight, and about 3" of eye relief. It's still early, but I gotta say that this is the best budget scope($60) I own, and I own quite a few.https://a.co/d/50e5XpA
Perhaps, the Monstrum vendors are actually shooters and already know these facts, and are including these fitting info to keep it simple for the buyers. So perhaps when they mention compatibility with both pic and weaver, they are in actually saying that the mounts will clamp down to 19mm.
Quote from: avator on March 17, 2025, 08:38:03 AMQuote from: Xraycer on March 17, 2025, 07:54:11 AMQuote from: Xraycer on March 14, 2025, 12:07:45 PMPerhaps, the Monstrum vendors are actually shooters and already know these facts, and are including these fitting info to keep it simple for the buyers. So perhaps when they mention compatibility with both pic and weaver, they are in actually saying that the mounts will clamp down to 19mm.I got my Amazon order yesterday, and the Monstrum weaver specified scope mount does not fully fasten onto the P-pup's rail. However, along with that order, there was a scope I wanted to try out. It just happens to be a Pinty scope, and it included tall mounts. These mounts fastens snugly onto the P-pup's rail!So, my initial disappointment was complete turned around because this is a fantastic budget scope! Lightweight, good clarity, side focus, and, so far, accurate. I only wished the reticle had mil dots, but I can live with the duplex reticle. With the gun shooting well over 800fps, the 15.89g Hades was hitting targets from 15yd to 55yd with very little holdover/holdunder. The glass clarity is on par with my Hawke Vantage, the side focus is smooth and not overly tight, and about 3" of eye relief. It's still early, but I gotta say that this is the best budget scope($60) I own, and I own quite a few.https://a.co/d/50e5XpADinh... does that scope really weigh 2.1 pounds?No, 1.3lb
Oh ok, I must have looked at the wrong description. Maybe this is boxed shipping weight with rings, allen wrench and packing included.
Quote from: avator on March 17, 2025, 09:36:49 AMOh ok, I must have looked at the wrong description. Maybe this is boxed shipping weight with rings, allen wrench and packing included.Yea. Figuring the rings, scope covers, tool and manual, and a very beefy box would bring it to around 2lb.
Xraycer is the scope tube 25.4 or 30 mm ?
Thank you- think I will order a few for my P-RIFLE P-FORCE AND P-PUP.
i have requested a return label for a replacement pup, or a refund.......its in there hands now
Quote from: rkrr20307@comcast.net on March 17, 2025, 04:50:41 PMXraycer is the scope tube 25.4 or 30 mm ?30mm
Sorry to hear John, hopefully they will take care of it post haste.
Quote from: smythsg on March 17, 2025, 09:32:07 PMSorry to hear John, hopefully they will take care of it post haste.They'll likely give him a refund (or new gun) and then this will be back in stock and some poor sucker will buy it......https://pintydevices.com/products/second-hand-9-pellet-22cal-bullpup-pcp-air-gun-high-power
Quote from: RichH on March 18, 2025, 07:18:10 AMQuote from: smythsg on March 17, 2025, 09:32:07 PMSorry to hear John, hopefully they will take care of it post haste.They'll likely give him a refund (or new gun) and then this will be back in stock and some poor sucker will buy it......https://pintydevices.com/products/second-hand-9-pellet-22cal-bullpup-pcp-air-gun-high-powerNope.....they just told me by email, there sending me a new gun and to keep the old one but provide them with photo's of the groups.
Advertise Here
Share This!