Benjamin Marauder single shot tray?

[Matchstickshooter]

 Do you prefer the mag or a tray?   
  New to this and loading a mag is time consuming...
  I may look for a tray.

[Rick67]

SST for me.

Rifle or pistol?

The Gauntlet one from Umarex was less than a $ when I bought it and fits the MROD.

Works on a PROD too if you sand the bottom 

[bnowlin]

Someone on here 3D prints them on here maybe they will chime in.
Bob

[Matchstickshooter]

 This would be the Mrod.   this ones .25

 What would a 3D one cost??

[bnowlin]

I don't know what he charges and can't remember name.  But is on this board.  There is a company that sells them but we don't talk about them in GTA for past reasons. LOL

[Matchstickshooter]

I don't know what he charges and can't remember name.  But is on this board.  There is a company that sells them but we don't talk about them in GTA for past reasons. LOL

Ok thanks. and I understand the last part! lol

[Wbldon]

Hi,

I have a Marauder in .25 caliber and started using the Mags but then switched to the singleshot tray as it slowed down my shooting which in turn seemed to improve accuracy.  I feel it also helps to reduce the chance of damaging a pellet.

Just on old guys opinion.

Wbldon

[Matchstickshooter]

 Mine only came with one mag, and it's slow to load.
 Tray would be faster.

[SILENT SQUIRREL]

And then there is CARM

https://www.carm-magazines.com/ssl-for-benjamin-umarex-nova-vista-air-rifle.aspx

[CK]

If you know someone with a 3d printer there are several single shot tray designs available for free.  I prefer using the magazines over the shot trays because I have trouble getting my fingers in the space and about half the time have a pellet roll in backwards. And for me, I don't consider loading magazines as double handling pellets because I am only touching the pellets once.

[avator]

Hey Wendell.
Give Troy a call or send him and email at Big Air Precision.

https://www.bigairprecision.com/index.html

If he don't already have one he's always up for making new stuff and I'm sure he'll get you fixed up.

He makes some flip out single shot mags for other guns that are pretty slick. They fit the mag slot in the breech and just flip out to load a pellet. Much easier than fumbling with trying to put a pellet in a normal SST.

[KevinJBrown]

I purchased 4 magazines. I reload all of them at once. Fill the Marauder with air. By the time I shoot all of the pellets, I'm ready for more air. When I select pellets, I have more than 40 pellets in a group so I'm decently efficient doing it this way.

[Struckat]

Easy choice for me. The mag that came with my Mrod will only hold six or so before the tang on the spring lets go. So I bought a tray on fleabay.

Recently some Carm mags arrived along with their swing out single shot loader. I plan to try those this week.

At the bench I always use a tray. Mags are for safaris.

[avator]

I purchased 4 magazines. I reload all of them at once. Fill the Marauder with air. By the time I shoot all of the pellets, I'm ready for more air. When I select pellets, I have more than 40 pellets in a group so I'm decently efficient doing it this way.

Same.. I buy enough mags to supply a full fill on all of my repeater PCP guns. Then I top the gun off and reload the mags. The only issue there is that you can really blow through the lead.   

[Bicycleman]

Because I do almost ALL of my shooting while hunting, more than one magazine is a MUST.
My Marauder .25 is deadly with the factory magazines.  So that is the way I roll.

[louigi600]

I went out of my way to by a couple of extra mags for my Marauder but ever since made the Single Shot Tray the mags have mostly dropped in disuse.
I made it all by hand way before I got a 3d printer (or any of my friends for that matter). I did such a good job that I just don't feel the need to redesign it in cad and 3d print it.

[avator]

I've read about some folks carving a single shot tray out of one of those square pencil erasers. They made them snug enough to hold themselves in. They measure the location and drilled the hole first then cut it half leaving the trough for the pellet. I suppose you could make an sst out of just about anything including wood.

[louigi600]

Sounds pretty much exactly how I mane mine ... but I did not want to use wood because them humidity could be an issue ... I made mine from solid PE.

[Matchstickshooter]

 Thanks everyone for input! 
   

[triggertreat]

Dan (scion19801) has printed a lot of items for me in the past.  This would include a very nice Marauder single shot tray with inserts for different calibers.  You might send him a PM.