. . . and now for our feature presentation Staring Sky and the M18 P-Force.
Quote from: Back_Roads on February 16, 2025, 03:57:14 AM . . . and now for our feature presentation Staring Sky and the M18 P-Force. James seems pets are stealing the shows lately.Been noticing the bolt doing a dance after each shot, have you noticed any air leak from it being so loose ?Bill
Quote from: billygee on February 16, 2025, 12:05:57 PMQuote from: Back_Roads on February 16, 2025, 03:57:14 AM . . . and now for our feature presentation Staring Sky and the M18 P-Force. James seems pets are stealing the shows lately.Been noticing the bolt doing a dance after each shot, have you noticed any air leak from it being so loose ?Bill not yet, heard a recent owner saying their bolt doesn't do it
Quote from: Back_Roads on February 16, 2025, 03:57:14 AM . . . and now for our feature presentation Staring Sky and the M18 P-Force. James seems pets are stealing the shows lately.
Quote from: Back_Roads on February 16, 2025, 12:52:59 PMQuote from: billygee on February 16, 2025, 12:05:57 PMQuote from: Back_Roads on February 16, 2025, 03:57:14 AM . . . and now for our feature presentation Staring Sky and the M18 P-Force. James seems pets are stealing the shows lately.Been noticing the bolt doing a dance after each shot, have you noticed any air leak from it being so loose ?Bill not yet, heard a recent owner saying their bolt doesn't do itBest review your video understand what the bolt is doingmaybe put a tissue around the bolt area see if you show any movement during shootingBill
Yes Scott Sky has earned herself the nick name "Princess" you know if you lived with a Tortie LOL
Hey James does your single shot Pinty engage the safety every time you cock it like an Air Force Talon does?
For those with a P-FORCE you can make the cocking buttery smooth as I did . Very easy to do although all rifles may be slightly different. Remove the barrel assembly and spin barrel in a drill using very fine sand paper on loading side of barrel to smooth it. Barrel from factory has like record grooves in it. After polish smooth put silicone o ring lube on the inside of cocking devise to push the hammer and it does not bind and is smooth. Hope this helps.
Quote from: rkrr20307@comcast.net on February 17, 2025, 05:24:37 PMFor those with a P-FORCE you can make the cocking buttery smooth as I did . Very easy to do although all rifles may be slightly different. Remove the barrel assembly and spin barrel in a drill using very fine sand paper on loading side of barrel to smooth it. Barrel from factory has like record grooves in it. After polish smooth put silicone o ring lube on the inside of cocking devise to push the hammer and it does not bind and is smooth. Hope this helps. I did inspect and lube that assembly, from what I saw mine was not rough but had some mfg debree, that wiped off.
Quote from: Back_Roads on February 17, 2025, 07:23:09 PMQuote from: rkrr20307@comcast.net on February 17, 2025, 05:24:37 PMFor those with a P-FORCE you can make the cocking buttery smooth as I did . Very easy to do although all rifles may be slightly different. Remove the barrel assembly and spin barrel in a drill using very fine sand paper on loading side of barrel to smooth it. Barrel from factory has like record grooves in it. After polish smooth put silicone o ring lube on the inside of cocking devise to push the hammer and it does not bind and is smooth. Hope this helps. I did inspect and lube that assembly, from what I saw mine was not rough but had some mfg debree, that wiped off.James,My P-Force is scheduled to be delivered this Thursday.I have a Air Force Talon SS and removing the barrel is simple.Does the P-Force barrel come out by removing the same four screws ? and then pulls out the front.I plan on removing barrel to clean and inspect first thing.Thanks, Robert
Advertise Here
Share This!