Urban SST

[tennx]

I’m usually on the tail end of most things..so this urban SST probably no exception….as much as I like the rotary mags,I really enjoy single shot….this 3d printed tray works flawless and just thought I would mention it…for those who might not be aware of it…good luck



https://www.ebay.com/itm/186315221894?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qOmshxY4TBa&sssrc=4429486&ssuid=_70jmZuBS5m&var=&widget_ver=artemis&media=COPY

[Airnut]

Ya they have been around for a few years
Now. I printed up a bunch and gave them away for free about a year ago.
My Urban is more accurate with the ss tray for some unknown reason.  Groups tighten up about 1/8" using them.
Here are the ones I print.

[avator]

Ya they have been around for a few years
Now. I printed up a bunch and gave them away for free about a year ago.
My Urban is more accurate with the ss tray for some unknown reason.  Groups tighten up about 1/8" using them.

I just may need to jump on one of these... thanks.

[naptemp]

Ya they have been around for a few years
Now. I printed up a bunch and gave them away for free about a year ago.
My Urban is more accurate with the ss tray for some unknown reason.  Groups tighten up about 1/8" using them.
Here are the ones I print.

Can you share a link to the STL file?

[tennx]

Ya they have been around for a few years
Now. I printed up a bunch and gave them away for free about a year ago.
My Urban is more accurate with the ss tray for some unknown reason.  Groups tighten up about 1/8" using them.
Here are the ones I print.

As I said always the last to know….if u folks dont mention stuff on here I will remain clueless unless I stumble on it….yours is the spitting image of the one I purchased….I did have to pop the magnet out and reverse it…as they wer opposing each other and SST wouldnt stay in…..its a nice design ,the maple notos SST is cool too….


U 3d folks are a great asset to the ag community..👍

[Airnut]

Philip
The magnet issue was a problem when I printed 12 mags. I installed the magnets that worked on my gun. Out of 12 mags that I sent out about five had to be flipped around. I think it depends how the magnet in the gun was oriented when installed at the factory.
That's the only explanation that I can think of why they all worked in my gun but not in all Urbans. Needless to say it was embarrassing.

[Airnut]

John
Go to thingiverse.com and search
For gamo magazine scroll down until you find it.

[Airnut]

Ya they have been around for a few years
Now. I printed up a bunch and gave them away for free about a year ago.
My Urban is more accurate with the ss tray for some unknown reason.  Groups tighten up about 1/8" using them.

I just may need to jump on one of these... thanks.

Bill
Let me see if I have anymore left. If so I can send you one.

[Airnut]

Bill
I got one left.
BUT it's red.
If you want it Pm me your address and we can make it happen.

[avator]

Bill
I got one left.
BUT it's red.
If you want it Pm me your address and we can make it happen.

Thanks... red is fine... maybe I won't lose it... 
PM sent.