15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Filling 6.8 liter bottle from 0-4500psi ,2 hours and 40 minutes
Ain't those things supposed to be ran on run - cool down sessions? Maybe a 20/20 or something like that?
I have wanted a compressor for years. I finally bought a GX CS4 compressor. I put distilled water, about 7 fluid ounces, turned it on to let water circulate, then 5 more for a total of 12 fluid ounces.I connected the fill whip to my 80 cubic foot scuba tank. It had about 2400 psi.I opened the bleed valve and started the compressor. After 15 or 20 seconds I closed the bleed valve. It isn't that noisy, but it whizzes like a star wars fazer slowed down. It also has a rhythmic thud, and a metalic clanking sound.I was expecting it to purr like a kitten. It really doesn't sound very refined to me.I let it run to see if it was going to fail. It ran about 1 hour and 15 minutes to top up my scuba tank. Does that sound right?If you have aGX CS4 let me know if yours makes these noises, and if it should take over an hour to top up a scuba tank.ThanksHunter
Thanks BillI finally found his post on AGN about the CS4, my search dog is OLD......and tired.And I have a question on it, I notice that there are 4 feet on the one side of this compressor,Does that mean it can operate lying flat and or upright?From all the photo's shown, I don't think so...So far I have not found any info on this aspect, of operation. I'll have a email to CS with this info when they are back on line from their vacation.Tia,