Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?

[OTmachine]

Hello All,
Can anybody measure and post these sizes for me?  My cousin has a 362 that I would like to 3D print a Picatinny Rail and Moderator for.  I have some 1322 files that I believe that I can adjust, but need actual sizes.  I do not have the rifle in hand and his digital caliper is fluctuating a Lot.  I would like to have them ready to install next week when he stops by. 
TIA,   Keith

[Mzq284]

If someone doesn't get you the dimensions before I get home from work  tonight I'll measure them for you. I don't get home till 12:30- 1:00am, so you might not want sit, watching for my reply!

[Psipumper]

I measured a couple 362’s .
Barrels: .437 and  .4372
Tube O.D. : .7525 and .753

[OTmachine]

Thank you for the measurements!  Looks to be the same as a 1377 that I have as long the barrel to tube gap is the same.  I found a Crosman 1377 Picatinny rail on Thingiverse that looks like it will work.  Just going to stretch the Z axis 175% to make it 4 inches long.

[chuckinohio]

I measured a couple 362’s .
Barrels: .437 and  .4372
Tube O.D. : .7525 and .753

  Same here
 .437
 .752

[OTmachine]

Thanks guys!  I appreciate it.   This is my first run at 3 1/2 inches long, PET G @240, build table at 80, 1.5 layers

[OTmachine]

Ended up with these which worked our great after some honing of the rail bore.