Brass trigger guards for HW springers

[Ike the GSD]

 I found these on ebay and I thought they were cool albeit a little gaudy LOL 

https://i.ebayimg.com/images/g/0WcAAOSwGUNfVUcD/s-l1600.webp

[Ike the GSD]

I tried to copy the sellers link but it took up almost an entire page so I just posted the picture instead sorry guys.  I noticed a flaw in the trigger guards, there is no hole for the trigger adjustment screw?

[SpiralGroove]

Hey GSD,
It would be nice if someone just made a blued, steel trigger guard ...... I mean -> the (gold) brass is nice, but just doesn't fit the gun's looks .
We need to be somewhat color coordinated .

[KWK]

Hey GSD,
It would be nice if someone just made a blued, steel trigger guard ...... I mean -> the (gold) brass is nice, but just doesn't fit the gun's looks .
We need to be somewhat color coordinated .

Milled steel guards were offered by Beeman at one time. I ordered one at the local Beeman dealer but they never got it in.
Polished brass accessories are relatively easy to make but I don't particularly care for it so I don't make any. All those brass parts turn green anyway and must be kept polished.

[Jason_Garvin]

I noticed awhile back Rowan has one in black anodized,

https://www.rowanengineering.com/products8.htm#hwbrassguard

Jason

[SpiralGroove]

Rowan makes nice ones ..... but they cost roughly $82+ .
I'm not looking for extra bling so they're over the top ...... ornate for me.

[Deerstalker]

FWIW, Gold & silver triggers for reference.  Both with factory guards.

[Kragman1]

Slightly off topic - how much interest would there be in stainless steel adjustment screws for the Rekords?  Like these:

[SpiralGroove]

Slightly off topic - how much interest would there be in stainless steel adjustment screws for the Rekords?  Like these:

I'd try one, but what difference does SS make besides not stripping out from a flat screwdriver?

Another words .... not really that important - right?

I know they can get buggered, but that's it - right?

[Kragman1]

Well, here is the one I replaced.
I like the stainless one better.

[Yogi]

I thought the appeal was the silver color?  Yes you can bugger the threads in the OEM one.  But they will still work...
FWIW-I like brass/yellow trigger blades.

-Y

[Ike the GSD]

Hey GSD,
It would be nice if someone just made a blued, steel trigger guard ...... I mean -> the (gold) brass is nice, but just doesn't fit the gun's looks .
We need to be somewhat color coordinated .

You know after looking at Deerstalkers pictures I agree with you that a brass trigger guard would be a little to much gold in one place, I think a blued steel version of the factory trigger guard would be great, I just posted the brass trigger guards because I wandered into them while looking at Bisley sling swivel mounts for my R9. What I think would be really cool is color case hardened sling swivels and a color case hardened trigger guard, but that finish requires a lot of care. Turnbull and a few others apply a laquer coating over the case hardened parts they do, but I find it unattractive. If I could get the case hardened parts I'd have to get a walnut stock and fit a rust blued checkered steel semi crescent butt plate to it. A man can dream can't he 😜👍 LOL!

[KWK]

I've made the screws. Pretty simple. Here is a Rowan duplicate and a slightly longer one. The Rowan was badly buggered. Was poorly designed in the first place IMO. I made a print to duplicate the Rowans, MY WAY. But doubt I'll do it again because I have long hands and don't need setback triggers.

[Duckfish]

Factory trigger guards are available at chambers air gun spares

Don't you know

[Ike the GSD]

Factory trigger guards are available at chambers air gun spares

Don't you know

I didn't post this thread as a source for broken trigger gaurds, I posted these as an after market option to gussy up our rifles👍