Umarex Notos CRK Review

[jemkewl]

Appreciate all the help!

As promised - reporting back.

Bottom to top like others. Applied some dielectric grease to the additional o-rings on the new insert.

The Notos was very quiet stock, but now it is "dang" near silent. The hammer is too loud 

[miksatx]

My Notos in play.

[naptemp]

My Notos in play.

Is the orange part a single shot tray?
If yes, where did you find the STL file?

[miksatx]

My Notos in play.

Is the orange part a single shot tray?
If yes, where did you find the STL file?

Ss tray bought 4thlab@ eBay.

[miksatx]

So anyone hazard to guess how to turn the reg down? Looks really close to a pp750.

[x3baddad]

I just saw a vid earlier today and now can't find it ,but the jist was drain bottle unscrews by hand need bent needle nose to unscrew the reg from tube lots of threads and two orings has a screw and nut on end of reg loosen nut a little then he said he was turning it up he turned it 1/4 turn ccw retighten nut lube orings and put it back together.

[x3baddad]

Well just found the YT link for reg adjustment

[miksatx]

Well just found the YT link for reg adjustment

Thanks x3baddad! That’s pretty darn easy.

[kbstingwing]

Those knurled pins on the moderator aren't the easiest to knock out with a punch and hammer, I wound up using my Drill press with the punch placed in the drill chuck, and pressing the pins out and reinserting them when I was done, much easier, I'm gonna leave the stock baffle in, it's more than quiet enough for me.

[tennx]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

[miksatx]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

Using a Athlon talos 3x12x40 on mine.

[Firewalker]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

Have you tried the 3X12 Bugbuster? Very nice on the Notos

[tennx]

I dont have a Bug buster in my stash….I really like this little reflex (have 3)and since I just shoot paper and cans its good to 30yard…I sat it on top of a PA riser…I thought the open riser lent itself to the Notos…my tallest rings still make for a neck ache,,(old neck)without using riser …

I will check my other guns to see if I can do a swap when/if I get tired of the Reflex…or buy whats recommended….good luck



Wish my 1358 was this light..lol

Good Read, and I been thinking scoutmouting an edge…
https://hardairmagazine.com/buyers-guides/umarex-notos-scope-mounting-scout-rifle-style/

[2A Georgia]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

I had to remove the Vortex Venom RD and my "don't judge me" SvBony $19 4x32 is on there now but I think 6-10X is my sweet spot....

[Rick67]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

I had to remove the Vortex Venom RD and my "don't judge me" SvBony $19 4x32 is on there now but I think 6-10X is my sweet spot....

I can do pellet on pellet comfortably at 6x out to 25 yards for as long as the reticle is very thin (Leupold or Clearidge fine) or with a floating center dot (SWFA's MOA-Quad).

I prefer SWFA's MOA-Quad  reticle over their Mil-Quad one.

They're not the clearest though, and I did sell 2 of mine for they both were fixed 20x  Just too much and with a terrible eyebox.

I'd probably get their 10x or even their 6x next time 👍

[2A Georgia]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

I had to remove the Vortex Venom RD and my "don't judge me" SvBony $19 4x32 is on there now but I think 6-10X is my sweet spot....

I can do pellet on pellet comfortably at 6x out to 25 yards for as long as the reticle is very thin (Leupold or Clearidge fine) or with a floating center dot (SWFA's MOA-Quad).

I prefer SWFA's MOA-Quad  reticle over their Mil-Quad one.

They're not the clearest though, and I did sell 2 of mine for they both were fixed 20x  Just too much and with a terrible eyebox.

I'd probably get their 10x or even their 6x next time 👍

As clumsy neanderthal as I am I'd be afraid to take a Leupold into the woods..lol.
My CP3-9X32 on the jumper lives at 6X, I just need to click over to 7X to see the holes in the paper.
The Accushot on the AEA30 has not moved from 9X.  I just turn the sidewheel until I can see.

[Rick67]

I really like the fact the gun is light….but Im having a heck of a time choosing what optics to go with..my best scopes are too heavy for the gun (IMHO) and my lightest are too cheap optically….at the moment Im waiting on a reflex and picatinny riser to try….the BSA RD is adequate for short range and indoors….but out doors I got 30 yards….good luck

I got a 1976 Japanese Tasco 4x32 thats as new and clear optically…may put it on there…lol

I had to remove the Vortex Venom RD and my "don't judge me" SvBony $19 4x32 is on there now but I think 6-10X is my sweet spot....

I can do pellet on pellet comfortably at 6x out to 25 yards for as long as the reticle is very thin (Leupold or Clearidge fine) or with a floating center dot (SWFA's MOA-Quad).

I prefer SWFA's MOA-Quad  reticle over their Mil-Quad one.

They're not the clearest though, and I did sell 2 of mine for they both were fixed 20x  Just too much and with a terrible eyebox.

I'd probably get their 10x or even their 6x next time 👍

As clumsy neanderthal as I am I'd be afraid to take a Leupold into the woods..lol.
My CP3-9X32 on the jumper lives at 6X, I just need to click over to 7X to see the holes in the paper.
The Accushot on the AEA30 has not moved from 9X.  I just turn the sidewheel until I can see.

Lol, I baby my stuff and don't hunt.

Used to when I was still in Asia------ hunt and compete, that is.

[Back_Roads]

 Center point offered a nice 6x AO scope with the Benjamin Maximus Hunter, if one can find that scope used or new get one.  I have not been able to find them sold separately anywhere, and such a nice light weight scope and nice mag. setting for most airgun ranges.

[tennx]

 Well the edge fits nicely on there  as scout mount……gun still feels light to handle…riser and medium quick release rings work well…but at the moment gonna keep the reflex on it…but nice to know I got backup in my stash……good luck…

[kbstingwing]

Well now that I have convinced myself to print out a new Moderator Baffle, I'm having nothing but trouble with my Printer, it's being finnicky, first it won't dispense PLA, clogged print orifice and heater tube, cleaned, working, now the control knob won't go to the right setting, keeps jumping around, cleaned potentiometer, ok, works, set to print object, PLA not sticking to base, cleaned base, still not sticking, adjusted base height, still not sticking, raised base temp to 65 C, ok, now sticking, start printing, ok, man, my printer is so much a pain in the you know what, but it's my fault for not using it as much and maintaining it as good....

ok Notos long Baffle printing.... 10+ hours