Author Topic: Hatsan Jet 3... WTH??? (Read 6092 times))

Rat Sniper (AKA: PaulT58) · « **on:** March 02, 2023, 02:48:41 PM »

Just saw this... Looks like Hatsan is coming out with a Jet 3! It appears to have a built in Moderator like the Notos and now comes with a bottom Picatinny Rail! Gotta wonder if it's also regulated!

A quick Google search came back with nothing, so the details may not get released until after the Nuremberg show.

null · « **Reply #1 on:** March 02, 2023, 06:08:56 PM »

Too bad it doesn't have a foldable stock.

Spacebus · « **Reply #2 on:** March 02, 2023, 06:11:46 PM »

More products is always better! Interested to see if there are other changes besides the moderator and bottom pic rail, plus it being based on the Jet II two tube setup.

triggerfest · « **Reply #3 on:** March 02, 2023, 06:45:22 PM »

I just started to visualize on how the Hatsan Jet 5 will starts to look like....

ranchibi · « **Reply #4 on:** March 02, 2023, 06:46:57 PM »

Paul! Hatsan is taunting us! 😂👍

Rat Sniper (AKA: PaulT58) · « **Reply #5 on:** March 02, 2023, 08:23:52 PM »

The more I have thought about it, the more I like the fact the 1 & 2 don't have a permenantly attached moderator. Past experience with Hatsan's QE suppression system leaves one wanting more, thus the availability of ½-20UNF adapters that screw into the end of the QE Shroud! In the case of the 1 & 2, I can quickly remove the stock and moderator and slip it into a backpack!

I also discovered the Jet 1 & 2 do have an adjustable trigger, but you do have to remove the pistol grip/trigger guard to access it! I quick adjustment took out a lot travel and improved the trigger quite a bit! Next job will be polishing the hammer, all the contact point on the trigger assembly and possibly replacing a couple springs with lighter ones!

bplvr · « **Reply #6 on:** April 12, 2023, 10:59:58 PM »

How do u remove the pistol grip / trigger guard ?

PikeP · « **Reply #7 on:** April 12, 2023, 11:33:06 PM »

Sad to see so much product rushed to market personally, more R&D for a complete product is desirable. I remember 7~ years ago when pcp's were slim pickens, now you get 3 jets released within 1 year, 4 fx impact revisions per year, and $3,000 9mm edgun l2's that are such an up-sell to a dwindling market that requires its remaining addicts to keep opening their wallets to feel relevant.

There are not that many innovations in pcp's short of some of the valve tech from balanced valves to hammerless pilot valves, every other iteration of a rifle (v2 ect) seems like a money grab at this point, call it planned obsolescence, or what have you...but a newly released product should have a longer life than a year or two before its obsolete and so soon are its product support/spare parts...

avator · « **Reply #8 on:** April 13, 2023, 07:53:38 AM »

Another good reason to let the dust settle before jumping in on these new guns hitting the market. Let someone else take the initial shoulda, coulda, woulda hit in the mouth.

Rat Sniper (AKA: PaulT58) · « **Reply #9 on:** April 13, 2023, 08:21:21 AM »

Quote from: bplvr on April 12, 2023, 10:59:58 PM

How do u remove the pistol grip / trigger guard ?

It just snaps on and off, no tools required, but it's a good solid fit.

kbstingwing · « **Reply #10 on:** April 13, 2023, 12:03:59 PM »

I got a feeling this is going to be like the Rocky movie franchise......

bplvr · « **Reply #11 on:** April 14, 2023, 03:38:51 PM »

Quote from: Rat Sniper (AKA: PaulT58) on April 13, 2023, 08:21:21 AM

Quote from: bplvr on April 12, 2023, 10:59:58 PM
How do u remove the pistol grip / trigger guard ?

It just snaps on and off, no tools required, but it's a good solid fit.

That is for the butt stock .

Rat Sniper (AKA: PaulT58) · « **Reply #12 on:** April 14, 2023, 04:23:51 PM »

Quote from: bplvr on April 14, 2023, 03:38:51 PM

Quote from: Rat Sniper (AKA: PaulT58) on April 13, 2023, 08:21:21 AM
Quote from: bplvr on April 12, 2023, 10:59:58 PM
How do u remove the pistol grip / trigger guard ?

It just snaps on and off, no tools required, but it's a good solid fit.

That is for the butt stock .

Oops... Sorry! There are 2 bolts, one at the base of the trigger guard in front of the trigger and the other is inside the grip, you'll have to pop the cover off, but that's easy by just slipping a flat blade screw driver into one side and it should pop right off. The one inside the grip attaches very similar to haw an AR grip is attached to a rifle. If I remember correctly, I believe both are 4mm hex heads.

EdinGa · « **Reply #13 on:** April 25, 2023, 06:13:45 AM »

It's regulated.

Rat Sniper (AKA: PaulT58) · « **Reply #14 on:** April 25, 2023, 09:09:22 AM »

The magazines look larger too... Not a fan of the fixed moderator. Looks like they are directly targeting the Notos!

miksatx · « **Reply #15 on:** April 25, 2023, 12:47:12 PM »

looks to have pins at the muzzle holding on to the front cap.

3crows · « **Reply #16 on:** April 25, 2023, 01:21:19 PM »

Well that is sufficiently fugly and plasticky that I will not be purchasing one. Plastic/composite stocks I often rather like but when the entire rifle is plastic including yet another built in suppressor that is going to get blown out when double stroked, yep, looks like a solid pass for me. The race to the bottom continues unabated.

If these air rifles/pistols keep up with the PB tactical-cool and military AR look they will catch the eye of the law makers.

Spacebus · « **Reply #17 on:** April 25, 2023, 03:50:34 PM »

I don't see it as "tacticool". To me it's "practi-cool"

splitbeing · « **Reply #18 on:** April 25, 2023, 08:50:02 PM »

Quote from: Spacebus on April 25, 2023, 03:50:34 PM

I don't see it as "tacticool". To me it's "practi-cool"

[chuckling]

Sounds like a pun-isher gun when you put it that way!

moose · « **Reply #19 on:** May 07, 2023, 03:00:30 AM »

I still can't get my Jet 1 to take air ? Now you guys are at Jet 3 ? $:-\$

Thank you to our advertisers!

Hatsan Jet 3... WTH???

Author Topic: Hatsan Jet 3... WTH??? (Read 6092 times))