Nova Vista Freedom fill probe

[DRose]

I destroyed my onboard pump years ago. No parts to repair it. So I thought I could still fill it with a fill probe, and shoot it, (was a good shooter) but never had a probe. Pyramyd air is out of Seneca Aspen probes. Anyone know of another source? Don't care if factory or not. Thanks

[Back_Roads]

 I will dig mine out tomorrow, and measure, but this one looks darn close to what is needed.
https://www.ebay.com/itm/403944329498?

[DRose]

Looks right. I use my Gamo Urban probe to fill the other Nova Vista pcps. Thanks!

I will dig mine out tomorrow, and measure, but this one looks darn close to what is needed.
https://www.ebay.com/itm/403944329498?

[Wayne52]

For my Liberty I use the same probe that my Sentry's take.  It works fantastic on both the Sentry and the Liberty, it's made from steel instead of brass too.

[Back_Roads]

 The freedoms fill port is deep under the pump handle, so the long narrow probe is needed, unique to the Nova- Vista line. OK measured 7.5ish od, had to measure with a bolt gauge as my calipers are @ werk, of the probe end by orings. 70mm long or there abouts. I would feel confident that it will work , or just needs some sanding in a drill, with fine paper to get it just right.

[fatmike]

The liberty has a different fill probe then the freedom. I bought a freedom dill probe for my li erty when pa had them and it's to loose. I massaged the op about the one I have for a freedom that doesnt work on my liberty. Hopefully he replies.

[Hawkeye51]

David
After buying fixing and selling several freedom parts guns, I know that there was a run of guns with a different length probe. Good idea to measure the depth of your fill port, just to be sure.

[DRose]

Thanks guys. Looks like a &^^& shoot at best. I'll get the long probe and try it out. Dave

[Madd Hatter]

For my Liberty I use the same probe that my Sentry's take.  It works fantastic on both the Sentry and the Liberty, it's made from steel instead of brass too.

Liberty is a whole different cart of apples.