Hatsan Jet I/II Discussion

[miksatx]

Is that a 1 or a 2?

Mine is a 2. my pocket chrony missed a mag full pellets.

[naptemp]

shot string 250b to 150b     
Bullet : 7.9 gr Crosman

Shot count: 22
Low: 731
Hi: 833
Avg: 786
STD Dev: 27
Spread: 102

2024-01-23 06:27:15,772,FPS,10.5,FT Lbs,
2024-01-24 12:04:46,833,FPS,12.2,FT Lbs,
2024-01-24 12:05:24,821,FPS,11.8,FT Lbs,
2024-01-24 12:07:43,819,FPS,11.8,FT Lbs,
2024-01-24 12:07:54,821,FPS,11.8,FT Lbs,
2024-01-24 12:08:18,814,FPS,11.6,FT Lbs,
2024-01-24 12:08:31,793,FPS,11.0,FT Lbs,
2024-01-24 12:08:42,789,FPS,10.9,FT Lbs,
2024-01-24 12:10:33,807,FPS,11.4,FT Lbs,
2024-01-24 12:10:53,803,FPS,11.3,FT Lbs,
2024-01-24 12:11:06,791,FPS,11.0,FT Lbs,
2024-01-24 12:11:18,791,FPS,11.0,FT Lbs,
2024-01-24 12:11:28,791,FPS,11.0,FT Lbs,
2024-01-24 12:11:39,786,FPS,10.9,FT Lbs,
2024-01-24 12:11:49,782,FPS,10.7,FT Lbs,
2024-01-24 12:11:59,763,FPS,10.2,FT Lbs,
2024-01-24 12:13:41,763,FPS,10.2,FT Lbs,
2024-01-24 12:14:49,770,FPS,10.4,FT Lbs,
2024-01-24 12:15:05,752,FPS,9.9,FT Lbs,
2024-01-24 12:15:44,745,FPS,9.7,FT Lbs,
2024-01-24 12:15:59,747,FPS,9.8,FT Lbs,
2024-01-24 12:18:16,731,FPS,9.4,FT Lbs,
 

I have a .177 Jet 2.
I really hope I can improve the shot string.
I am fine with lower power but that spread is bad.

[Jayrotx821]

For the bottle conversion,  would brass fittings work or should I be looking at stainless steel exclusively?

[Back_Roads]

For the bottle conversion,  would brass fittings work or should I be looking at stainless steel exclusively?

I prefer stainless and matching brands if possible as to have the best fit.

[Jayrotx821]

Much obliged!

[Jayrotx821]

Is there a specific vendor you guys use for these fittings? There are some pretty large cost variations.   I'd hate to cheap out and risk safety.   Who would you recommend?

[miksatx]

I have a .177 Jet 2.
I really hope I can improve the shot string.
I am fine with lower power but that spread is bad.

Hope it has a better barrel then mine. I tried Hatsan for a replacement none in stock what they told me.
Good luck on the tinker trail!

[naptemp]

I have a .177 Jet 2.
I really hope I can improve the shot string.
I am fine with lower power but that spread is bad.

Hope it has a better barrel then mine. I tried Hatsan for a replacement none in stock what they told me.
Good luck on the tinker trail!

I have shot 150-200 pellets through my 177 Jet 2 since I got it yesterday.
I tried 7 different pellets.

The accuracy seems acceptable, on average about 1" at 18 yards.
That accuracy is not great, but I can live with it for the $160 I paid for it.
I fully expected it to be a 20 yards plinker, and that it is.

[miksatx]

My original barrel shot RWS Meirsterkuglen Pistol pellets the best out a bunch of others.

[naptemp]

My original barrel shot RWS Meirsterkuglen Pistol pellets the best out a bunch of others.

What was the accuracy with the original barrel?

[miksatx]

My original barrel shot RWS Meirsterkuglen Pistol pellets the best out a bunch of others.

What was the accuracy with the original barrel?

3/4"at 16yards.

[naptemp]

My original barrel shot RWS Meirsterkuglen Pistol pellets the best out a bunch of others.

What was the accuracy with the original barrel?

3/4"at 16yards.

What is the accuracy with the new Kral barrel?

[miksatx]

My original barrel shot RWS Meirsterkuglen Pistol pellets the best out a bunch of others.

What was the accuracy with the original barrel?

3/4"at 16yards.

What is the accuracy with the new Kral barrel?

pellet on pellet when I do my part lol. 1squirrel 2hosps!

[Insanity]

Jeff swung by for a visit and lunch today. He needed my SCBA fill station to fill his up. He also took my jet1 home to mess with, someone was asking him questions about it and its better to answer if he had it in hand. It developed a leak over the months and cold it was stored in. Its been so long I don't remember what I stored it at, and it had gotten well below freezing where it was stored so meh a few new oring's and move on.

[Privateer]

The very 1st thing I noticed about Matt's Jet 1?
And he will back me up on this. I told him the magazine looks like an FX Streamline magazine!
So guess what I just done did? Yep. Loaded the Streamline magazine and tested it.
Any guesses as to the results?
 

[Insanity]

I bet it worked.

[Privateer]

Bingo! We have a winner!
 
Same number of rounds in the magazine in a smaller housing.
The Streamline is also a metal body magazine.
Cocking was VERY smooth so another option for magazine choice Guys.

[miksatx]

Bingo! We have a winner!
 
Same number of rounds in the magazine in a smaller housing.
The Streamline is also a metal body magazine.
Cocking was VERY smooth so another option for magazine choice Guys.

Streamline like FX Streamline??

[Privateer]

Yes.

[Privateer]

Here's the Streamline magazine next to the Jet magazine.