Hatsan Jet I/II Discussion

[Back_Roads]

No Comment

[avator]

LOL James... I should hope not.

[EdinGa]

I'll throw up some eye candy for you to aspire to. 
I'm telling you this thing is addictive.

[avator]

Yeah I think I'll stop just short of the bottle conversion.   
I have 5 compressors and 5 tanks just steps away from the shooting bench and I rarely leave the shooting shed.
I shoot paper and little metal things out to 35 yards. 9 meters of that is indoors with heat, a fridge, internet, streaming TV and a/c. I also got a couple acres of mixed woods and open with a pond that I can run around on and shoot off hand.
Sounds like the JET 2 might be made for that.

[EdinGa]

I would say it is. These hits were made at 50 yards with mine regulated to 8 fpe. It rarely misses at 15 to 20 yards.

[avator]

I have one of these for it with quick lock rings.

https://buck-rail.com/2-6x32-aoeg-scope-with-rings/

[EdinGa]

I have one of these for it.

https://buck-rail.com/2-6x32-aoeg-scope-with-rings/

I've got one of those on my wife's Chaser carbine. It's a nice little scope for the money.


What caliber did you get?

[avator]

.22 and I also have 2 12 shot mags for it.

[Back_Roads]

I have one of these for it with quick lock rings.

https://buck-rail.com/2-6x32-aoeg-scope-with-rings/

 Not sure you will get proper eye relief with that scope, may need a cantilever 11mm  rail to get that right.
On that note just a reminder the Jet looks to have picatinny rail but is only 11mm compliant.

[avator]

I have one of these for it with quick lock rings.

https://buck-rail.com/2-6x32-aoeg-scope-with-rings/

 Not sure you will get proper eye relief with that scope, may need a cantilever 11mm  rail to get that right.
On that note just a reminder the Jet looks to have picatinny rail but is only 11mm compliant.

Yep, I noticed that.. I have options   

[Rat Sniper (AKA: PaulT58)]

I have one of these for it with quick lock rings.

https://buck-rail.com/2-6x32-aoeg-scope-with-rings/

 Not sure you will get proper eye relief with that scope, may need a cantilever 11mm  rail to get that right.
On that note just a reminder the Jet looks to have picatinny rail but is only 11mm compliant.

I'm not sure why they do that.  They claim it's both, but I have yet to get a picatinny mount to work, it's as if the 11mm mount stick up too high to allow the picatinny mount to grip the wider picatinny portion of the rail.  They need to just do one or the other and be done with it.  Apparently they/ve never heard You can't be everything to everybody!

[avator]

I have a cantilever mount and/or some 11mm to picca inserts.

[EdinGa]

The Monstrum Stealth I'm using has a little over 6 inches of eye relief so I was able to mount it forward of the magazine. The rings that came with it fit the picatinny rail too.

[avator]

I have the BR scope and cantilever mount on the SPA PP800 carbine now. It fits the breech rail on the shooter side of the mag so I would expect it to fit this gun as well. I have low rings on it so it's not high from bore center.
Everything points to the two 12 round mags from the Hatsan Flash QE working on the J2 and I have a silencer that I think I can adapt.
I have a holographic red dot that can be used as an option as well as a set of side mount bipod legs.
And I have a foam padded pistol case that everything will fit in nicely.

[EdinGa]

I'm using my .25 Flashpup magazines in mine and they work great.

[Back_Roads]

 1 more thing, the male foster on the gun is recessed so the provided female setup is a must. Seems to be a thorough informational video, to be taken lightly as it is sponsored.

[Privateer]

I'm using my .25 Flashpup magazines in mine and they work great.

Then the Vectis, Hydra, Flash & Flashpup magazines will work.

[avator]

And Paul is using the BullMaster/Barrage/Proxima/Sortie mag on his. The silver one.

[avator]

I saw a post or video ( can't remember which because I've spent the better half of the past 2 days looking at both) concerning the recessed foster fitting. The whole end cap screws off so you don't need the extended adapter. That will be nice if it's true. I'll know Monday as mine has shipped and I have tracking.

[miksatx]

just finished mounting the new NPO-1 barrel.