I have found that if you use the female foster fitting that came with it, you're fine, and other one is either too tight or too loose. You would think the industry could at least agree upon one standard size foster fitting! I added a male adapter to the female end that came from Hatsan, which works fine, but it's now no different than having to have another size fill probe since I can't fill the Jet without it. I probably should just replace the male foster fitting on the Jet nd be done with it!
True, the Notos is the better rifle! But, if you want something that is smaller or more easily converted to a pistol, the Jet is a good option.
Quote from: Rat Sniper (AKA: PaulT58) on December 21, 2023, 01:02:09 PMTrue, the Notos is the better rifle! But, if you want something that is smaller or more easily converted to a pistol, the Jet is a good option. Yep, you're probably right but I have that pretty much covered. I've since added a BR moderator and a compact scope.
Quote from: avator on December 21, 2023, 01:09:10 PMQuote from: Rat Sniper (AKA: PaulT58) on December 21, 2023, 01:02:09 PMTrue, the Notos is the better rifle! But, if you want something that is smaller or more easily converted to a pistol, the Jet is a good option. Yep, you're probably right but I have that pretty much covered. I've since added a BR moderator and a compact scope.That's a really sweet curve on your pp800. Don't want to steal this Jet thread, but can you link me over to any threads that describe your mods/fill/hammer etc. I'm working on a pp800r and am at 8.3fpe pretty stock, but was considering the 1.5mm valve stem extension and 4.0 or 4.2mm TP both sold by TR Rob
Quote from: EdinGa on December 21, 2023, 03:02:54 AMQuote from: naptemp on December 21, 2023, 02:38:21 AMQuote from: EdinGa on December 21, 2023, 02:24:27 AMThe adapter that's included in the box is actually a double male for their supplied female foster fitting. It will work as a silencer adapter but you'll have to drill it out if you have a .25 caliber. It should work fine for .177 or .22.Thank you for the information.Where is the female foster fitting you mentioned?It was in the box with my Jet 1 when I opened it. There are lots of complaints from owners who had to swap to the supplied female because a standard foster wouldn't fit the Hatsan male. I guess Hatsan decided to start including the female because of these complaints. I can promise you that the male to male adapter that's in the box will not pass a .25 pellet if you decide to use it as a silencer adapter. I had to drill mine out. Strange as the ldc 1/2 20 adapter Hatsan sent with my Jet 1 in .25 works just fine. as far as caliber fitment anyway.
Quote from: naptemp on December 21, 2023, 02:38:21 AMQuote from: EdinGa on December 21, 2023, 02:24:27 AMThe adapter that's included in the box is actually a double male for their supplied female foster fitting. It will work as a silencer adapter but you'll have to drill it out if you have a .25 caliber. It should work fine for .177 or .22.Thank you for the information.Where is the female foster fitting you mentioned?It was in the box with my Jet 1 when I opened it. There are lots of complaints from owners who had to swap to the supplied female because a standard foster wouldn't fit the Hatsan male. I guess Hatsan decided to start including the female because of these complaints. I can promise you that the male to male adapter that's in the box will not pass a .25 pellet if you decide to use it as a silencer adapter. I had to drill mine out.
Quote from: EdinGa on December 21, 2023, 02:24:27 AMThe adapter that's included in the box is actually a double male for their supplied female foster fitting. It will work as a silencer adapter but you'll have to drill it out if you have a .25 caliber. It should work fine for .177 or .22.Thank you for the information.Where is the female foster fitting you mentioned?
The adapter that's included in the box is actually a double male for their supplied female foster fitting. It will work as a silencer adapter but you'll have to drill it out if you have a .25 caliber. It should work fine for .177 or .22.
Ok mine made it today! knocking down the resettable squirrel 2' hole iron sights at 16.3 yrds. didn't have a ldc adapter with it. but i just happen to have one handy.
Quote from: miksatx on December 21, 2023, 07:24:10 PMOk mine made it today! knocking down the resettable squirrel 2' hole iron sights at 16.3 yrds. didn't have a ldc adapter with it. but i just happen to have one handy.If you bought a new Hatsan Jet then (in theory) it should come with an LDC adapter.What caliber is yours?How is the accuracy?
Put a scope on it and 2”is about as close as I’m able to put shots next together. So what pellet does everyone else use? And nothing good to say about the mags sprung way too tight. 8.2,9.3 RWS 8.4 FX 10.3Hades the new Benjamin 10.5 all shotgun cleaned barrel same story. Can’t believe how well it feels in hand but shoots soooo bad lol.
The .177 barrels are a problem. The pellet lead in mine was ground slightly off center, and extended WAY past the transfer port making the useable length that much shorter. Lastly the star shaped crown was an attempt to choke the barrel, it was way over done and distorts the pellet shape. Hatsan should replace the .177 barrels under warranty if they were a serious company.
Advertise Here
Share This!