Hatsan Jet I/II Discussion

[Rat Sniper (AKA: PaulT58)]

Yea, I found the DonnyFL fits better on the Jet 2 because the air cylinder doesn't stick as far forward as it does on the Jet 1.  Also, since the Jet 2 is not hot swappable, the diameter of the collor of the DonnyFL isn't as critical, it interferes with removing the cylinder on the Jet 1 and needs to be removed before unscrewing the air cylinder.  The Hatsan adapter has plenty of clearance for the Jet 1.

[PasadenaMike]

Yea, I found the DonnyFL fits better on the Jet 2 because the air cylinder doesn't stick as far forward as it does on the Jet 1.  Also, since the Jet 2 is not hot swappable, the diameter of the collor of the DonnyFL isn't as critical, it interferes with removing the cylinder on the Jet 1 and needs to be removed before unscrewing the air cylinder.  The Hatsan adapter has plenty of clearance for the Jet 1.

Ahhha that makes sense. I’ll just keep it maybe I’ll get an air arms s510 for it.

[7624452]

I know Bakers didnt add one Paul got 2 with an email they are jerking your chain. If I didn't post a pic of it I will and you can send that off as proof. They are not providing you with good CS and that is BS.

I do not really need it, but I like to get everything I pay for.  I have one made by one of the forum members who sells on Ebay.  I'll try again.  Thanks

[7624452]

I sent another email to hatsan.

[7624452]

Here is the reply:
The factory began adding adapters after the first couple of shipments without telling us, we are awaiting a package with additional adapters for the guns shipped prior to that event. please check back the middle of next month to see if we have them to send out.

[Rat Sniper (AKA: PaulT58)]

I figured they must have run out.  At least who you got this time took the time to check the actually status rather than just make up a lie!   

[avator]

Ha Ha.... sounds like a 2nd Tuesday of next week thing..

[Rat Sniper (AKA: PaulT58)]

Or another favorite:  Free Beer Tomorrow!   

[Back_Roads]

 Funny thing, I had the "included" adapter, and have only screwed a Hatsan thread protector on it 
Stretched mine out to 40 yards, using the shoulder stock, and was able to nail an aerosol can at 40 yards, with the open sights I modded, on my 2nd try, mud makes for easy hit spotting

[7624452]

So, the adapter extends the effective range ?  Did you test it with and without the thread protector ?

[Back_Roads]

So, the adapter extends the effective range ?  Did you test it with and without the thread protector ?

Can't say I have, I put it on ASAP.

[Rogerlj]

If I’m trying to post pics do they have to go through some approval? When I hit post I just get a blank box for another post. Sorry for my ignorance, I don’t post on forums much.

[Insanity]

If I’m trying to post pics do they have to go through some approval? When I hit post I just get a blank box for another post. Sorry for my ignorance, I don’t post on forums much.

You need a higher post count to post pics. I think its 20 posts?

[triggerfest]

Sorry, might be that the answer is somewhere in this thread already, but how does the Jet compares with the PP700/PP750 platform from Spa then ?

[PasadenaMike]

If you need a thread protector for the Hatsan factory 1/2x20 adapter I got this one from this place and it works good

https://www.infiniteproductsolutions.com/barrel-accessories/1220P-TP-K-BS

[Back_Roads]

Sorry, might be that the answer is somewhere in this thread already, but how does the Jet compares with the PP700/PP750 platform from Spa then ?

750 is regulated, Jet no,  the pp700 non regulated and  similar performance as the Jet. Notos is probably best of the mix, IMO, and I do not have one

[avator]

Yep, if I was going to get one it would be the NOTOS in .22.

[Rat Sniper (AKA: PaulT58)]

I agree the Notos offers a better value if you are wanting a Carbine.  If you are wanting a pistol or backpack gun, I feel the Jet is the better option because the stock offers a toolless removal/install and a moderator can be added/removed to make it more compact.  But, for shot count and consistency, the Notos is the clear winner if you're wanting a small, light weight carbine.

[avator]

SCulbert and his wife were here last weekend and I got to handle a NOTOS. It felt like quality. I wasn't expecting that.

[triggerfest]

Actually I was not really aware of the Notos yet, that is one neat looking airgun. Albeit slightly more expensive compared with the PP750 and Jet.

Thanks for your insights guys - appreciated