Hatsan Jet I/II Discussion

[avator]

Give them time, once they sit on Hatsan's shelves awhile, Field Supply will have the Refurbs on sale for much less!   

Yep, and not everyone is as well informed as our GTA brethren about purchasing options.

[Rat Sniper (AKA: PaulT58)]

Give them time, once they sit on Hatsan's shelves awhile, Field Supply will have the Refurbs on sale for much less!   

Yep, and not everyone is as well informed as our GTA brethren about purchasing options.

Yea, what a mob of enablers!!!   

[avator]

Guilty as charged... 

[Insanity]

Took Jetlee to work along with my nomad 2. I got 20 shots with JSB 25gn. 250 bar to 125 bar. Group isn't that good the distance maybe 15 20 feet and the iron sights I don't like much. Standing 2 hand hold no stock. I had to top out the rear sight to get near the bull.

She has some stink to her as you can see how deep the pellet is burrried I to this pallet at about 25 feet. It dose have some bark to it. 

I think it could be backed off some to get more shots. But 20 on a full fill of 250 to 125 bar is quite impressive to me at least.

I am really liking this gun it feels good in the hand and it's fun to shoot could use a mod if you want it back yard friendly.

[PasadenaMike]

Well ….I got a copy from PA in .25 I couldn’t pass up $229 plus 10% off. Also ordered an adapter from our good friend Donny. Should be fun

[hfenn]

The current configuration of my Jet 1 in .22 is with a Centerpoint red dot sight and a 0dB mod attached via DonnyFL adaptor. Shooting is mostly mechanical noise. Without the mod it has quite the bark. With my homemade ldc it's not as rimfire sharp sounding.
I have not been able to do chrony testing due to bad weather and wife's health problems.
Pellet testing I was surprised to find that so far it likes cheap WalMart Crosman Premier pellets better than any more expensive pellets such as JSB, H&N or Air Arms.
She has one squirrel to her credit.

[Back_Roads]

Well ….I got a copy from PA in .25 I couldn’t pass up $229 plus 10% off. Also ordered an adapter from our good friend Donny. Should be fun

 I forgot to mention, mine did come with an adapter for 1/2 20 lbc.

[PasadenaMike]

Well ….I got a copy from PA in .25 I couldn’t pass up $229 plus 10% off. Also ordered an adapter from our good friend Donny. Should be fun

 I forgot to mention, mine did come with an adapter for 1/2 20 lbc.

Hmmm maybe mine will come with one but I don’t mind supporting Donny

[Rat Sniper (AKA: PaulT58)]

Mike, I'm betting it does!  I reached out to Hatsan USA Customer Support earlier in the week asking about the adapters.  These showed up in the mail today!  Gotta love responsive manufacturers!

[PasadenaMike]

Mike, I'm betting it does!  I reached out to Hatsan USA Customer Support earlier in the week asking about the adapters.  These showed up in the mail today!  Gotta love responsive manufacturers!

Hmmm well if that’s the case now we have two

[Back_Roads]

Ioaded some slugs in my.25 during lunch and I was pleasantly surprised 😯 point of impact went up, adjusted the front sight for windage and drilled some nasty soda cans. Another thing I tried was using all the sights at once and that makes the sight picture better.

[PasadenaMike]

How’s the trigger on this little guy? I hope not like the Notos from the factory .

[Insanity]

I haven't shot mine enough to really pay much to what I am feeling its not heavy that I can say. I dont care much for the safety though.

[PasadenaMike]

I haven't shot mine enough to really pay much to what I am feeling its not heavy that I can say. I dont care much for the safety though.

Thanks . If you can’t remember then I’m going to say it’s not heavy enough to remember. The safety does seem strange

[Insanity]

I haven't shot mine enough to really pay much to what I am feeling its not heavy that I can say. I dont care much for the safety though.

Thanks . If you can’t remember then I’m going to say it’s not heavy enough to remember. The safety does seem strange

If you see my target a few posts back that should give you an indication of the force it takes to squeeze it.

[PasadenaMike]

Good nuff:)

[Rat Sniper (AKA: PaulT58)]

The Jets do have an adjustment screw on the trigger, but you have to remove the grip/guard to access it, unless you drill a hole through the guard.  Adjusting it takes up a lot of the travel and it can be set very close to the edge of releasing the hammer.  It would definately benefit from lighter springs, but I haven't gotten that far yet.  I did polish the contact surfaces on the trigger mechinism and hammer and that helped a little.  It still heavier than I'd like, but much smoother.

[Insanity]

My sight came in today so tossed it on and started to pull foam out and set everything into place. I didnt do a good job of placement of the stock but thats ok I layered in some foam to separate everything. I used the same trick to put the DFL a little higher in the case so its not sunk down too far.

[Insanity]

I dont know if anyone else pointed out that there is concordable amount of storage in the pistol grip. Pop off that plate and one who is that kinda thought forward could pack some items in it for say a backpack gun. Pellets maybe the mags or just one some other whatnots a feller or fellet would like to carry. All a guy is trying to say is take a look in there and you be the judge.

[7624452]

Mike, I'm betting it does!  I reached out to Hatsan USA Customer Support earlier in the week asking about the adapters.  These showed up in the mail today!  Gotta love responsive manufacturers!

I also inquired about the adapter.  Hatsan replied "The Jet does not include such an adapter"