are hatsan barrels choked?

[grizzlyadams]

 just wondering bfore i do a chop and recrown on the winchester 1000x i got

[Pete]

just wondering bfore i do a chop and recrown on the winchester 1000x i got

No..
I don't think any Hatsan has a chocked barrel..
never seen one...

[WHITEFANG]

Push a pellet through it and see iff it get tight toward the end.

[grizzlyadams]

 the pellet push method is inconclusive on barrel like this as the muzzle is turned down then"knurled" with some sort of stamping device to facilitate mounting the front sight. chinese beeman have this and while there is more resistance at the muzzle its not a choke and does nothing for accuracy. the reason i'm asking is because when i cut that are off the beeman barrels, the gun became more accurate

[Rescue912]

My Pneuma is but I don't believe any of the springers are. I had to cut down a Falcon Hunter because it had a bad spot in the last 1/2" or so and my groups really tightened up.

[NitroGary0]

My Mod60s is not choked, well I hope not, because I cut 3" off the barrel

[Raizer]

My Striker is not choked, the crown is maybe 4mm back from the end of the shroud.

[Lambchops]

Hey, what does "choked" mean in these terms?

[NitroGary0]

Hey, what does "choked" mean in these terms?

It just meens the muzzle end of the barrel tapers in very slightly to maximise the accuracy and power (consistancy) well it does on a shotgun

[Lambchops]

Hey, what does "choked" mean in these terms?

It just meens the muzzle end of the barrel tapers in very slightly to maximise the accuracy and power (consistancy) well it does on a shotgun

Thanks