Notice from NOE

[rsterne]

Moulds we have just run!
Will try to keep this list updated as we put moulds back in stock.
225-67-FN-A5                   9/29/22
258-120-FN-AM3               9/30/22
HTC308-165-RN-CG2        10/5/22
223-38-RN-CC1                10/10/22
358-152-HP-CF4               10/11/22
217-30-FN-BJ5               10/15/22
412-238-WFN-AP3            10/17/22
402-200-SWC-CH1           10/18/22

http://noebulletmolds.com/smf/index.php?topic=3347.0

Should be in stock, or in the Store very soon....

Bob

[Insanity]

Ordered a 4 cavity eeked in on that 15% sale coupled with my 10% 1000 club.

[The_Hare]

I ordered a four cavity 217-30-FN-BJ5 mold with the say discount arrangement.
One more off the list.  Now I need a .22 cal wadcutter, .30 bbt, and .35 bbt, and I will have a complete set of current molds.

[scion19801]

I snagged a 4 cav aluminum .217 boattail mold this morning before the savings ran out. interested to see what barrel I have in .22 cal impact this round takes to.

[Wayne52]

Dan those are one of my favorites, they shoot good out of the gun that you see in my signature, also Mrods and most of the old Crosman built barrels and possibly the new ones that are built in house   They also work perfect in
my Airmax Dominator, but the guns built by Alta Vista are way too tight.

This was recovered from a large chipmunk @25yds, it went from head to tail.

[scion19801]

mine has arrived and the .22 boattail mold in aluminum runs smooth like butter casting. shot a few through the impact. chambering is a touch rough. can feel the bands on the slug as it chambers. HMMMmmm, may have to run a few through the .218 sizing die. accuracy and weight consistency are awesome as always from this mold. .2 gr variance on a 4 cavity. Wahoo.

Down range this slug hits 1/2 to a 1/4 mil left of where the 218-25-RF-D6 is zeroed at. the slug stacks up and groups great at 32 yd zero. this is with unsized and un-lubed slug.
ok just checked by running one through sizing die. the rear band on this mold dropping at .219"- .220". there is just the slightest hint of sizing marks on the rear edge of the nose. thats awesome to see for me as i like mine to drop fat for resizing and truing. i'm also seeing about 28.5 gr weight average with pure lead.

I wonder if this is the new specs that Bob had proposed to Al on this 217-30-FN-BJ5. if it is I'm happy.

[Insanity]

I ordered some mold handles with mine that were or went on back order so I am waiting.

[Wayne52]

Dan that 217-30-FN spec's are the same as the original ones, they're an excellent shooting BBT too.

[rsterne]

These are the original BBT's, the tooling for the new ones is not yet done....

Bob

[scion19801]

I see that now. I should have looked at the spec drawing before posting. either way it is just what I was hoping for size wise. I can easily size down to .218". My .22 cal liner seems to prefer the .218 size.

[Wayne52]

Dan I've never tried shooting the BBT's at a high velocity and they seem right at home in the Mid 800fps range, they're all I shoot out of a couple of guns, the one in my signature and my SPA M16 (Airmax Dominator).
The Airmax Dominator is definitely un choked however when I asked Mike Melick he said the Sentry is slightly choke but I couldn't feel any choke when I pushed a round through the barrel so if they're choked
it's very little.  They really are accurate slugs though.

[scion19801]

current tune on my impact is shooting these at 890 fps average @ 44 degrees. I'll do another speed check once it warms up more here.

[Insanity]

My mold  and handles finally showed up today.

[sb327]

Does NOE email shipping notifications? I ordered several days ago but haven’t seen anything. I’m not in a hurry at all, just wondering.

Dave

[IMADMAN]

Does NOE email shipping notifications? I ordered several days ago but haven’t seen anything. I’m not in a hurry at all, just wondering.

Dave
[/quote
Go into your email and look for the order confirmation,  there should be a USPS tracking number.

[brewbear]

Does NOE email shipping notifications? I ordered several days ago but haven’t seen anything. I’m not in a hurry at all, just wondering.

Dave

Not that I remember of...

[Nvreloader]

Bob or anyone else,
Has Al given you any information about a 20 NOE mold, that might be in the works,
similar the longer 22 caliber molds? 
I want and need one before I go under.............

By any chance do you have a diagram for a 20?

Tia,
Don

[rsterne]

The .177 and .20 cal are in the works.... The .20 cal will be the same lengths, diameters scaled up to .20 cal, and weight 19-20 gr.... Tooling not done yet....



He is currently working on a .224 cal BBT, and the plan is to also produce a flat base version (0.090" shorter, no boattail, about 31-34 gr.).... Tooling done.... HP available too....



Bob

[sb327]

Does NOE email shipping notifications? I ordered several days ago but haven’t seen anything. I’m not in a hurry at all, just wondering.

Dave
[/quote
Go into your email and look for the order confirmation,  there should be a USPS tracking number.

Never got an order confirmation or shipping notification…. But it did show up in the mail yesterday, it’s all good 👍

Dave

[EdinGa]

I've been trying to get on the NOE website for a couple of hours now. Looks like it's down.