Air Venturi compact inline filter

[thumbs]

Does anyone know the size of the 0-rings that go on the inside of the quick connect foster fitting?  thanks

https://www.pyramydair.com/product/air-venturi-compact-inline-filter?a=9038

[nervoustrigger]

-010 for a genuine Foster coupler but some of the global manufacturers use M2 x 6.  The metric is ever so slightly fatter so when in doubt, try a -010 and if it won't seal you know you need the metric.

[thumbs]

Does this look like the M2x6 O-ring?  The -010 does not seal.  This on is a  bit fatter and smaller than the -010 I have used in other couplers in the past.

thanks again

[nervoustrigger]

Post a picture of that O-ring next to the -010.

[thumbs]

Ok here are the O-rings.

[thumbs]

I found a filter, seal set on line.  My ? o-ring is different than the seal in the kit.  I think, even though mine has been working, is probably not the right seals for the filter.  The ones in the kit look like the -010 rings so I am guessing they are probably the m2x6 rings.  Anyway we will see.  I ordered some m2x6. Should be here tomorrow.

[Trucker3573]

I’m guessing they are the same oring as any of the quick connect fittings we use?? I have not had to touch the orings in my av filter but these are what I use for any other quick connect I’ve changed and they work great. I get them at Home Depot.

[thumbs]

Thanks.  I'll keep that in mind.  I got some o rings in today.  The nice thing about it is they also sent a size sheet with the o rings.  An exact size you can put over the paper to determine the size of the o ring you dealing with.  Haven't used it yet though