Gamo Urban OEM moderator removal..(705 mentioned)

[tennx]

Anybody come up with a way to remove….looks to me cutting is involved….

While we are at it….how about the Sentry 705,I read about the 2x4 removal tool


many thanks

[Ribbonstone]

From what I remember, the Urban LDC is molded onto the barrel...barrel has a deep retraining groove...so it is not coming off by conventional means.

[rkrr20307@comcast.net]

I removed the pickle from both my Urbans by using a grinder wheel wire brush side and wire it down to the barrel on one side then it will come right off.

[tennx]

I removed the pickle from both my Urbans by using a grinder wheel wire brush side and wire it down to the barrel on one side then it will come right off.

Cool…what did u replace it with…

Thanks

[toddbrat]

I did mine a couple of years ago. Hope this helps.

https://www.gatewaytoairguns.org/GTA/index.php?topic=144466.msg1465516#msg1465516

[tennx]

I did mine a couple of years ago. Hope this helps.

https://www.gatewaytoairguns.org/GTA/index.php?topic=144466.msg1465516#msg1465516

Nice work….would u happen to know the OD of the barrel where the pickle was….

Thanks…

[toddbrat]

12mm OD. I could never get the accuracy I wanted from the shroud so bought an adapter off eBay with a 1/2x20 thread. It now wears a DonnyFL Tanto. I only run it about 14-15fpe so that is plenty.

[tennx]

12mm OD. I could never get the accuracy I wanted from the shroud so bought an adapter off eBay with a 1/2x20 thread. It now wears a DonnyFL Tanto. I only run it about 14-15fpe so that is plenty.

Would u happen to have a link for the adapter….thanks

[toddbrat]

I don’t have the one I bought but this should get you in the ballpark

https://www.ebay.com/itm/304143495735?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20190917065201%26meid%3D6b74389e581a41f19a98d880c3d3738a%26pid%3D100935%26rk%3D1%26rkt%3D12%26sd%3D274954717442%26itm%3D304143495735%26pmt%3D1%26noa%3D0%26pg%3D2332490%26algv%3DSimplAMLv9PairwiseUnbiasedWebCpr08MlcGreedyV3%26brand%3DUnbranded%2FGeneric&_trksid=p2332490.c100935.m2460&amdata=cksum%3A3041434957356b74389e581a41f19a98d880c3d3738a%7Cenc%3AAQAGAAABEOEFQvf1KhbQVqdCaWUvbzqFgkIUPItO8rc9Q4S4fSSaP6eS39GUCAZDjXuZsSPiVFeLcA%252BbDqULYY9Pyot6Px5XVMzZWmT6zxaPqux8aqci5xZRksVy69vaiTzhApyeDeKOXQ5xL2c0C6k%252FnWCfBWVRJKfMdCNwRt%252B24n7OH2tHY6LLGq8rA1ugEOplmtzVhwScKtmqcTlVCfrQP7DLdlHjI66QzwghHmgDR6LcXX6m65Tmrj7HyfkogLyKkH9QNuyYTxVm0e1Zh2in1F%252F5szKwUDe6nF6LR9wCh2WW6stITx4lC5XuN6N0fwStQ9%252Fyxw%252B0XlyegvhLFrlNx5yYJ53TaTZ3plQfkr%252FrkHor9baC%7Campid%3APL_CLK%7Cclp%3A2332490

[tennx]

I don’t have the one I bought but this should get you in the ballpark

https://www.ebay.com/itm/304143495735?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20190917065201%26meid%3D6b74389e581a41f19a98d880c3d3738a%26pid%3D100935%26rk%3D1%26rkt%3D12%26sd%3D274954717442%26itm%3D304143495735%26pmt%3D1%26noa%3D0%26pg%3D2332490%26algv%3DSimplAMLv9PairwiseUnbiasedWebCpr08MlcGreedyV3%26brand%3DUnbranded%2FGeneric&_trksid=p2332490.c100935.m2460&amdata=cksum%3A3041434957356b74389e581a41f19a98d880c3d3738a%7Cenc%3AAQAGAAABEOEFQvf1KhbQVqdCaWUvbzqFgkIUPItO8rc9Q4S4fSSaP6eS39GUCAZDjXuZsSPiVFeLcA%252BbDqULYY9Pyot6Px5XVMzZWmT6zxaPqux8aqci5xZRksVy69vaiTzhApyeDeKOXQ5xL2c0C6k%252FnWCfBWVRJKfMdCNwRt%252B24n7OH2tHY6LLGq8rA1ugEOplmtzVhwScKtmqcTlVCfrQP7DLdlHjI66QzwghHmgDR6LcXX6m65Tmrj7HyfkogLyKkH9QNuyYTxVm0e1Zh2in1F%252F5szKwUDe6nF6LR9wCh2WW6stITx4lC5XuN6N0fwStQ9%252Fyxw%252B0XlyegvhLFrlNx5yYJ53TaTZ3plQfkr%252FrkHor9baC%7Campid%3APL_CLK%7Cclp%3A2332490

Thanks …after I posted ..did a search and saw exact same one…lol

[K.O.]

I just wish you could get a threaded(1/2 unf) Buccaneer 18.5" barrel for them... in both .177 & .22..

[tennx]

I just wish you could get a threaded(1/2 unf) Buccaneer 18.5" barrel for them... in both .177 & .22..

Been corresponding with donnyFl…they can make anything u need….Ive got to work up the nerve to destroy both OEM pickles on the urban and sentry…..I got my beeman covered…

[avator]

Unless you're after more quiet, I don't mind the factory pickle on my Urban. To me it looks better than many of those after market tomato sauce can looking things.
I also found a leaky discounted Buccaneer and swapped the stocks. The wood looks much better on the Urban with it's shorter configuration. And the composite looks better on the longer Buccaneer.... IMO.
I have since fixed the leak in the Buccaneer and Betty Lou claimed it. I just wish they made cheaper mags for both.
Anyways.... Here is a pic of the Urban Buccaneer in all it's wooded glory.

[tennx]

Unless you're after more quiet, I don't mind the factory pickle on my Urban. To me it looks better than many of those after market tomato sauce can looking things.
I also found a leaky discounted Buccaneer and swapped the stocks. The wood looks much better on the Urban with it's shorter configuration. And the composite looks better on the longer Buccaneer.... IMO.
I have since fixed the leak in the Buccaneer and Betty Lou claimed it. I just wish they made cheaper mags for both.
Anyways.... Here is a pic of the Urban Buccaneer in all it's wooded glory.

To tell u the truth I dont like any of them suppressed …but I live in the city where it’s illegal…+ a lot of the stuff if not all looks pretty realistic….I respect my neighbors …..love the hobby and do not want to draw unwanted attention…and too old and broke to move to the country…lol

[Rick67]

I just wish you could get a threaded(1/2 unf) Buccaneer 18.5" barrel for them... in both .177 & .22..

Been corresponding with donnyFl…they can make anything u need….Ive got to work up the nerve to destroy both OEM pickles on the urban and sentry…..I got my beeman covered…

Yes, the OEM LDC does look funky (kinda like the same gun, really):


https://www.ransony.com/products/bsa-buccaneer-se-silentium-22-caliber-black-wood-stock-pcp-air-rifle-w-silencer?_pos=8&_sid=d19e80c3f&_ss=r



This one looks much better:



https://www.ransony.com/products/bsa-buccaneer-se-177-cal-muzzelbrake-beechwood-stock-pcp-air-rifle?_pos=11&_sid=d19e80c3f&_ss=r&variant=19882565009481

[K.O.]

My Buccaneers(.177 & .22) have Crosman baffles with carbon fiber shrouds...but that is just part of why I want the Buc barrels...

first is I really think a .177 Urban would be a really good idea... but also the Buc barrel is 3" longer...

pic of mine and my Urby post # 10   https://www.gatewaytoairguns.org/GTA/index.php?topic=181298.msg156101905#msg156101905

[avator]

The Urban stock fits the Buccaneer quite well. Both guns feel improved after the stock swaps.

[K.O.]

that is good in the linked thread I expressed concern the a Bucc in the Urban stock might feel nose heavy... the balanced feel of the Buc makes it feel lighter than it is to me...

my .22 loves the JSB K.O. best when using slugs... sub moa is common at 50 if I do not mess up... the .217 H&N 30g and BBT 30g(non hollowpoint) tie for 2nd...

Shot the lighter H&N first then turned plate over there was a light breeze... interesting that the K.O. landed lower...this was 40 yards... my Urban did very close to the same

Just got some .177 K.O. for testing to happen soon...

[tennx]

Well I still learned something…..

[avator]

LOL.... well I figured the question was answered so I thought I would offer a bit of desert....