What is the serial number on your Crosman 362

[avator]

Boxes crushed huh?

[Wayne52]

Bill you know Crosman, they're not going to let out all their secrets, could be real wide spacers of thick stack triwall too

[avator]

Wayne, I couldn't even tell you how many times I've seen pallets clearly marked "Do Not Stack" stacked 3 and 4 high.
I rolled back the camera the other day and watched a guy stack such pallets 4 high. He drove away and I watched the stack gradually lean until it fell. That guy got a drug test and a retraining. The department he drove for got a mess to clean up.

[Wayne52]

Bill there's undoubtedly a lot of people out there that flat out don't know what their brains are made for, what happened to simple common sense.

[avator]

Wayne... BTW... while shooting in the mancave today, I plan to binge watch Deadwood... 

[Wayne52]

I was also look to start binging on it again myself, I still need to bring the first four season of Yellowstone over to my brothers house, he's never even seen it but I've no doubt he's going to like it a lot.  You and Betty Lou are going to love 1883 it's getting some super high ratings too.

[avator]

LOL... I think you just hit Betty Lou's 'tickle bone'... she giggled like a school girl... 

[Wayne52]

I'm encoding a video shooting my numbers target with the C362, it's going to be long but it gives a good idea of just how accurate these guns can be when they're scoped.  I'll publish that one on youtube as well.

[avator]

Looking forward to that as well Wayne...
I think I'm going to get some numbers on the new 362 in it's stock 'out of the box' setup before I take the tools to it and swap it to .177.
I literally shot one .22 pellet out of the first one before it went to the 'tinker' bench.
It will also be fun to see the numbers compared to the first one and the new one with only the top end swapped. The bottom ends will be the only difference.

[EdinGa]

My box was in really good shape. The Styrofoam inside was all intact too. I was really hoping I wouldn't get a lower number because my intention was to mod it from the start. I might have to buy another one now. 

[Wayne52]

My box was also in excellent shape, however the pellets moving around in there did shred some styrofoam but not bad.

[EdinGa]

My box was also in excellent shape, however the pellets moving around in there did shred some styrofoam but not bad.

My pellets were wedged into the bottom of the shipping box with some wadded up paper. I had to cut the tape and pull them out from that end.

[avator]

My box was also in excellent shape, however the pellets moving around in there did shred some styrofoam but not bad.

My pellets were wedged into the bottom of the shipping box with some wadded up paper. I had to cut the tape and pull them out from that end.

That's how mine were.

[Spooner]

My box was also in excellent shape, however the pellets moving around in there did shred some styrofoam but not bad.

My pellets were wedged into the bottom of the shipping box with some wadded up paper. I had to cut the tape and pull them out from that end.

Same here on both accounts. I was amazed there was no damage to the rifle. There was one tiny little block of foam on the sight which was destroyed and little foam pieces stuck in all the gaps of the sight.

[StevenG]

Wayne, I couldn't even tell you how many times I've seen pallets clearly marked "Do Not Stack" stacked 3 and 4 high.
I rolled back the camera the other day and watched a guy stack such pallets 4 high. He drove away and I watched the stack gradually lean until it fell. That guy got a drug test and a retraining. The department he drove for got a mess to clean up.

Based on what I have seen in warehouses, he will do the same thing again his next shift.

[bender ville]

lets get back to serial numbers and a few tid bits orderded two 362s last week both off amazon differant venders both arrived today the first one by usps the second one by ups and drumroll please number one serial 1507  number two1333 both arrived boxes perfect have just been outside shooting 1507 the tid bits barrel was factory fithly cleaned and shot 30 rds fooling with the peepsite elevation was shooting so low off the paper at times any way around rd 30 with cpum it shaped up and at 21 yards started to shoot 1`  inch bullseyes many hole in hole i am over joyed two other things on number 1507 there is a tiny nick on the crown but since its shooting great not going to touch it it aint broke why fix it and i heard some body say they recieved pelltets with theirs neither of mine had pellets no big deal just wondered will report on 1333 later its pretty cold out oh and also the windage on 1507 was factory perfect

[avator]

Pellets came with the ones ordered directly from Crosman.

[EdinGa]

My #2 is arriving tomorrow from Crosman. It'll be interesting to see what serial number it is.

[bender ville]

ok so here is number two  serial number 1333  glad i bought 2 of these bestv 2 hundred dol ever spent so second on small adj up and small adj left and in bullseye zone after two rds 21 yrds cpum 6 pumps cant explain it but 1333 is a better gun just feels right differant then 1507 if any body knows what i mean both are good hits hard at 6 pumps so theres my report

[bender ville]

so ive just come inside from another shooting session and of my two 362s ser num 1507 and 1333 the latter is the gun 21 yards already producing quarter size consistent             groups with authority at six pumps cphp  just by chance if someone on here gets number 1332 or 1334 would like to hear from you 1507 shoots good just not the same am so glad i bought two thank you.