Accuracy results + my thoughts on the 362

[erdnuss]

I got an opportunity to shoot outside the other day and continued to get some great results with the superdomes.  At 20 yards, I got about a half-inch group off a sandbag, and it only took me 10 shots to hit 9 wine corks, which is really fantastic for me.  With that performance I can say I'm totally satisfied with the rifle. I don't hunt, but if I get some rats in my backyard again they had better watch out

[avator]

I get amaziiiing accuracy with both my guns at 25yds... 5 pumps... H&N Match 10.65. Both guns are .177 converted... 1 at 18" barrel and the other at 21".  The 21" has a TKO and is considered my "long silent gun". The 18" is my loud and proud, up close and personal gun.
I would not hesitate a shot at small game/pest with either.
This was exactly my goal for these guns when purchased. I have 15 tins of these pellets in stock. I have no reason, at this point for testing or shooting any other.
Sorry, not sorry..... 

[tennx]

I get amaziiiing accuracy with both my guns at 25yds... 5 pumps...

My accuracy is not amazing(me,not the guns)…but acceptable….its nice to have the extra 3 pumps if needed…but mine are 5 pump guns…lol…my 392S is a 4 pumper….good luck

[avator]

Bought 2 of the 392s. Sold one and the other is for sale.
They served the purpose.. until the 362 came on the scene.... 

[tennx]

Bought 2 of the 392s. Sold one and the other is for sale.
They served the purpose.. until the 362 came on the scene.... 

Understood….I have a bad habit/tendency to hang on to stuff…I guess thats why I have a “Gun Cave”….nobody in the family cares …so I gave my brother this website and told him to offer them up when Im gone..lol

[Keepingitsimple]

Mine has about the same accuracy at 25 yards as my Benji 392 does; one difference is the Benji takes 6 pumps to do what the 362 does at 5 pumps. Depends on the pellet of course. I like how it does great with cheap cphp.

I took off the 3-9X40AO Optima and am playing with a Winchester 4XAO on it at present. I've got a 2-7X32AO I'll likely put on it soon.

Has anyone tried the 19 gr Crosman domes in these?
25 yard groups of those is what I'd like to see.

[Keepingitsimple]

I get amaziiiing accuracy with both my guns at 25yds... 5 pumps... H&N Match 10.65. Both guns are .177 converted... 1 at 18" barrel and the other at 21".  The 21" has a TKO and is considered my "long silent gun". The 18" is my loud and proud, up close and personal gun.
I would not hesitate a shot at small game/pest with either.

Is that 21 inch barrel of yours the Disco barrel?
I've got some pigeons at 70 yards that need to be taken care of.

[avator]

It is the Disco SE 24" barrel cut and crowned at 21".

[Psipumper]

Mine has about the same accuracy at 25 yards as my Benji 392 does; one difference is the Benji takes 6 pumps to do what the 362 does at 5 pumps. Depends on the pellet of course. I like how it does great with cheap cphp.

I have had some good power and accuracy from my modified 392 guns. If my new 362 is the same accuracy that would be great.
My Benjamin at 4 pumps is the same as the 362 at 8.
The 362 will not have the same power potential but I hope to get  some more out of it.
People can compare to the 392 but  in modified form, they are extremely powerful. I had 860  fps the other day @ 8 pumps with the 14.3 crosman pellets.

[Keepingitsimple]

It is the Disco SE 24" barrel cut and crowned at 21".

Thanks Bill. I may just go that route with a 2nd 362.

[Keepingitsimple]

Mine has about the same accuracy at 25 yards as my Benji 392 does; one difference is the Benji takes 6 pumps to do what the 362 does at 5 pumps. Depends on the pellet of course. I like how it does great with cheap cphp.

I have had some good power and accuracy from my modified 392 guns. If my new 362 is the same accuracy that would be great.
My Benjamin at 4 pumps is the same as the 362 at 8.
The 362 will not have the same power potential but I hope to get  some more out of it.
People can compare to the 392 but  in modified form, they are extremely powerful. I had 860  fps the other day @ 8 pumps with the 14.3 crosman pellets.

Depending on the pellet, I'm varying between 0.75 and 1.0 groups. That's with Crosman 14.3 and AA 16.
My 392 can shoot .30 groups at 20 yards with a red dot and AA 16's; but, I keep it peep sighted. More fun that way. Less to go wrong on a camping trip.

[Psipumper]

Mine has about the same accuracy at 25 yards as my Benji 392 does; one difference is the Benji takes 6 pumps to do what the 362 does at 5 pumps. Depends on the pellet of course. I like how it does great with cheap cphp.

I have had some good power and accuracy from my modified 392 guns. If my new 362 is the same accuracy that would be great.
My Benjamin at 4 pumps is the same as the 362 at 8.
The 362 will not have the same power potential but I hope to get  some more out of it.
People can compare to the 392 but  in modified form, they are extremely powerful. I had 860  fps the other day @ 8 pumps with the 14.3 crosman pellets.

Depending on the pellet, I'm varying between 0.75 and 1.0 groups. That's with Crosman 14.3 and AA 16.
My 392 can shoot .30 groups at 20 yards with a red dot and AA 16's; but, I keep it peep sighted. More fun that way. Less to go wrong on a camping trip.

I took my new 362 apart to study it. Didn’t even check the accuracy. I trust it. The barrel looks nice to me as do the pellets l pushed through it.
I am going to take my time building it . I have a 1322 l could pirate parts   but don’t want to scavenge it.
I really like what I see  so far in the 362  design. The pump is much stronger than I expected.

[Keepingitsimple]

I took my new 362 apart to study it. Didn’t even check the accuracy. I trust it. The barrel looks nice to me as do the pellets l pushed through it.
I am going to take my time building it . I have a 1322 l could pirate parts   but don’t want to scavenge it.
I really like what I see  so far in the 362  design. The pump is much stronger than I expected.

My .22 lego has a better scope on it than the one I have mounted on my 362. It's staying on the lego. I'm not scavenging mine either. My 362 is ready to nail a coon or any other large varmint; but, my .22 and .177 legos are my killin guns.

[tennx]

Both of mine shoot well..177..22…back in the rack and Ive already moved on…good luck

[Keepingitsimple]

It is the Disco SE 24" barrel cut and crowned at 21".

Would that be part # 2260SE-001 or would that be part # 1760SE-001?
https://www.alliancehobby.com/discobbl.htm

Hopefully I can find a better price than what AH wants.

[tennx]

It is the Disco SE 24" barrel cut and crowned at 21".

Would that be part # 2260SE-001 or would that be part # 1760SE-001?
https://www.alliancehobby.com/discobbl.htm

Hopefully I can find a better price than what AH wants.

check with crosman…I got mine for $23.75 before shipping….Have u read the thread on AH….good luck
 1760SE-001. (Courtesy of avator)
I never bothered to have mine cut and crowned…but a local gunsmith said he could/would..

[mentolio]

Keepingitsimple: please read the thread on Alliance Hobby on this sight. I am still awaiting the conclusion of my fraud claim to my CC company regarding AH. They’re not what they used to be (meaning they seem to no longer be a legit business).

[Keepingitsimple]

It is the Disco SE 24" barrel cut and crowned at 21".

Would that be part # 2260SE-001 or would that be part # 1760SE-001?
https://www.alliancehobby.com/discobbl.htm

Hopefully I can find a better price than what AH wants.

check with crosman…I got mine for $23.75 before shipping….Have u read the thread on AH….good luck
 1760SE-001. (Courtesy of avator)
I never bothered to have mine cut and crowned…but a local gunsmith said he could/would..

That's the info I wanted. Thanks Phil. I'll be using a local gunsmith too.
In fact ... THAT is something I should have been doing all along.

I'm having tummy trouble at the moment. Have had for a few months now.
Infighting amongst health insurance providers has stalled treatment for that.
Makes it difficult to do any kind of work where I'm sitting in a hunched over position.

Would've been a lot better to have a gunsmith on retainer instead.

[Keepingitsimple]

Keepingitsimple: please read the thread on Alliance Hobby on this sight. I am still awaiting the conclusion of my fraud claim to my CC company regarding AH. They’re not what they used to be (meaning they seem to no longer be a legit business).

I wasn't even planning to. I used AH as a starting point for the barrel I'm looking for. I needed part numbers and better prices. Phil provided that. Thanks again, Phil.

[tennx]

Keepingitsimple: please read the thread on Alliance Hobby on this sight. I am still awaiting the conclusion of my fraud claim to my CC company regarding AH. They’re not what they used to be (meaning they seem to no longer be a legit business).

I wasn't even planning to. I used AH as a starting point for the barrel I'm looking for. I needed part numbers and better prices. Phil provided that. Thanks again, Phil.

Just paying it forward…avator bailed me out…as for stomach trouble…..been fighting gasritis since last October..brought on all sorts of things including a hernia which required surgery….good luck

Crosman recommended UPS as barrels were getting returned due to damaged….via usps…..I had several items in shipment …sorry I dont remember total cost….