Author Topic: Marauder rifle trigger group on a 13xx action (Read 1226 times))

bantam5s · « **Reply #20 on:** July 03, 2021, 10:34:18 AM »

Quote from: Tack Driver 10 on July 03, 2021, 08:44:45 AM

The gen 2 Mrod trigger will fit the 13xx tube.

It's covered here, remember?

https://www.gatewaytoairguns.org/GTA/index.php?topic=175055.20

Someone was wrong, because I can assure you that they absolutely will not fit.

Rick67 · « **Reply #21 on:** July 03, 2021, 11:18:19 AM »

Quote from: mobilehomer on July 03, 2021, 01:53:22 AM

It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.

bantam5s · « **Reply #22 on:** July 03, 2021, 12:18:45 PM »

Quote from: Rick67 on July 03, 2021, 11:18:19 AM

Quote from: mobilehomer on July 03, 2021, 01:53:22 AM
It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.

Dang that stinks.
Well at least I didn't already place an order with Crosman.
Hopefully my WTB turns up a gen1 someone is willing to part with.

Rick67 · « **Reply #23 on:** July 03, 2021, 01:22:55 PM »

Quote from: bantam5s on July 03, 2021, 12:18:45 PM

Quote from: Rick67 on July 03, 2021, 11:18:19 AM
Quote from: mobilehomer on July 03, 2021, 01:53:22 AM
It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.
Dang that stinks.
Well at least I didn't already place an order with Crosman.
Hopefully my WTB turns up a gen1 someone is willing to part with.

Read this one:

https://www.gatewaytoairguns.org/GTA/index.php?topic=99101.0

mobilehomer · « **Reply #24 on:** July 03, 2021, 01:57:59 PM »

Quote from: Rick67 on July 03, 2021, 11:18:19 AM

Quote from: mobilehomer on July 03, 2021, 01:53:22 AM
It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.

The EVP I checked is the 2010 to present, updated in 2018. It is the same as the Gen 1

https://hardairmagazine.com/ham-columns/marauder-and-challenger-2009-triggers-differences-and-similarities/

Rick67 · « **Reply #25 on:** July 03, 2021, 02:09:36 PM »

Quote from: mobilehomer on July 03, 2021, 01:57:59 PM

Quote from: Rick67 on July 03, 2021, 11:18:19 AM
Quote from: mobilehomer on July 03, 2021, 01:53:22 AM
It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.

The EVP I checked is the 2010 to present, updated in 2018. It is the same as the Gen 1

https://hardairmagazine.com/ham-columns/marauder-and-challenger-2009-triggers-differences-and-similarities/

Excellent link, sir!

If this is the case, then the Challenger trigger assembly should work, right?

Looking at $rcher $rgun's MROD and Challenger trigger assembly part numbers they seem to be identical.

Probably Stephen (AA owner) might be able to determine the sear difference between the 2.

Rick67 · « **Reply #26 on:** July 03, 2021, 02:35:32 PM »

Quote from: Rick67 on July 03, 2021, 01:22:55 PM

Quote from: bantam5s on July 03, 2021, 12:18:45 PM
Quote from: Rick67 on July 03, 2021, 11:18:19 AM
Quote from: mobilehomer on July 03, 2021, 01:53:22 AM
It has been a while since I ordered, but I copied the P/N straight from the Challenger EVP.

I just checked the current EVP and the number is correct.

The latest Challengers also use Gen 2 MROD trigger assemblies.
Dang that stinks.
Well at least I didn't already place an order with Crosman.
Hopefully my WTB turns up a gen1 someone is willing to part with.

Read this one:

https://www.gatewaytoairguns.org/GTA/index.php?topic=99101.0

Do you think it would work if you your this particular sear?

https://maverickcustomairguns.com/product/challenger-sear-lever/

bantam5s · « **Reply #27 on:** July 03, 2021, 03:06:27 PM »

The biggest problem is the whole housing that will not mount to a 13xx tube.
If it would then one could just swap or modify whatever necessary inside to make it work.

Rick67 · « **Reply #28 on:** July 03, 2021, 03:55:32 PM »

Quote from: bantam5s on July 03, 2021, 03:06:27 PM

The biggest problem is the whole housing that will not mount to a 13xx tube.
If it would then one could just swap or modify whatever necessary inside to make it work.

I see.

7624452 · « **Reply #29 on:** July 03, 2021, 05:22:30 PM »

What model of 13xx tube do you have ? Distance between the screw holes should not be different.

https://hardairmagazine.com/ham-columns/marauder-and-challenger-2009-triggers-differences-and-similarities/

bantam5s · « **Reply #30 on:** July 03, 2021, 06:36:08 PM »

Quote from: 7624452 on July 03, 2021, 05:22:30 PM

What model of 13xx tube do you have ? Distance between the screw holes should not be different.

https://hardairmagazine.com/ham-columns/marauder-and-challenger-2009-triggers-differences-and-similarities/

Changes have occurred since a lot of information made it online.

It's not really the difference between screw holes, it's just that this trigger housing is shorter.

Tack Driver 10 · « **Reply #31 on:** July 03, 2021, 06:41:16 PM »

A lot of conflicting info on this subject out there.
Copied pictures of both triggers, placed them together.
Top trigger is Gen 1, it's longer than the Gen 2 as noted.

To further complicate matters, Archer shows a picture of a Gen 1 trigger but ships the Gen 2 trigger.

7624452 · « **Reply #32 on:** July 03, 2021, 08:02:56 PM »

It's clear that they changed the length. I have never had a marauder, only used the trigger group to modify 2260's. Good luck with your build.

7624452 · « **Reply #33 on:** July 03, 2021, 09:38:59 PM »

I do not need this any longer. PM if you are interested.

bantam5s · « **Reply #34 on:** July 04, 2021, 08:02:42 AM »

Quote from: 7624452 on July 03, 2021, 09:38:59 PM

I do not need this any longer. PM if you are interested.

Absolutely, thanks.

HunterWhite · « **Reply #35 on:** July 04, 2021, 10:17:33 AM »

Could that be a Gen 1 trigger group with a Theoben/Rapid Air Weapons (RAW) trigger blade?

Tack Driver 10 · « **Reply #36 on:** July 04, 2021, 11:16:45 AM »

Quote from: HunterWhite on July 04, 2021, 10:17:33 AM

Could that be a Gen 1 trigger group with a Theoben/Rapid Air Weapons (RAW) trigger blade?

That's what it is.
Have the same setup on my 140.
Contoured the trigger blade some on mine.
Remove the lawyer spring and a few other tweeks to make it even better.

Thank you to our advertisers!

Marauder rifle trigger group on a 13xx action

Author Topic: Marauder rifle trigger group on a 13xx action (Read 1226 times))

bantam5s

Re: Marauder rifle trigger group on a 13xx action

Rick67

Re: Marauder rifle trigger group on a 13xx action

bantam5s

Re: Marauder rifle trigger group on a 13xx action

Rick67

Re: Marauder rifle trigger group on a 13xx action

mobilehomer

Re: Marauder rifle trigger group on a 13xx action

Rick67

Re: Marauder rifle trigger group on a 13xx action

Rick67

Re: Marauder rifle trigger group on a 13xx action

bantam5s

Re: Marauder rifle trigger group on a 13xx action

Rick67

Re: Marauder rifle trigger group on a 13xx action

7624452

Re: Marauder rifle trigger group on a 13xx action

bantam5s

Re: Marauder rifle trigger group on a 13xx action

Tack Driver 10

Re: Marauder rifle trigger group on a 13xx action

7624452

Re: Marauder rifle trigger group on a 13xx action

7624452

Re: Marauder rifle trigger group on a 13xx action

bantam5s

Re: Marauder rifle trigger group on a 13xx action

HunterWhite

Re: Marauder rifle trigger group on a 13xx action

Tack Driver 10

Re: Marauder rifle trigger group on a 13xx action