Author Topic: Barrel (Read 3179 times))

PGunner · « **on:** April 27, 2021, 09:39:36 AM »

Crosman 1377
Have any of you tried any barrel from ebay on one of your guns?

only1harry · « **Reply #1 on:** April 27, 2021, 12:51:26 PM »

I don't own a 1377, but if it's the same OD and it says it's for 1377's it should fit. Why eBay? Crosman barrels are not expensive.

Harry

PS. Moved to the Crosman Gate.

Matchstickshooter · « **Reply #2 on:** April 27, 2021, 01:13:52 PM »

Alchemy Airwerks sells on ebay. Very good to deal with!

CraigH · « **Reply #3 on:** April 27, 2021, 03:00:52 PM »

I bought two 2250 14.6" barrels (Pn 2250-019 - the one you see on ebay that mentions a "dimple") at Crosman this February for $9.80 each. Barrels are not shipped under the $4 flat rate, so get your list of parts together to justify the higher shipping charge.

Granted you want a .177 barrel, not a .22 barrel.

PGunner · « **Reply #4 on:** April 27, 2021, 03:04:04 PM »

Couldn't find them at Crosman.

HunterWhite · « **Reply #5 on:** April 27, 2021, 03:31:46 PM »

Here's a link to a list of Crosman barrels.

https://www.gatewaytoairguns.org/GTA/index.php?topic=93878.0

H. T. H.

Hunter

PGunner · « **Reply #6 on:** April 27, 2021, 08:00:03 PM »

The only thing I could find was a stock obsolete.
or I guess I'm just SOL

HunterWhite · « **Reply #7 on:** April 27, 2021, 09:22:34 PM »

Figure out what size barrel you want, then call Crosman, Velocity outdoors. You must call, you can't order online.

Main # 5856576161
Customer support 8007247486

Be sure to get the seal.

H. T. H.

PGunner · « **Reply #8 on:** April 27, 2021, 09:55:21 PM »

I could convert to a .22cal.
barrel $20 14in
breach $40 Steel
stock $25 Plastic

It doesn't seem like there as many up grade parts for the 177.
But I like that 1377.
I guess I'll call Crasman and see if I can get a 14in barrel.
Is the longer barrel better on the 1377?
Would it be worth the longer barrel, steel breach and the stock for the 1377 or convert to a 1322 about $90 either way?

Back_Roads · « **Reply #9 on:** April 27, 2021, 10:13:11 PM »

If going for a longer barrel, you may like the flatter trajectory of the .177also more pellet options, esp. thesr days with shortages.

Rick67 · « **Reply #10 on:** April 27, 2021, 11:12:31 PM »

Pyramid has them:

https://www.pyramydair.com/search-results-ext?keyword=crosman+barrel&sid=1375A617A415&N=0&Ntk=primary&q=crosman+barrel&cx=002970863286801882398:jlcminxfwdw&cof=FORID:11;NB:1&saSearch

Also Charles Melon who cuts and recrowns them, so they become more accurate:

https://mellonair.myfreesites.net/

https://mellonair.myfreesites.net/barrels

HunterWhite · « **Reply #11 on:** April 28, 2021, 06:22:15 AM »

I think that if you convert to 22 cal you need the barrel and bolt, and oring.
Chech the expanded parts diagram for each and note the differences.

Go to support.crosman.com
https://support.crosman.com/hc/en-us/sections/200658070-Crosman-Air-Pistols

PGunner · « **Reply #12 on:** April 28, 2021, 01:08:26 PM »

I called Crosman and was told I need the part # for a longer barrel for a Crosman 1377.
The part# above is for a 1322.
Do any one have the part# for a longer barrel for a Crosman 1377?

7624452 · « **Reply #13 on:** April 28, 2021, 06:23:31 PM »

There are no longer barrels specifically for 13xx. You will need a longer barrel, different barrel band and 1322 bolt & O ring.

PGunner · « **Reply #14 on:** April 28, 2021, 08:03:07 PM »

Something I found interesting on barrel crowns.
https://duckduckgo.com/?t=ffnt&q=is+a+croun+in+a+gun+nessary&ia=web

PGunner · « **Reply #15 on:** April 30, 2021, 10:14:05 AM »

Why does Crosman make it so hard to use there sight to find things?

PGunner · « **Reply #16 on:** April 30, 2021, 10:21:44 AM »

For that Crosman 1377 if I get a 24" barrel for it and cut it back to 14" and a stainless steel breach.
What else would I need to complete the mod such as front sight, O ring, large transfer orifice and if you have info as part# or where to get it.
I'll start a post with all tie info I gather and help others. This will include the 1377 and the 1322 .

BillK · « **Reply #17 on:** May 01, 2021, 04:50:49 AM »

Take the advise of other air gunners and get a barrel from Mellon or Alchemy Airworks. Much better than just a factory barrel.

Hoosier Daddy · « **Reply #18 on:** May 01, 2021, 07:37:20 AM »

Alchemy Airworks sells on ebay, his store is "NeedfulThings"
I have a 14" Crosman 1377 barrel from him.

Spooner · « **Reply #19 on:** May 01, 2021, 09:30:14 AM »

I am pretty sure that the only way you can get a barrel longer that what the EVP for the gun shows through Crosman... you have to have bought a gun from their custom shop. you wont find a part number for those longer barrels until they send you a receipt for the custom gun or part you ordered. The Lothar Walther match barrel in 14.6" for the 1377 for example is P1300-999, the Crosman 14.6" for the 1322 is P1300-112. I only know these because i have a 13xx custom shop gun in both calibers.

with Crosman's custom shop down for a barrel shortage, which is what they told me... Alchemy Airwerks, Mellon Air, or Alliance Hobby as suggested is where you will find one. with Alliance and Mellon, if you are in a hurry, their shipping times are usually 2 to several weeks. Alchemy, if he has what you are looking for... a few days to a week.

Thank you to our advertisers!

Barrel

Author Topic: Barrel (Read 3179 times))