Thinking over a Crosman 1377 for old times sake. Or 1322?

[Rick67]

A Lothar barrel will give the accuracy that you are seeking for.

[brewbear]

A Lothar barrel will give the accuracy that you are seeking for.

Thank you. Any thoughts on a supplier/seller?

[Rick67]

A Lothar barrel will give the accuracy that you are seeking for.

Thank you. Any thoughts on a supplier/seller?

If you happen to have a Crosman Custom Shop gun you could order LW barrel from them, particularly the 14”, which is very accurate.

That is how I got my extra one.

A 2300T also has a 10” LW barrel in .177—no need for a CCS gun on this one.

I have the part number somewhere and will post it later.

Alliance Hobby and Alchemywerks/Needfulthings also have them but more expensive.

[Spooner]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

[brewbear]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

Thank you for the reply. I was in fact looking at Alliance site (and drooling). I had picked the Lothar Upper Deck kit and the Flat Man's Pack but I'm not sure if I should go for the Flat Man's Pack yet? Are the barrel muzzles threaded for a future silencer/muzzle break?

[Rick67]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

Thank you for the reply. I was in fact looking at Alliance site (and drooling). I had picked the Lothar Upper Deck kit and the Flat Man's Pack but I'm not sure if I should go for the Flat Man's Pack yet? Are the barrel muzzles threaded for a future silencer/muzzle break?

They are not threaded.

[Spooner]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

Thank you for the reply. I was in fact looking at Alliance site (and drooling). I had picked the Lothar Upper Deck kit and the Flat Man's Pack but I'm not sure if I should go for the Flat Man's Pack yet? Are the barrel muzzles threaded for a future silencer/muzzle break?

as far as i know, the LDC and muzzle break options for this gun are all secured by Allen set screws, but i might be wrong about that? i have LDC's on all my 13xx guns as well as my 1077 and my 2400KT that are secured that way and they work perfectly. 

[brewbear]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

Thank you for the reply. I was in fact looking at Alliance site (and drooling). I had picked the Lothar Upper Deck kit and the Flat Man's Pack but I'm not sure if I should go for the Flat Man's Pack yet? Are the barrel muzzles threaded for a future silencer/muzzle break?

as far as i know, the LDC and muzzle break options for this gun are all secured by Allen set screws, but i might be wrong about that? i have LDC's on all my 13xx guns as well as my 1077 and my 2400KT that are secured that way and they work perfectly. 

Thank you. That is good news since I was gonna ask them to thread the muzzle.

[Spooner]

Thank you. Any thoughts on a supplier/seller?

The aftermarket sellers are going for around $99, so there is a little sticker shock to consider, but I always get mine from Alliance Hobby. He is a little slow at times with shipping, but he has all the barrel lengths in lothar walther, and does custom lengths if needed. Im not sure who else sells them, but sure others here can give you other seller options. 

Crosman CCS is the cheapest, if you have bought a CCS gun, but they have a barrel shortage so they are out until they get that resolved.

Thank you for the reply. I was in fact looking at Alliance site (and drooling). I had picked the Lothar Upper Deck kit and the Flat Man's Pack but I'm not sure if I should go for the Flat Man's Pack yet? Are the barrel muzzles threaded for a future silencer/muzzle break?

as far as i know, the LDC and muzzle break options for this gun are all secured by Allen set screws, but i might be wrong about that? i have LDC's on all my 13xx guns as well as my 1077 and my 2400KT that are secured that way and they work perfectly. 

Thank you. That is good news since I was gonna ask them to thread the muzzle.

You are welcome. It's not necessary and will save you a few bucks on the purchase. 

[brewbear]

I received my P1322 today and I like it. Out of the "box"-actually clam shell- is pretty accurate. Pumping is not bad but I hear the noise of a compressing spring at the end of each pumping cycle, I wonder if that is normal. Still waiting for a few tidbits before I start making changes. Now I'm thinking a matching one in .177 would be nice....rabbit hole indeed!

[orangeokie]

I added a Buck-Rail silencer kit ($25) and this thing is whisper quiet now.  I consider myself a stealth Starling eliminator in my back yard.

[brewbear]

I added a Buck-Rail silencer kit ($25) and this thing is whisper quiet now.  I consider myself a stealth Starling eliminator in my back yard.

That is very good to know, mine is arriving tomorrow (I hope).

[brewbear]

I have a question for the experienced folks here. I'm looking at Alliance Hobby site and I Can't decide between the Lothar Upper Deck kit- Cheaper by $100 than the Master Class Kit. Considering that I'm very new to air guns, which kit would you buy first?
Many thanks,
Ted

[Rick67]

I have never been enamored by flat top pistons and high power set ups for the 13xx.

For me, accuracy is what matters the most, so a precise barrel is top priority.

Have killed hundreds of rats with just 3-5 pumps 

Oh, my pumper needs to look good though, lol!

[brewbear]

I have never been enamored by flat top pistons and high power set ups for the 13xx.

For me, accuracy is what matters the most, so a precise barrel is top priority.

Have killed hundreds of rats with just 3-5 pumps 

Oh, my pumper needs to look good though, lol!

Good advice, thank you. I'll order the Lothar upper deck kit with the three screw breech mod and should I feel the need for more power, I can always order the "power" piston and such. As is, I have a few goodies coming today from Buck-Rail.

[Rick67]

Wise move, sir 

I have blue laminates coming to me from Mr. Corcoran for my next 13xx:





I like silver, so the metal parts (breech, tube, etc.) will be silver.

[brewbear]

Wise move, sir 

I have blue laminates coming to me from Mr. Corcoran for my next 13xx:





I like silver, so the metal parts (breech, tube, etc.) will be silver.

Very nice, indeed! Now I finally see I've stepped into a very deep hole...all the options

[Rick67]

I am very picky with my builds, and I do have very high standards, modesty aside:


https://www.gatewaytoairguns.org/GTA/index.php?topic=95142.msg156138981#msg156138981


#6 is a 13xx tube with a Gippeto offset-type AR buffer tube adapter:





The cost does not bother me for as long as I get what I want 

[brewbear]

I am very picky with my builds, and I do have very high standards, modesty aside:


https://www.gatewaytoairguns.org/GTA/index.php?topic=95142.msg156138981#msg156138981


#6 is a 13xx tube with a Gippeto offset-type AR buffer tube adapter:




The cost does not bother me for as long as I get what I want 

You, Sir, are a bad influence (and I thank you). I installed the Buck-rail LDC on my 1322 and it is whisper quiet now! I also installed the Red Dot bundle, this is starting to be a lot of fun. Waiting for the Lothar upper deck is going to drive me nuts!

[brewbear]

Got an e-mail from Alliance Hobby the other day, he is out of Lothar barrels It will take another couple of weeks before he receives now stock! Meanwhile, I'll order another 1322! BTW, Buck-rail is no hiatus until the beginning of May.....