Author Topic: Prod upgraded! (Read 30086 times))

RatRacer · « **Reply #80 on:** October 17, 2011, 08:49:40 PM »

Quote from: Paul in MD. on October 17, 2011, 06:44:18 PM

Are those tippman98 stocks all the same or are there differance in quailty,reason i,m asking is because the prices vary so much. Thanks.

The "You get what you pay for" adage applies with this one. Who wants to slap an $80 stock on a $60 airsoft.

darryl · « **Reply #81 on:** October 17, 2011, 10:26:13 PM »

I'm sure the Tippman I bought was at the lower end of the cost scale. It's OK, but it's cheek piece is bit of a wobbly goblin until you rest your face on it. Then it's fine. One day I'll buy a better one when I know what that means with these things.

DeutschKSK · « **Reply #82 on:** October 18, 2011, 10:28:05 AM »

Darryl, get one of the expensive ones that look like a Magpul stock.. they are rock solid and WAY better than the Tippmann one on my 1322.

Matt

darryl · « **Reply #83 on:** October 18, 2011, 02:59:09 PM »

How'd he get my wallet??!!!

RatRacer · « **Reply #84 on:** October 18, 2011, 04:29:49 PM »

Quote from: darryl on October 18, 2011, 02:59:09 PM

How'd he get my wallet??!!!

You left it at Gaskas......

darryl · « **Reply #85 on:** October 18, 2011, 05:08:18 PM »

Quote from: RatRacer on October 18, 2011, 04:29:49 PM

Quote from: darryl on October 18, 2011, 02:59:09 PM
How'd he get my wallet??!!!

You left it at Gaskas......

No soup for you!!!

(shroud adjuster needs a little adjustment)

RatRacer · « **Reply #86 on:** October 18, 2011, 05:53:08 PM »

Sweet! Winner, winner, chicken dinner.

Let me know how the sound is. Jim's gonna look at your barrel compared to a Mrod barrel due to your issues, possibly making me a Mrod length LW barrel in the .470 diameter.

MustangMike · « **Reply #87 on:** October 18, 2011, 06:04:48 PM »

I can still read that bottem address just thought you should know

darryl · « **Reply #88 on:** October 18, 2011, 08:57:07 PM »

thanks Mike. Now everyone knows where to send money!

I'll fix it.

MustangMike · « **Reply #89 on:** October 18, 2011, 09:10:24 PM »

Quote from: darryl on October 18, 2011, 08:57:07 PM

thanks Mike. Now everyone knows where to send money! I'll fix it.

lol

darryl · « **Reply #90 on:** October 18, 2011, 09:20:39 PM »

Anyone remember the Colt Buntline Special? My Prod, with it's Mrod barrel now makes me think of that pistol. A link (page down to see a picture):
http://www.kancoll.org/khq/1976/76_2_shillingberg.htm

By the way the P-rod seems to be shooting just fine, if a little quieter (unless I'm imagining it). I really need to get that chronograph so I can see what the barrel and the drilled transfer port are up to. I even bought some H&N FTTs (5.52mm, 14.66 grain) pellets to feed it.

DeutschKSK · « **Reply #91 on:** October 18, 2011, 10:19:41 PM »

Once that barrel breaks in it's awesome! Glad to hear that it is shooting good!

darryl · « **Reply #92 on:** October 30, 2011, 10:26:13 PM »

a small update on the P-rod. I got tot do some chrony testing this weekend. Not much, but I hope it's indicative (I'm looking for a chrony now). The 10-shot string from 2600 psi with both settings to max:
lo= 716FPS
hi= 738FPS
Av= 728FPS
Es= 21.9
Sd= 7.8
Av_FPE = 17
I'm researching the Disco spring mod to see if that might be of use with the 0.093 TP. If not, I'm pretty much satisfied with it.
Here's a short video of how it sounds:

MustangMike · « **Reply #93 on:** October 30, 2011, 10:40:37 PM »

that sounds even quiter then my tko disco

bodybag0 · « **Reply #94 on:** October 31, 2011, 01:13:12 AM »

Next time fill it up with air

Man thats quite.

darryl · « **Reply #95 on:** October 31, 2011, 09:37:03 AM »

happy! happy!! happy!!! I'm really happy (can you tell?) about how this little project turned out.

But as I said, I'll check out the Disco-spring mod.

BTW that's our member niclaw (Nick) in the video. I think this meet was his first time shooting PCPs. That (knock-down) shooter's bench was built for me by member Gary Hurley. He wants to post the plans here so guys can build their own. I took a video of him putting it together. Really simple design and it can be switched from righty to lefty in just a few seconds. Props to both.

Yeah, it's a quiet little critter, with good power and accuracy. The perfect urban pest assassin.
thanks guys!
darryl

RatRacer · « **Reply #96 on:** October 31, 2011, 10:07:43 AM »

Those are good numbers D. Thanks for posting.

darryl · « **Reply #97 on:** October 31, 2011, 03:37:56 PM »

thanks RR. you're welcome. are you still going in this direction? A little while ago I shot a 15.9 grain pellet into a tree near a hole. The Sun hit it just right so I could see it shining there. It took me four shots to hit that pellet and all dead-nutter close, but finally I whacked it. Range was 30 yards. Made me smile. I'd hit it with the P-rod while sitting in a chair with one leg crossed over the other, and my left hand resting on my knee, supporting the stock. I really like the balance.
darryl

RatRacer · « **Reply #98 on:** October 31, 2011, 05:22:36 PM »

Yeah, I'm still headed that way. Just wanted to get the standard config. buttoned up first. Got my LW factory length barrel today from Jim, so I'm not limited to 5.54 pellets any longer for accuracy.(I hope)

darryl · « **Reply #99 on:** October 31, 2011, 10:17:50 PM »

RR you know we're all waiting to read your results with the LW barrel. My stock barrel loved the 5.54mm H&N FTTs. I've now used the 5.53 H&Ns. The JSBs I used to put pellet on pellet at 30 yards was 5.52mm. Will you be pushing pellets through the LW barrel (checking the choke) before shooting them? Ought to be fun seeing it all come together.
darryl

Thank you to our advertisers!

Prod upgraded!

Author Topic: Prod upgraded! (Read 30086 times))

DeutschKSK

DeutschKSK