Author Topic: NEW Crosman 362 (Read 94439 times))

avator · « **Reply #620 on:** January 11, 2022, 05:25:41 PM »

DJ, you didn't get tracking yet? I order Saturday and got tracking today. It will be here Thursday.
Check your junk mail.

Wayne52 · « **Reply #621 on:** January 11, 2022, 05:28:59 PM »

I ordered mine Friday morning and got it today, four days and a few hours, very fast shipping for sure.

Spacebus · « **Reply #622 on:** January 11, 2022, 05:35:22 PM »

I placed the order an hour and a half ago, so I am not expecting it to ship until tomorrow at the soonest. It just takes things a long time to get to where I live. Even before the plague "prime two day shipping" was more like four day shipping.

Firewalker · « **Reply #623 on:** January 11, 2022, 10:43:46 PM »

Tracking shows arrival on Thursday by 9:00 PM. I also ordered a set of Buck Rail Crosman Scope Mounts, I'll put the Alpha 6 on her and see what she really has in her!

Spooner · « **Reply #624 on:** January 11, 2022, 11:36:50 PM »

Mine is scheduled to be here tomorrow between 2pm and 4pm.

Wayne52 · « **Reply #625 on:** January 11, 2022, 11:59:07 PM »

I just went up in the attic and did a couple three shot groups and I'm definitely happy with these at 30ft with open sights, I was sitting on an old lawn rocker resting on top of one of those small refrigerators with a box on top, I probably should have done a live video of it however I just flat out didn't feel like dragging more up there than I needed to. I may do that tomorrow though. I guess that I tweeked those sights pretty darned close though.

Back_Roads · « **Reply #626 on:** January 12, 2022, 12:07:52 AM »

Quote from: Firewalker on January 11, 2022, 09:43:53 AM

Quote from: Back_Roads on January 08, 2022, 03:03:20 PM
Found my scope mounts, 10m 5 shot groups, 7 pumps, Air Arms 16 gr. Pellet in the hole is .30 cal. Bad scattered target to the right is from my home cast wad cutters @ 7 pumps, but they settled in with 4 pumps. Next up is see how Poly-Mags fly.
BTW the scope is a UTG 4-16 x 40, about a 14 oz. scope, seems to be holding true with the Buck Rail 3D Printed Mounts, I did go and snug them up after about 30 shots and they were still good, but figured an extra re torque would not be a bad idea.

Would you be so kind as to post a link to the scope mount, please?
[/quote
Quote from: Firewalker on January 11, 2022, 09:43:53 AM
Quote from: Back_Roads on January 08, 2022, 03:03:20 PM
Found my scope mounts, 10m 5 shot groups, 7 pumps, Air Arms 16 gr. Pellet in the hole is .30 cal. Bad scattered target to the right is from my home cast wad cutters @ 7 pumps, but they settled in with 4 pumps. Next up is see how Poly-Mags fly.
BTW the scope is a UTG 4-16 x 40, about a 14 oz. scope, seems to be holding true with the Buck Rail 3D Printed Mounts, I did go and snug them up after about 30 shots and they were still good, but figured an extra re torque would not be a bad idea.

Would you be so kind as to post a link to the scope mount, please?
I just went to the site, loks like they are sold out ATM, maybe shoot them an email as to when back in stock ?
https://buck-rail.com/

Firewalker · « **Reply #627 on:** January 12, 2022, 09:25:43 AM »

I must have gotten the last one, my purchase went through.

Back_Roads · « **Reply #628 on:** January 12, 2022, 09:32:12 AM »

As long as it was not this Benj Sheridan setup you should be golden, https://buck-rail.com/product/benjamin-sheridan-combo-scope-mounts/ I imagine they can be printed up quickly, my other thought was they were short on stainless screws.

Firewalker · « **Reply #629 on:** January 12, 2022, 09:45:00 AM »

I got the 1377 mount:

superchikn · « **Reply #630 on:** January 12, 2022, 10:00:05 AM »

Looks like they are not showing out of stock now.

I have a Baker aluminum breach on order for mine but I received the Benjamin Sheridan mounts for my Blue Streak on Monday. I installed a pistol scope in scout position and I can shoot it now.
I really like Buck rails products. I have a moderator ordered for my 362 which should be here by the end of the week. Tracking is not telling me much yet.

Keepingitsimple · « **Reply #631 on:** January 12, 2022, 10:41:31 AM »

My C362 will arrive Thursday. It was held up in Syracuse N.Y. this past weekend for 3 day's for ...alleged...weather conditions....

My Prediction: UPS employee's will have opened the box its in and were playing with it, shooting it all weekend. Somebody else's order is likely now missing a tin or two of pellets.

Spacebus · « **Reply #632 on:** January 12, 2022, 10:44:36 AM »

My 362 order went through, or at least they are billing my bank account. I don't expect to see it till some time next week, but I haven't gotten tracking info either.

EdinGa · « **Reply #633 on:** January 12, 2022, 11:05:43 AM »

Quote from: Spacebus on January 12, 2022, 10:44:36 AM

My 362 order went through, or at least they are billing my bank account. I don't expect to see it till some time next week, but I haven't gotten tracking info either.

My bank account was debited too. Still no tracking number, but I didn't order until yesterday morning. I can't do anything with it until sometime next week anyway.

avator · « **Reply #634 on:** January 12, 2022, 05:34:04 PM »

One thing else I think I'm going to do with this gun that I have never done before...
I happen to have 2 Pro Chrono Digitals. After sighting in and assuring myself that I can repeat some safe groups, I'm going to set one of the PCDs at the muzzle, as I normally do, and the other downrange at the target. Probably just 25yds out just to get some true data. If things go well and I don't shoot the darn thing, I may stretch it out some more. That's after I get the barrel seasoned in and the gun settled down.

EdinGa · « **Reply #635 on:** January 12, 2022, 05:48:52 PM »

I've done that and I put a brick in front of my screen. I didn't hit it, but it gave me peace of mind.

avator · « **Reply #636 on:** January 12, 2022, 06:07:49 PM »

I have a hunk of 3/8 poly glass I could use.

Firewalker · « **Reply #637 on:** January 12, 2022, 06:52:00 PM »

Quote from: superchikn on January 12, 2022, 10:00:05 AM

Looks like they are not showing out of stock now.

I have a Baker aluminum breach on order for mine but I received the Benjamin Sheridan mounts for my Blue Streak on Monday. I installed a pistol scope in scout position and I can shoot it now.
I really like Buck rails products. I have a moderator ordered for my 362 which should be here by the end of the week. Tracking is not telling me much yet.

This one from Baker?

https://www.bakerairguns.com/product/aluminum-anodized-black-receivers/

superchikn · « **Reply #638 on:** January 12, 2022, 08:02:02 PM »

Yup, I have one on my 1322.
never had a steel breech to compare it to.

Firewalker · « **Reply #639 on:** January 12, 2022, 08:11:32 PM »

Looks REALLY good to me due to the left hand bolt. Back a few years, I got a precision rifle for cheap but it was a lefty, from a rest, it was twice as fast to cycle with my left hand (I never took my finger "off the trigger") and I just loved it. This would be a great opportunity for me and also allows my boys (lefty's) to shoot with me.

Thank you to our advertisers!

NEW Crosman 362

Author Topic: NEW Crosman 362 (Read 94439 times))