DAR Gen II is now available

[Dan H]

Now that I have two side lever guns I really do love them more than bolts.

The side lever just has more leverage than the bolt's ,  and that usually does making it more smooth , and easy  ... the best feeling one I have is the under lever hatsan vectis LOL !  it's kinda funny  ...  .... but that is the fastest best repeating action I own hand position is better for fallow up repeat shots ...

[Insanity]

At one time I was eyeballing a vectis.

[Back_Roads]

Now that I have two side lever guns I really do love them more than bolts.

The side lever just has more leverage than the bolt's ,  and that usually does making it more smooth , and easy  ... the best feeling one I have is the under lever hatsan vectis LOL !  it's kinda funny  ...  .... but that is the fastest best repeating action I own hand position is better for fallow up repeat shots ...

X2 on the underlever action on the Vectis , have one in .25, see no need for semi or full auto pellet/ xlug gun. I can accuratly spry enough lead to do the deed with the Big V, wow I just named another of my airguns   
 One issue I have is I still keep looking down the barrel to see how much air is in a Hatsan then go OH they moved it to a safer location 

[Trucker3573]

They look super awesome for sure. The website is 150% lacking. Way too basic. Doesn’t even say where they are located. I believe the guns are manufactured in China? Ugh...I already have one China gun.  How’s the support on these?? Anyone have any experience with them?

[avator]

I thoroughly enjoy my DAR .25.... YMMV

[Dan H]

They look super awesome for sure. The website is 150% lacking. Way too basic. Doesn’t even say where they are located. I believe the guns are manufactured in China? Ugh...I already have one China gun.  How’s the support on these?? Anyone have any experience with them?

Joe ,and the guy's at DAR /Aimsports  are moving their game up on parts ,and working on the gun's , they have had issues with bad o rings so now every gun that goes out has been gone threw with new o rings ,and increase in poppet seal area ...

[singleshotcajun]

Today I planned to shoot my Pedersoli long range rolling block rifle 45-70 with a new load but woke up at 0100 with leg cramps and stayed up and stayed at home. I am a Millwright/Machinist and am getting too old for that feces. Charged my DAR to 20 MPA , shot forty shots with Crosman 14.3 Domes,  FPS 798.7 STD 3.2 to 15 MPA . I ran out of CPHP 14.3 shooting other rifles last week. I am pretty pleased with the average and shot count with the domes.

Today I repeated last weekends 40 shots using 5 MPA at around 800 FPS with Crosman domes. . Charged tank , shot 40 shots to 15 MPA. Last twenty shots on Air Rifle chicken silhouettes with no misses at twenty yards. I AM TICKLED.
I bought a Caldwell knockoff of a Harris Bi-pod that has the cant adjustment and it sure is nice , it is now living on the DAR.

[NHGuide]

Somebody could make a stem with a slot in it to fit over the side lever, then attach it with set screws.

kind of like the Thompson Center Contender Hammer spur!!
 yes.!  I ain't no machinist but ... yes! I bet that someone could ! ( just not me)

[thesandman]

Are these guns with all the problems Gen 1 or both?

[Firewalker]

Are these guns with all the problems Gen 1 or both?

All three of mine are Gen ll.

[avator]

Mine is the Gen II.

[singleshotcajun]

Mine is the Gen II.

Ditto

[thesandman]

Wow.  I was hoping they would get bugs out prior to reissue.  Guess they won't be the gun of the year.  Glad I read this before I jumped.  GTA is helping to save many from the disappointment you have endured.

[avator]

Are there any $300 PCP guns available that are totally bug free?
Most of the issues I'm reading about with these guns are leaks that can be fixed.... leaks that would eventually need attention with use anyways.

[thesandman]

I paid $179 for a great shooting gauntlet.  No leaks.  It did cock hard though.  The regulator held good although set@1000psi.  To buy a new gun that isn't operable from numerous leaks would chap my - you know what.

[crazyhorse1]

I paid $179 for a great shooting gauntlet.  No leaks.  It did cock hard though.  The regulator held good although set@1000psi.  To buy a new gun that isn't operable from numerous leaks would chap my - you know what.

Of all the PCP's I've bought new since 2007 the DAR was the first leaker out of the box...and,, it was a GEN II. Doing good now after warranty service...I have a Evantix DUK Hunting Master AR6 that dates back to 1990's that I had resealed 5 years ago but it never had leaked...not to mention 6 other PCP's going on 10 years now. No more bubble gum O=Rings...

[Privateer]

I've paid a lot more for Guns that couldn't hit the side of a barn if I stood 10 feet away and threw the gun at it!
I'd much rather deal with a leak then POI issues from many different causes.

[Trucker3573]

The phone number listed on their website doesn’t seem to work. Says it all for me. Glad you guys like yours. Will spend the extra dough on piece of mind for a marauder 25.

[Firewalker]

The phone number listed on their website doesn’t seem to work. Says it all for me. Glad you guys like yours. Will spend the extra dough on piece of mind for a marauder 25.

Sorry to hear that your not interested in the DAR's, we are experiencing 25mph crosswinds right now and with JSB Exact Kings, 25.39gr, I piled two of them on top of each other at 50 yards then took to defending the bird feeder against HOSPS.

2 dot hold over from the X I drew would have been a bullseye! You dont know what you are missing!!

[Insanity]

The phone number listed on their website doesn’t seem to work. Says it all for me. Glad you guys like yours. Will spend the extra dough on piece of mind for a marauder 25.

There is another phone number that I am aware of that works.