Author Topic: Benjamin 267 problem (Read 298 times))

Dave S · « **on:** September 15, 2020, 10:33:43 AM »

The valve seat in my 267 has a crack in the valve seat and won't seal properly. I do have a scraped 262 which has a good valve. Does anybody out there know of someone who can swap out the valve? De-soldering the valve is above my pay grade. Any advice or help would be greatly appreciated. Thanks, dave

KevinJBrown · « **Reply #1 on:** September 15, 2020, 12:43:52 PM »

Welcome to the GTA Dave!

You might want to take a look around the forum see if you can find the information you're looking for or a place to start up a conversation about your 267.

Wayne52 · « **Reply #2 on:** September 15, 2020, 02:32:04 PM »

Welcome to GTA Dave !!!

Bentong · « **Reply #3 on:** September 15, 2020, 06:28:53 PM »

Welcome Aboard 👍🏽

avator · « **Reply #4 on:** September 15, 2020, 06:54:10 PM »

Dave...
With well over 600 posts you are far from a new member.... lol
I'll move this thread to the PCP gate where it will get more traffic.

eeler1 · « **Reply #5 on:** September 16, 2020, 01:36:39 AM »

Check with Tim at Mac-1, he’s the master of solder

Thank you to our advertisers!

Benjamin 267 problem

Author Topic: Benjamin 267 problem (Read 298 times))

Dave S

Benjamin 267 problem

KevinJBrown

Re: Benjamin 267 problem

Wayne52

Re: Benjamin 267 problem

Bentong

Re: Benjamin 267 problem

avator

Re: Benjamin 267 problem

eeler1

Re: Benjamin 267 problem