AV Avenger

[tracker1955]

He should be fine as long as he doesn't shoot at golf balls, the real ones that aren't chalk.

[fgwhite]

my eyes are bad on the left side of the gun looked like it was a on the 3 does that mean 300 bar it saided 4351 on the box them guages are hard to read got my ldc on my gun and i can remove the fill cover not a problum  what do you guys think how a bout hajamoto baffle kit for one these guns ?

[RunsOnAir]

Fred, I don't know about Hajimoto's magical kits, but I can chime in regarding the gauges:

300 bars are equivalent to 4351 PSI (pounds per square inch).
In the USA, we love our PSI units where the rest of the world has moved to the metric system and uses bars for pressure instead.
The gauges are using bars, and you are correct, the 3 is for 300 bars ( there is a 'x100 showing the multiplication on the gauge, it may be hard to see).

[MaineJim1821]

The inside scale (red) is BAR x100,the outside scale (black) is PSI x1000.

[fgwhite]

thanks guys i haft to get me some glases but i figure it out

[avator]

Fred.... Yellow means fill. Green is good. Red means stop filling..... 

[Norcal]

Fred.... Yellow means fill. Green is good. Red means stop filling..... 

My GF thinks Red means Stop, Green means Go, and Yellow means Go Very Fast...

[mrbulk]

Fred.... Yellow means fill. Green is good. Red means stop filling..... 

My GF thinks Red means Stop, Green means Go, and Yellow means Go Very Fast...

  that would be my wife as well...

[BconCT]

As far as air strippers and baffles for this gun i have seen people mention the haji combo as well as the one from geoffk offered on ebay is there any data as to which works the best if at all?

[PumaCarl]

My brother got the Hajimoto baffle kit and it definately helps. I believe it was worth it, even if you still end up putting a DonnyFL on it. He had already put 6, 1mm ports on the shroud, so I don't know how the kit would sound on a un-ported shroud, but it really cut the bark on his. He is running his Avenger at full power so it really needed something.

[Dan H]

I decided to get the Avenger .22  ... so I got on Randys list at RL... the .25 Avenger i bought has worked out so well  I just had to get 1 in .22       

[Norcal]

How are your Avengers doing guys? Randy @ RL Airguns is thinking his next shipment will be here around Sept 20th and I'm on his list for a .22. Hoping to get it and get out and tear-up some Ground Squirrels but most of Kalifornistan either has burned or is burning.

[Holden Over]

Is anyone concerned about all the plastic on it scope mounts look plastic and the side lever is plastic from reviews I have seen

I am as well, they did an excellent job giving this much in a $300 pricetag....but I'll tell you what give me a match grade trigger and upgraded stock on this platform for a marauder price and this gun will set a new bar for even the high end pcps costing over $1000.

I wonder if the first manufacturing cycle was to see if 'the odd would hunt" in terms of sales. That having been proven I hoping we will see another version with a wood stock and some other upgrades. If the sales on them keep screaming along as they  have so far the after market availability of custom wood stocks might develop.

[Dan H]

How are your Avengers doing guys? Randy @ RL Airguns is thinking his next shipment will be here around Sept 20th and I'm on his list for a .22. Hoping to get it and get out and tear-up some Ground Squirrels but most of Kalifornistan either has burned or is burning.

David ... my Avenger is doing great so far honestly nothing comes close to it for the money  6 lbs with all those features . I have around 600 shots reg set at 2200 hammer spring all the way out 880 fps 25.39 kings  3 shot hole threw hole groups at 50 yards , I have a .25 Gauntlet that is very accurate same ammo and hole threw hole accuracy out at 50 , The Avenger I have now dialed in to equal that great shooting Gauntlet but the Avenger has it beat in every other category ....

In fact this gun has performed so well I am also on Randy's waiting list for a .22  , I think about it this way for 600 bucks I get 2 guns . .25 and .22  ... the weakest point about the gun is the plastic stock... 
 yet that is what helps keep the gun very light and for myself it just fits my body well , plus the pic rail sits far back enough so you can mount the scope so it sits further back  which fits me better ,and helps balance the gun better ...

Our state here in Wasington is burning up also I have never seen the sky this bad before sun almost blacked out at times , liberals miss managing our forest is the problem 

[AVS Stephen]

Just did a video on the tear down and mods in case anyone is interested.

[RunsOnAir]

Just did a video on the tear down and mods in case anyone is interested.

Thank you Stephen for all the content you create and provide!
Already seen this one twice. Some parts many times already.
I'm a visual learner and you spend a significant amount of time showing what you do and talk about.
To borrow shamelessly from another you-tube content creator I appreciate greatly: "Thank you doesn't quite say it" 

[Madd Hatter]

Just did a video on the tear down and mods in case anyone is interested.

Stephen, you need to update your avatar to one of your liberties. Show off those beautiful hand made stocks of yours.

[AVS Stephen]

Thank you Rowan and Robert. I will change my avatar.

[scratchnv]

Another great video Stephen. I learned so much from your videos on the Nova Liberty. I was hoping you would get your hands on the Avenger, so we could learn about the internals of the gun.  I really appreciate the effort you put in.
Also, keep up the great work on your AVS slugs.  They are fantastic in .22.  Can't wait to try the .25's.
Thanks again Stephen.

[MaineJim1821]

I too want to express my appreciation to Stephen for taking the time to make the video on the Avenger.