Author Topic: ssp250/1389 loading gates (Read 2801 times))

ped · « **on:** June 17, 2020, 02:44:43 PM »

a few years back i had some brass loading gates made but wasn't going to have any more made
a good friend on your side of the pond asked for a few so i'm haveing 5 made and if there is demand i'll have more made
until i get them i have no idea on cost and you'll have to get your own insert

7624452 · « **Reply #1 on:** June 18, 2020, 12:56:38 AM »

I will take at least four. Thanks.

ped · « **Reply #2 on:** June 18, 2020, 06:00:55 AM »

no probs i'll increase this current order
i'm not sure on cost as yet though

YEMX · « **Reply #3 on:** June 18, 2020, 08:12:13 AM »

Are the loading gates themselves all the same size, and the inserts are what determine the calibers- or does the loading gate itself determine the caliber? Did that make sense? I wouldn't mind getting two of these.

ped · « **Reply #4 on:** June 18, 2020, 10:54:15 AM »

gates are all the same size and it is the inserts that determine caliber
i've doubled the order to 10 with 7 provisionally accounted for once i have them in my hand i'll have a price for them and those who expressed an interest will have first refusal

Mike Baker · « **Reply #5 on:** June 18, 2020, 11:17:32 AM »

I have all 3 sizes of inserts. Email me if you need them. Please send your complete mailing info to get shipping cost with order. Not just zip. peter_built 78@hotmail.com
151A024 .177 $4.25 each
151A224 .20 $2.00 each
151A124 .22 $2.00 each
plus shipping

YEMX · « **Reply #6 on:** June 18, 2020, 02:03:18 PM »

Gentlemen, you have made me an extremely happy person!!! I thank you!

Stinger177 · « **Reply #7 on:** June 18, 2020, 02:18:44 PM »

Quote from: Mike Baker on June 18, 2020, 11:17:32 AM

I have all 3 sizes of inserts. Email me if you need them. Please send your complete mailing info to get shipping cost with order. Not just zip. peter_built 78@hotmail.com
151A024 .177 $4.25 each
151A224 .20 $2.00 each
151A124 .22 $2.00 each
plus shipping

Hi Mike. I just emailed you about your inserts. If you don't see it, check your spam. AOL often goes there.

Forgot to mention in the email that I'm looking for .177 only.

Dennis

Mike - UPDATE - My AOL send did not go though. I resent it via the email link here in GTA.

Let me know if you get it.

Thanks,

Dennis

Stinger177 · « **Reply #8 on:** June 18, 2020, 02:20:39 PM »

Ped - I'll take six of them.

Dennis

ped · « **Reply #9 on:** June 18, 2020, 02:51:26 PM »

currently only 3 left unspoken for but once this first batch is made and all is good i'll get another run done Dennis, i will though see if the order can be increased
Mike would it be possible to get a few of each inserts shipped to the UK as i have a few inserts i'm just not sure where they are ,and whilst i can make them from ptfe it's easier use genuine ones
i have in the past have had bits from you but it was a long time ago and i did hear you'd stopped shipping out of the US

7624452 · « **Reply #10 on:** June 18, 2020, 03:02:28 PM »

Quote from: 7624452 on June 18, 2020, 12:56:38 AM

I will take at least four. Thanks.

I need (5) five. Thanks.

Stinger177 · « **Reply #11 on:** June 18, 2020, 03:06:21 PM »

Quote from: ped on June 18, 2020, 02:51:26 PM

currently only 3 left unspoken for but once this first batch is made and all is good i'll get another run done Dennis, i will though see if the order can be increased
Mike would it be possible to get a few of each inserts shipped to the UK as i have a few inserts i'm just not sure where they are ,and whilst i can make them from ptfe it's easier use genuine ones
i have in the past have had bits from you but it was a long time ago and i did hear you'd stopped shipping out of the US

If I can get in on those unspoken-for three, that would be sufficient for now. I really don't need six.

Dennis

ped · « **Reply #12 on:** June 19, 2020, 02:22:09 PM »

when i have the first batch ready i'll people know and will order more

YEMX · « **Reply #13 on:** June 19, 2020, 02:37:51 PM »

Most Excellent!! Many thanks

superchikn · « **Reply #14 on:** June 19, 2020, 03:54:34 PM »

Ped,
We corresponded last year on this and you told me none were available. I am thrilled to hear this news. I would like two gates please.
Thank You

ped · « **Reply #15 on:** June 20, 2020, 11:47:27 AM »

i was quite suprised when my mate who makes them agreed to do them as originally he wasn't going to do anymore
looks like i better try to get him to do 20

superchikn · « **Reply #16 on:** June 20, 2020, 01:05:21 PM »

Quote from: ped on June 20, 2020, 11:47:27 AM

i was quite suprised when my mate who makes them agreed to do them as originally he wasn't going to do anymore
looks like i better try to get him to do 20

If the order quantity you propose to him becomes a deal breaker, then I only NEED one. If it is not a problem then I will buy two for future use.
Thank you

YEMX · « **Reply #17 on:** June 20, 2020, 01:14:17 PM »

Quote from: superchikn on June 20, 2020, 01:05:21 PM

If the order quantity you propose to him becomes a deal breaker, then I only NEED one. If it is not a problem then I will buy two for future use.
Thank you

X2!!

ped · « **Reply #18 on:** June 21, 2020, 07:38:57 AM »

i'll see what he says but i'm happy to up th order if he has time to do them

superchikn · « **Reply #19 on:** June 29, 2020, 11:13:44 AM »

Quote from: Mike Baker on June 18, 2020, 11:17:32 AM

I have all 3 sizes of inserts. Email me if you need them. Please send your complete mailing info to get shipping cost with order. Not just zip. peter_built 78@hotmail.com
151A024 .177 $4.25 each
151A224 .20 $2.00 each
151A124 .22 $2.00 each
plus shipping

Mike, two .177 inserts received yesterday. Thank You, didn't think I would ever see one of those again if the one I have gets lost.

Guys,
Mike was terrific to do business with. I did not read directions correctly for using Paypal and stiffed Mike $1 on my $12 order. I asked how I should make it right and Mike told me not to worry about it. I inquired into another purchase which I would tack the dollar onto but he did not have any SSP 250 .20 barrels.
I hope that by putting in an especially good word here will make up for mistake until I can make it right.

Thank you to our advertisers!

ssp250/1389 loading gates

Author Topic: ssp250/1389 loading gates (Read 2801 times))