EDgun Leshiy EDMU gauge

[dunk50]

Ok I bought a $1400 EDgun Leshiy 3 weeks ago. It has and was advertised with a nice electronic gauge. Mine works partially and fully part of the time. Very nice when it works which is about 1% of the time. I asked Edgunwest where I bought it and  got this answer. "“That feature has been removed, they initially tried to pack too much stuff in the original gauge the new one has been updated but not a new manual”. Now obviously mine was not removed as it works sometime and Edgun still has advertising and YouTube video touting the EDMU gauge.

 I was just looking at the manual and kept playing with it and out of no where it started to work properly. I had everything that the gauge map shows. I had installed a Huma regulator and set it at 110 Bar but the factory gauge was at 120 bar. I let some air out till I got down to 109 bar and shut the grub screw down. 109 Bar is close enough. Went through all the setting ONCE and then it quit and went back to just the 3 screens I described above. It was certainly nice while it worked.

Someone point me in the direction of who to talk to. If these were sold with the gun and Edgun has some THAT WORK then I want one. If Edgun now thinks they are trash and will not work then he needs to admit it and replace with a gauge that IS WORKING. Am I wrong.

[anti-squirrel]

My EDMU has always worked correctly.  It has a slow leak...

However, the problems with the EDMUs have been well documented for a long time on multiple forums and YouTube channels.  There's also a lot of documentation over at AGN about fixes etc.  Since the gauge is really one of the last things that would help determine whether or not I purchase a PCP, I'm afraid my opinion does you no good because I am truly indifferent, and will eventually replace my EDMU with a Wika mechanical gauge.  It did not even come into consideration when I bought my Leshiy.

Best I can say is persist with Brian at EdGunWest ...  http://edgun.ru/en/contacts/ is the link to the Russian site, but Brian is the rep in the US

[dunk50]

Well just emailed with Brian at Edgun West. Sending me a new gauge. Awesome.

[anti-squirrel]

Well just emailed with Brian at Edgun West. Sending me a new gauge. Awesome.

Most excellent!

[mobilehomer]

What are you doing with the old gauge?

[dunk50]

Old gauge, don't know if he will need it back or not. will keep you in mind

[anti-squirrel]

When I replace mine with a Wika, I'll be passing it on.

[dunk50]

What is it you don't like about it Anti-S. If it works I would think it would be very useful.

[mobilehomer]

Old gauge, don't know if he will need it back or not. will keep you in mind

Thanks, I would like to play with one of these. And a bad one would be perfect.

[anti-squirrel]

What is it you don't like about it Anti-S. If it works I would think it would be very useful.

It's not that I dislike it- it is nice and has cool features... Features I don't need.

In fact, I don't really even need a gauge.  I count shots over a chrono from a fill (usually 260 bar) until it falls off, then use that as my baseline.  However, the Wika is inexpensive, and I'll be ordering a couple barrels from Brian in a month or two anyway.