Rws 34 c clip

[gatonini]

Does anyone know the size of the c clip that goes on the cocking arm pin ?


   Thanks
   Gary

[rdtricks]

Not sure of which c-clip you are looking for.  Attached is a schematic view of the Diana 34.  Are you looking for part #CL005?

[gatonini]

Yes that's it

[rdtricks]

Sorry, I can't help with the size of circlip needed.  Attached you will find a link to the actual site for the schematic sent earlier: https://www.gunspares.co.uk/products/24380/34-TO1/.  It is only listed as a circlip.  You might try contacting PyramydAir or Umarex USA (importer of the RWS 34 - same rifle I believe).  If all else fails take the part you have, CP002 - cocking lever pin, to a local hardware store and look for the required circlip piece - and purchase two just in case  Good luck!

[Sky]

I know that I hate those things. If anyone knows an easy way to deal with them let me know. I ended up buying a bunch at a local fastener supply a while back because the always fly home when taking them off or putting them on. All said I for about 100 of various sizes for 5 or so bucks.

[Yarddog]

Put a dab of red grease on it before ya take the clip off the pin

[Insanity]

I use a pick or screwdriver to pry them off and my finger to pin them down. Others put the parts in a bag.