Prod $230.62

[only1harry]

Sooooooo....


Whats everyones plans for thier* new Prods?

To shoot a lot of yellow beaks and have fun with it.  Got my first kill with the Prod today. 

Other than an LDC I ordered that will probably be it for a while.  Wife is on my back for ordering a lot of stuff including a BugBuster 3-9x32 I already got for the Prod, so I am not doing any modding for now or spending more $$.  The Prod is for Starling duty so I am not planning for power mods.  Maybe a better stock down the road...

Harry

[Buldawg76]

So it just dawned on me...

Rocker1 is making shroud extentions, theoretically you could take a few and add/remove length when/if needed. Id hope...

No I believe he is making extended shrouds as in one piece only longer than the stock one, but then again he may make just extensions to the original one as well. The ones that Jim Gaska of wicked air rifle/marmot militia made were just extensions but he has closed shop so those are no longer available.

Its best to PM rocker 1 to discuss what you desire him to make and he will let you know if its possible or not. Great member to deal with 100%.

BD

[Techie]

I ordered a shroud extension from him.  I see he is also selling full length shrouds, so he has both.

[ranchibi]

Sooooooo....


Whats everyones plans for thier* new Prods?

To shoot a lot of yellow beaks and have fun with it.  Got my first kill with the Prod today. 

Other than an LDC I ordered that will probably be it for a while.  Wife is on my back for ordering a lot of stuff including a BugBuster 3-9x32 I already got for the Prod, so I am not doing any modding for now or spending more $$.  The Prod is for Starling duty so I am not planning for power mods.  Maybe a better stock down the road...

Harry

Harry, congratulations on your first DRT with the prod! I understand the she whom I must obey part! 🤓👍

[ranchibi]

Sooooooo....
Whats everyones plans for thier* new Prods?

I am leaving mine, as described in a post in this thread a few back.   At least for a little while.  It might become a 2501P in the future. 

I have plenty of the plastic foregrips.  Just pay for shipping.

John, you wouldn’t happen to have any camo woods walker fore grips laying around would you? 🤓

Do you need one?

I might give mine up along with the pistol grips and shoulder stock, but im keeping the shroud lol.

Skeeter, don’t need it..but WANT ONE as I wanted the Woods Walked but wasn’t worth the extra coin...do like the camol look. If you want to part with your front stock I’d gladly purchased it from you! Thank you!

[ranchibi]

So it just dawned on me...

Rocker1 is making shroud extentions, theoretically you could take a few and add/remove length when/if needed. Id hope...

Yes...true true! But, a one piece extended baffled shroud with carbon fiber wrap for not much more coin...yup!

[ranchibi]

Sooooooo....
Whats everyones plans for thier* new Prods?

I am leaving mine, as described in a post in this thread a few back.   At least for a little while.  It might become a 2501P in the future. 

I have plenty of the plastic foregrips.  Just pay for shipping.

Il take 1!

 Skeeter, another thought, if you want a black front stock we can trade or I’ll just pay for the camo and send you the black, that way you only pay shipping same as for John’s.

[Buldawg76]

Rocker1 has the full length shrouds listed in the hobbyist gate for sale right now. I have one on the way for my 1720T.

https://www.gatewaytoairguns.org/GTA/index.php?topic=166268.0

BD

[Buldawg76]

Thats a good deal. Personaly i want to keep my woods walker shroud on and just get an extention. This info will come in handy.

You can always get the full length shroud and wrap it in camo like the factory one is .

BD

[FuzzyGrub]

I was pawing through my shelves and found these SS kits I put together a year or so ago.  I was waiting on a guy from Poland who was going to make a matching SS safety, which never happened.  Some easy bling for your new Prods.   

https://www.gatewaytoairguns.org/GTA/index.php?topic=166296.0

[Rick67]

I was pawing through my shelves and found these SS kits I put together a year or so ago.  I was waiting on a guy from Poland who was going to make a matching SS safety, which never happened.  Some easy bling for your new Prods.   

https://www.gatewaytoairguns.org/GTA/index.php?topic=166296.0

Mr. John, is the safety the same for the 22xx,13xx, and 17xx models?

I know they are the same for the 22xx and 13xx though but not too sure about the 17xx because it has a somewhat different trigger design  .

[Buldawg76]

I was pawing through my shelves and found these SS kits I put together a year or so ago.  I was waiting on a guy from Poland who was going to make a matching SS safety, which never happened.  Some easy bling for your new Prods.   

https://www.gatewaytoairguns.org/GTA/index.php?topic=166296.0

Mr. John, is the safety the same for the 22xx,13xx, and 17xx models?

I know they are the same for the 22xx and 13xx though but not too sure about the 17xx because it has a somewhat different trigger design  .

All the same.

BD

[Rick67]

I was pawing through my shelves and found these SS kits I put together a year or so ago.  I was waiting on a guy from Poland who was going to make a matching SS safety, which never happened.  Some easy bling for your new Prods.   

https://www.gatewaytoairguns.org/GTA/index.php?topic=166296.0

Mr. John, is the safety the same for the 22xx,13xx, and 17xx models?

I know they are the same for the 22xx and 13xx though but not too sure about the 17xx because it has a somewhat different trigger design  .

All the same.

BD

I see.

Thanks, BD sir  .

[Buldawg76]

Thats a good deal. Personaly i want to keep my woods walker shroud on and just get an extention. This info will come in handy.

You can always get the full length shroud and wrap it in camo like the factory one is .

BD

Im to assume it being wrapped in carbon fiber, its probably already a tight fit in the barrel band. The camo on the woods walker gear is hydro dipped, not sure if that will even adhear to the carbon fiber, let alone its costly.

I did not know the camo was a hydro dipped coating on the woods walker. I believe there is plenty of room in barrel band for carbon fiber wrap but if not then it can be removed and the shroud painted. I prefer the matte black anyway so not a big deal to me either way.

Did not consider cost either.

BD

[Rocker1]

 I have real tree camo on the way one glossy and one matt. I have some now but its not long enough and would be 2 pieces. That stuff can be a real pain to put on.  David

[ranchibi]

David, your carbon wrap is awesome...thank you! Makes the whole PRod look stealthy!

[Buldawg76]

David, your carbon wrap is awesome...thank you! Makes the whole PRod look stealthy!

Got a pic or two.

BD

[Rick67]

Could anyone please provide me the exact length of a PROD breech (bolt not included)?

Millimeters would be nice, gents  .

Thank you!

[FuzzyGrub]

Could anyone please provide me the exact length of a PROD breech (bolt not included)?

Millimeters would be nice, gents  .

Thank you!

Calipers couldn't open that far.  6.25" per tape measure.

[Rick67]

Thank you, Mr. John!

Are you still in need of a stainless 13xx/22xx safety?

I have 2 extras in case you want one  .

A gift and not for sale, of course  .

They are Don C. creations.