NOE slugs .22 precision?

[Atom]

I ask people who have NOE slugs(no pellets) .22 to share experiences with them, which barrel and speed and group on long range minimum speed for precision, the need for sizing , photo video pls 

[Wayne52]

I'm not a target shooter but I can vouch that the 217-30-RF BBT's in hollow point are fantastic.  I haven't shot on a range since I trained in the service many moons ago.

The slugs are extremely accurate from my Airmax Dominator and here's a slug that I recovered from a large fox squirrel today that was in the very top of a hickory tree
at probably 35 yards at a 45 degree angle this morning.

[subscriber]

Ante,

Perhaps more information about that in this section of the forum:  https://www.gatewaytoairguns.org/GTA/index.php?board=229.0

For instance:
https://www.gatewaytoairguns.org/GTA/index.php?topic=161739.0
https://www.gatewaytoairguns.org/GTA/index.php?topic=160991.0
https://www.gatewaytoairguns.org/GTA/index.php?topic=157608.0

[Atom]

Ante,

Perhaps more information about that in this section of the forum:  https://www.gatewaytoairguns.org/GTA/index.php?board=229.0

For instance:
https://www.gatewaytoairguns.org/GTA/index.php?topic=161739.0
https://www.gatewaytoairguns.org/GTA/index.php?topic=160991.0
https://www.gatewaytoairguns.org/GTA/index.php?topic=157608.0

Thanks for the links, it's hard for me to find in a sea of information...

[subscriber]

it's hard for me to find in a sea of information...

You might have noticed, the mods moved your thread to its appropriate gate.

The search engine here is not the most efficient. Using google to search for topics on gatewaytoairguns.org is often faster.  That said, it helps to browse the "gates" at least two levels down, to see what type of information each has.

[KnifeMaker]

I use a lot of NOE molds, and mod many of them. Here are a few results.


Seems the 1-16 work best for the longer bullets, adn 1-20 for the shorter bullets.


I am having very good luck after figuring this out. the little PP 700 is unreal with the modded .223 bullet sized to .216.


In fact, I am fitting a .22 barrel designed for .22 sorts tonight. It is a Brownells offering in barrel liners. 


Here is a pic or two of how it performs in the PP 700 Artemis pcp pistol.


the green target says NOE Pellets, however, it is the modded bullets at 29 grs. right click for full size pic's.


The 18 NOE's in th1 inch target dot are from the Rainstorm with the .22 long rifle barrel liner in the Rainstorm II.


Knife

[Atom]

I use a lot of NOE molds, and mod many of them. Here are a few results.


Seems the 1-16 work best for the longer bullets, adn 1-20 for the shorter bullets.


I am having very good luck after figuring this out. the little PP 700 is unreal with the modded .223 bullet sized to .216.


In fact, I am fitting a .22 barrel designed for .22 sorts tonight. It is a Brownells offering in barrel liners. 


Here is a pic or two of how it performs in the PP 700 Artemis pcp pistol.


the green target says NOE Pellets, however, it is the modded bullets at 29 grs. right click for full size pic's.


The 18 NOE's in th1 inch target dot are from the Rainstorm with the .22 long rifle barrel liner in the Rainstorm II.


Knife

Thanks Knife for info.
I have SPA pr900w 5.5 mm (.22) 85J+ (62+ fpe). It is difficult to introduce NOE molds in EU (Europe). I know you have experience with MP Molds from Slovenia, what do you think of them, which is the min. speed for precision, which twist rate? I think SPA barrels they have no choke and who MP mold recommend 5.52mm or 5.55mm?

[rintafile]

How is it difficult order molds from NOE? I've been order from NOE huge pile of molds. Also from Accurate molds etc. MP Molds products very good quality molds and good price. Thats my current place to order. NOE haven't product quite some time any molds for my purpose.
There is always possibility to size bullets on right diameter. You should measured your barrel diameter.
 From NOE you could buy quite nice sizing system which can attached on Lee's presses. So you can order sizing dies and shoot that diameter bullets which fits your guns barrel best.

[Atom]

How is it difficult order molds from NOE? I've been order from NOE huge pile of molds. Also from Accurate molds etc. MP Molds products very good quality molds and good price. Thats my current place to order. NOE haven't product quite some time any molds for my purpose.
There is always possibility to size bullets on right diameter. You should measured your barrel diameter.
 From NOE you could buy quite nice sizing system which can attached on Lee's presses. So you can order sizing dies and shoot that diameter bullets which fits your guns barrel best.

Good info that you didn't have a problem with customs service.

[rintafile]

Good info that you didn't have a problem with customs service.

No problems at all. Some shipments custom picked up and I paid custom fees and taxes and some shipments pass through without any inspection. ITAR statutes doesn't apply on molds.

[Wayne52]

Here's a nicely mushroomed slug that I recovered from a fox squirrel this morning, I love these slugs.

[KnifeMaker]

My only experience with the MP molds is the .25 mold in 8 cavity. It is very-very accurate in the 20" de-choked L/W barrel. 


Knife