NOE .22 cal. Pellet Moulds

[rsterne]

The .22 cal Wadcutter is now in the store....

http://noebulletmolds.com/NV/index.php?cPath=24_601&osCsid=muirdlcvhtn653klqasbb16010

and the .22 cal Hunter is back in stock....

http://noebulletmolds.com/NV/index.php?cPath=24_587&osCsid=muirdlcvhtn653klqasbb16010

Bob

[Wayne52]

I just ordered the .217 wadcutter, been looking forward to this mold for my Crosman 150's especially.

[miksatx]

I'm with ya Wayne I picked up the 217 wadcutter and the 217-20 in the alumnium.

[Wayne52]

Michael I REALLY like the 217-20-RF mold, I shoot a lot of them these days from my Liberty and Freedom, they shoot fantastic and I doubt very much that you won't like them too

[BSJ]

Do the Hunters come with multiple pins like the Magnums?

[K.O.]

Man Times of money and no molds in the past... right now its molds and no money...can not figure which is worse... well I hope there is one of the 20g hunters left in a month or so..

[Wayne52]

Do the Hunters come with multiple pins like the Magnums?

Yes they do Brian . . . the last mold that I bought I got it in aluminum, I think from now on that any mold that I plan on using a lot will definitely be brass, I almost forgot how much I like a brass mold, especially because they don't need the break in time like an aluminum one does.  I have never over heated one either and all my brass molds still work fantastic.

[BSJ]

Do the Hunters come with multiple pins like the Magnums?

Yes they do Brian . . . the last mold that I bought I got it in aluminum, I think from now on that any mold that I plan on using a lot will definitely be brass, I almost forgot how much I like a brass mold, especially because they don't need the break in time like an aluminum one does.  I have never over heated one either and all my brass molds still work fantastic.

Cool. They're not mentioned on the Hunter's page like the Magnums.  What are the weight ranges for the various pins?  I think there was a general description of the pins, But I can't find it...

[Wayne52]

I was so hooked on my 19.6 grainers I never even bothered casting with the heavier pins, I'm serious about how well they shoot, they're just as good as the JSB 18.13's if not better in my guns IMO.  They are a heck of a lot better for hunting too because of the meplat, it's not like a hollow point but in between a round nose and a hollow point.  I've had the Hunter magnums fragment at 30 yards through a squirrel skull but they were doing about 38fpe at the muzzle too, I shoot the hollow points from that gun now, those things will tear stuff up big time.

[BSJ]

Is the "20" in the description the lightest 'theoretical' weight with the longest pin? 

[Wayne52]

Is the "20" in the description the lightest 'theoretical' weight with the longest pin? 

On paper I think that's what Bob figured that it would be but in my case the 19.6 grain is the ideal size that mine spits out with the longest pins.  If I start with good clean pure lead that's what my scale reads on the ideal ones.  That's about all I've been shooting lately but I'll be getting my Airmax back out again and using the 27.5 grain hollow points in it, I really love the scope that I put on that gun to begin with, it's a BSA, it's got really nice glass in it.

[Bob Pratl]

Michael I REALLY like the 217-20-RF mold, I shoot a lot of them these days from my Liberty and Freedom, they shoot fantastic and I doubt very much that you won't like them too

After a LONG wait for this mold to get back in production I finally got to order one.

[Wayne52]

Michael I REALLY like the 217-20-RF mold, I shoot a lot of them these days from my Liberty and Freedom, they shoot fantastic and I doubt very much that you won't like them too

After a LONG wait for this mold to get back in production I finally got to order one.

you'll love them no doubt Bob, I'll be shooting my 19.6 grainers from both my Crosman 150 and ATI Freedom this morning. The last few days I've been out I've had a lot of close up shots I couldn't do with a scope and my pistol would have been very handy.

[miksatx]

Wayne I've got the 217-20 in brass it's the one that cast the hairy pellets lol. I got the aluminum cause the brass one gets pretty heavy or at least to me it feels that way. I may have brought on the hairy pellets from drilling my spout a bit bigger.

[Insanity]

I dont know which one I want more the wadcutters or the 20gn hunters.

[Wayne52]

Matt you know that wad cutters are generally for close up, the hunters would be a better choice for shooting 30 yards or more.  I like the idea of the wadcutters for pistols myself.

[Insanity]

Matt you know that wad cutters are generally for close up, the hunters would be a better choice for shooting 30 yards or more.  I like the idea of the wadcutters for pistols myself.

The wad Cutters would be used for my attic range only so max 10y.

[Wayne52]

Matt those 25 cal wadcutters aren't bad as long as you don't shoot them much over 700fps, any higher and they aren't much good for accuracy.

[Nvreloader]

Wayne
I am waiting on your report on how well the WC do in your 150 pistol,
I have the funds just a waiting and hoping..............for the go ahead...............

Tia,
Don

[Wayne52]

Don I'll be casting some up soon because I've got the tracking number already and it won't be long before it's here